月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

Investigation of normal,lateral, and oblique impact of microscale projectiles into unidirectional glass/epoxy composites

Spacesuits and spacecraft must endure high velocity impacts from micrometeoroids. This work considers the impact of 100 μm diameter projectiles into composite targets at velocities from 0.5 km/s to 2 km/s. This work begins by presenting an energy-based theoretical model relating depth of penetration (DoP) and impact force to impact velocity, characteristic time, and threshold velocity and force. Next, this work compares numerical simulations of normal impact on composites to the theoretical model. Numerical simulations are conducted with LS-DYNA and the well-known composite model, MAT-162. The numerical models consider unidirectional S2-glass fiber reinforced SC-15 epoxy composite laminates. The numerical model shows good correlation with the theoretical model. The numerical model also investigates lateral impact, parallel to the fiber direction, and oblique impact at angles from 30° to 82.5°. This work decomposes oblique impact into normal and lateral components, and compares them with normal and lateral impact results. The results show good correlation of the normal component of oblique results with the theoretical model. This numerical and theoretical study focuses on DoP, velocity, and penetration resistance force as functions of time. The theoretical model and numerical simulations are used to determine new DoP parameters: characteristic time of depth of penetration and threshold impact velocity. These models are a first step in developing the capability to predict DoP for oblique, microscale, high-speed impact on composite materials.     

基于价值工程的装备体系建设费用结构优化方法研究

科学、合理地配置费用对于加强装备体系建设、提高军队战斗力具有重要的现实意义。文章介绍了价值工程的基本原理,建立了基于价值工程的装备体系建设费用结构优化模型,并引入强制确定(Forced Decision)法,通过实例讨论了优化方法的可行性和实用性。     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

Mean residual life of coherent systems consisting of multiple types of dependent components

Mean residual life is a useful dynamic characteristic to study reliability of a system. It has been widely considered in the literature not only for single unit systems but also for coherent systems. This article is concerned with the study of mean residual life for a coherent system that consists of multiple types of dependent components. In particular, the survival signature based generalized mixture representation is obtained for the survival function of a coherent system and it is used to evaluate the mean residual life function. Furthermore, two mean residual life functions under different conditional events on components’ lifetimes are also defined and studied.     

强爆轰驱动超高速碎片发射装置设计因素分析

为了得到发射装置设计因素和超高速碎片性能间的关系,考虑了药型罩的材料、炸药种类、装药长径比、药型罩的锥角、药型罩的厚度、药型罩顶部靠近装药侧的曲率半径等设计因素,采用AUTODYNTM,结合正交试验,对超高速碎片的发射过程进行数值模拟。结果表明,3种发射装置结构分别可以提供质量为1. 533 g的紫铜碎片、速度为11. 649 km/s的铝碎片、动能为85. 6 k J的铝碎片; 2种发射装置结构均可以提供质量大于1 g、速度高于11 km/s的密实结构圆柱状碎片。验证了仿真方法的可信性,对影响碎片性能的设计因素进行了分析、排序,并得到了这些设计因素与碎片质量、速度、动能的关系。     

满足大动压模拟要求的试验弹道优化设计

为了解决弹道导弹在高海拔发射场进行飞行试验时的大动压检验问题,提出一种模拟大动压条件的试验弹道设计方法。针对发射场的实际特点,建立残骸再入的动力学模型与落区边界模型;将大动压模拟条件转化为过程约束,提出一种主动段联合优化策略。基于自适应模拟退火算法,分别设计了三组满足不同大动压模拟条件和各项约束的试验弹道,并给出了对应的落区调整方案,验证了该方法的可行性。设计结果表明,最大动压主要出现在一级,一级最大负攻角增加,则最大动压也明显提高;同时调整发射方位角和二、三级程序角可以保证试验弹道满足弹头落点约束条件。     

针对“四强”特点 培育“四力”素质

网络信息时代,面对层出不穷的不良信息,如何提高官兵抵制负面影响的素质能力,概括起来就是：要针对不良信息“腐蚀性”强的特点,不断培育官兵“乐于追随”的不变定力;要针对不良信息“迷惑性”强的特点,不断培育官兵“善于思辨”的不凡智力;要针对不良信息“煽动性”强的特点,不断培育官兵“敢于斗争”的不惧魄力;要针对不良信息“持久性”强的特点,不断培育官兵“甘于奉献”的不竭动力。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

学前儿童交通安全教育的价值探析

对学前儿童进行交通安全教育的直接目的是减少交通事故,保护其生命和身体,同时还具有重要的教育价值。基于教育价值的两个方面即教育的个人价值和社会价值,学前儿童交通安全教育的价值主要体现在对学前儿童的发展价值和以学前儿童为中心扩散开来的延伸价值。发展价值是指交通安全教育促进学前儿童的认知、动作、情意等方面的发展。延伸价值是指学前儿童获得的交通安全知识与意识、规则与行为、尊重与利他等对其成为合格的社会公民是一种自然而然的准备,同时在生态系统理论之下以儿童为中心扩散开来的重要他人、社会相关机构和行业等都会发生相应的改变,将最终有利于社会的进步。