Effect of projectile parameters on opening behavior of PELE penetrating RC target

When a penetrator with enhanced lateral effect (PELE) impacts on a reinforced concrete (RC) target, the target is damaged with a large opening. An understanding of how PELE projectile parameters affect the opening dimension, is essential for effective design of the PELE projectile. In this study, under the condition that the impact velocity and target parameters (strength and thickness) were fixed values, the important influence factors of the PELE (jacket wall thickness B, jacket material strength Y1, filling material strength Y2 and angle of monolithic jacketθ) were determined by a dimensional analysis. Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter ((D), an equivalent diameter under relative kinetic energy). Based on the test and simulation results, it is found that the influence of these factors B, Y1 andθon the deformation mode of the jacket shows a similar trend:as values of the three factors decrease, the jacket deforms from small bending deformation to large one, and then to curling deformation. This causes the opening diameter to first increase with the decrease of these three factors, and then decreases. It is well known that the bending resistance of the jacket is related to these factors B, Y1 andθ. Therefore, a plastic limit bending moment (M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target. The influence factor Y2 causes (D) to first increase with the increase of Y2, and then decreases. A formula was developed to predict the opening diameter, whose influence parameters were considered in a dimensionless way. It has been shown that the dimensionless opening diameter (D)/d1 is dependent on two dimensionless parameters Q = (d31fc/M0) and G = (fc/Y2), where d1 and fc are the outer diameter of the projectile and the compressive strength of the target, respectively.     

液管道系统动力响应的研究进展

综述了自70年代以来关于输液管道系统的动态响应问题的研究进展情况.根据管路结构的特点,将问题分为两端支撑直管、悬臂管、不稳定流直管、圆柱壳管和曲管5个部分分别进行了阐述.并在此基础上,概括了应用于该领域的一些计算方法.最后,在总结研究成果的同时分析了这一领域的研究趋向.     

正规模糊测度空间上的条件期望

讨论了次可加、具有有界变差的正规模糊测度空间上关于模糊测度、内测度及模糊积分的性质，在此基础上定义了此模糊测度空间上随机变量的条件数学期望，它是相对于经典测度空间的一个推广。     

脉冲电沉积微晶氧化镍的电致变色研究

氧化镍薄膜由于其良好的电致变色特性受到广泛的关注．作者研究了脉冲电沉积出的NiOx薄膜的电色特性,讨论了脉冲电沉积出的NiOx薄膜与恒流电沉积出的NiOx薄膜的区别．实验指出,脉冲电沉积出的NiOx薄膜的电色性能优于恒流电沉积出的NiOx薄膜．     

抗电磁干扰高分子材料的研究与应用

通过对电磁波干扰的现象分析,阐述了屏蔽作用原理及屏蔽方法,研究了表面导电材料和导电复合材料等抗电磁干扰高分子材料的性能、工艺及其屏蔽效果,并对它们的应用与发展前景进行了讨论。     

引信静态试验模拟动态试验研究

研究了用静态试验评价无线电引信质量性能的方法。分析了静态试验项目、样本量的确定,建立了各组件失效与引信失效的对应关系,提出了通过组件的失效信息计算引信失效率的方法。     

端羟基聚丁二烯热分解系统研究

本文采用热分析—气相色谱-质潜联用技术和红外光谱法系统地研究了端羟基聚丁二烯(HTPB)热分解行为与气体产物组成,考察了影响HTPB热分解的几种因素,推测了HTPB热分解的可能机理。     

国防科技大学国际学术交流论文统计分析

为了促进我校学术活动的开展,从总体上反映我校近几年来的学术研究水平和现状,总结我校在各科学领域内的学术研究成果,我们采用文献计量学的方法,根据我校各专业所覆盖的学科,利用国际上著名的八大检索系统,即英国编辑出版的《科学文摘》(SA)、美国编辑出版的《科学引文索引》(SCI)、《科学技术会议录索引》(ISTP)、《化学文摘》(CA)、《国际宇航文摘》(IAA)、《工程索引》(Ei)、《数学评论》(MR)及美国和英国联合编辑出版的《金属文摘》(MA),对我校1986-1991年发表的科技论文进行了统计分析。     

室内消火栓出水量及栓口所需水压的简化计算

本文主要通过室内消火栓的简化计算,将复杂的计算简化为查表就能直接得到消火栓栓口所需压力,为设计人员及消防工作者提供了方便。     

聚氨酯型复合推进剂的性能研究

本文研究聚氨酯型复合推进剂的力学性能和燃烧性能,给出了提高推进剂力学性能的有效途径,测试了推进剂燃烧性能的基本特征参数,采用光电子能谱(ESCA)对这种复合推进剂的界面作用机理进行了微观探讨.