马尔可夫过程的k/N系统使用任务完成能力分析

研究了任务期间允许换件维修和备件供应时k/N系统的任务完成能力.首先,利用马尔可夫过程分析了k/N系统的状态转移过程,研究了k/N系统在特定维修保障策略下的运行过程.然后,以k/N系统固定任务时间内在正常状态停留时间的分布函数作为其任务完成概率模型,并通过全概率分解和更新过程的分析方法对任务完成概率进行求解.最后,利用任务完成概率模型在Matlab中绘制了任务完成概率随任务时间、任务量、备件携行数量以及备件平均供应时间的变化曲线,讨论并分析了对任务完成概率的影响.     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

Background dominant colors extraction method based on color image quick fuzzy c-means clustering algorithm

A quick and accurate extraction of dominant colors of background images is the basis of adaptive camouflage design. This paper proposes a Color Image Quick Fuzzy C-Means (CIQFCM) clustering algorithm based on clustering spatial mapping. First, the clustering sample space was mapped from the image pixels to the quantized color space, and several methods were adopted to compress the amount of clustering samples. Then, an improved pedigree clustering algorithm was applied to obtain the initial class centers. Finally, CIQFCM clustering algorithm was used for quick extraction of dominant colors of background image. After theoretical analysis of the effect and efficiency of the CIQFCM algorithm, several experiments were carried out to discuss the selection of proper quantization intervals and to verify the effect and efficiency of the CIQFCM algorithm. The results indicated that the value of quantization intervals should be set to 4, and the proposed algorithm could improve the clustering efficiency while maintaining the clustering effect. In addition, as the image size increased from 128 × 128 to 1024 × 1024, the efficiency improvement of CIQFCM algorithm was increased from 6.44 times to 36.42 times, which demonstrated the significant advantage of CIQFCM algorithm in dominant colors extraction of large-size images.     

Blast resistance evaluation of urban utility tunnel reinforced with BFRP bars

To improve corrosion-resistance of shallow-buried concrete urban utility tunnels(UUTs),basalt fiber reinforced polymer(BFRP)bars are applied to reinforce UUTs.As the UUT must have excellent survival capability under accidental explosions,a shallow-buried BFRP bars reinforced UUT(BBRU)was designed and constructed.Repetitive blast experiments were carried out on this BBRU.Dynamic responses,damage evolutions and failure styles of the BBRU under repetitive explosions were revealed.The tunnel roof is the most vulnerable component and longitudinal cracks develop along the tunnel.When the scaled distance is larger than 1.10 m/kg1/3,no cracks are observed in the experiments.When the BBRU is severely damaged,there are five cracks forming and developing along the roof.The roof is simplified as a clamped-supported one-way slab,proved by the observation that the maximum strain of the transverse bar is much larger than that of the longitudinal bar.Dynamic responses of the roof slab are predicted by dynamic Euler beam theory,which can consistently predict the roof displacement under large-scaled-distance explosion.Compared with the UUT reinforced with steel bars,the BBRU has advantages in blast resistance with smaller deflections and more evenly-distributed cracks when the scaled distance is smaller than 1.260 m/kg1/3 and the steel bars enter plastic state.Longer elastic defamation of the BFRP bars endows the UUT more excellent blast resistance under small-scaled-distance explosions.     

A replacement model with overhauls and repairs

This article generalizes the classical periodical replacement model with minimal repair by considering the effect of the overhaul, which is assumed to be able to rejuvenate the system. The generalization is based on the notion of the virtual age of a system introduced by Kijima, Morimura, and Suzuki [“Periodical Replacement Problem without Assuming Minimal Repair,” European Journal of Operational Research, 37 , 194–203 (1988)]. © 1995 John Wiley & Sons, Inc.     

院校办学绩效集对分析评定

讨论了集对分析方法评定院校办学绩效．作为算例,对军队16所工程技术院校进行了排序,并用主成分分析法进行了验证．     

压水堆大破口失水事故安全装置实验研究

本文针对压水堆发生主管道“双端断裂”的大破口失水事故而提出了一种安全装置,对其工作原理及工程上实现的可能作了浅析,对其原理性实验过程及结果作了介绍。实验表明:这种安全装置结构简单,原理正确,工程上易实现,造价低廉。它在大破口失水事故发生初期(约数十毫秒)就能充分发挥其作用。对于防止堆芯熔化具有重要意义。     

A guarantee rate optimization model for wastewater treatment system design under uncertainty

We consider a design problem for wastewater treatment systems that considers uncertainty in pollutant concentration levels at water sources. The goal is to optimize the selection of treatment technologies and pipeline connections, so that treated wastewater can achieve specified effluents discharge limits as well as possible. We propose a new two-stage model to optimize a set of guarantee levels, that is, the maximum concentration level of source pollutants for which treated wastewater can be compliant with discharge limits. In the first stage, treatment technologies and pipeline connections are selected. In the second stage, when pollutant concentration levels are revealed, wastewater distribution and mixing are determined. A key attractiveness of the proposed guarantee rate optimization model is that it can be simplified into a single-stage mixed-integer linear program. In our numerical experiments based on real-world pollutants data, the guarantee rate model demonstrates its advantages in terms of computational efficiency, scalability and solution quality, compared with the standard probability maximization model. Finally, the methodology proposed in this paper can also be applied to other two-stage problems under uncertainty with similar uncertainty characteristics.     

大规模科学数据体绘制技术综述

体绘制是刻画大规模科学数据中复杂物理特征的有效途径,然而,数据量极大、特征难以捕捉等问题依然是目前体绘制研究的主要挑战。为此,研究者们从三个方面对体绘制算法进行了深入研究,以提高大规模数据体绘制的效率和效果。一方面,依托硬件通过多处理器核来分担计算,降低单处理器核所要完成的计算量,是提高体绘制效率的一个有效途径。另一方面,充分发掘数据场内在特性对三维数据场进行约简,大幅减少绘制处理数据量从而降低算法开销,也是提高体绘制效率的一个有效途径。同时,在体绘制算法中融入特征分析和特征增强方法,让复杂物理特征从数据场中突显出来,以实现对科学数据的高质量绘制。本文对国内外体绘制技术相关研究进展进行了调研、综述,并分析了不同的研究方法,最后展望了未来体绘制技术研究的可能发展方向,包括应用驱动的特征体绘制、基于特征的约简体绘制、适应硬件的体绘制多级加速以及原位智能化体绘制等。