基于方位量测的舰艇对潜定位技术研究*

结合舰艇拖曳线列阵声纳实际搜潜装备,利用舰载线列阵声纳测得的潜艇目标方位信息,建立了基于方位量测的舰艇对潜艇目标定位的数学模型,给出求解潜艇运动参数的定位算法,并对定位误差进行了分析,在定位模型及算法的基础上,仿真研究了潜艇与舰艇之间的初始距离、舰艇测得潜艇目标初始方位角、潜艇航向等因素对定位性能的影响,给出仿真结果并进行了分析,该结果对于指导实际反潜具有一定的实用价值.     

基于邻接矩阵的软件测试环境规划设计方法

在分析软件测试环境的基础上，研究了软件试验中测试用例设计面临的突出问题，从软件测试环境的规划出发，基于有向图的邻接矩阵，设计满足一定覆盖度标准的软件测试环境规划方法，可为软件试验提供技术参考和研究方向。     

基于虚拟仪器的航空电子设备检测系统设计

设计了一种基于虚拟仪器技术的航空电子设备自动化检测系统。详细介绍了系统软硬件的结构和功能。说明了通过程序、配置文件管理系统硬件,实现软件的仪器无关性的方法。并讨论了用数据库和文本文件定义被测设备的数学模型,从而实现检测系统与被测设备分离的方法。由于从检测系统和被测设备两方面实现了检测的通用性,对检测系统的升级换代和扩展检测新型机载设备具有重要意义。     

Performance evaluation and optimization design of photoelectric pyrometer detection optical system

The measurement and control of high temperature play very important roles in national defense, military, scientific experiments, industrial and agricultural production. Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement. It has an important application in the field of high temperature measurement, and its performance directly affects the accuracy of temperature measurement. By improving the design of the detection optical system of the photoelectric pyrometer, the imaging performance of the photoelectric pyrometer can be improved effectively, and the temperature measurement accuracy can be improved. In this paper, the temperature measurement principle of photoelectric pyrometer, the working principle of the detection optical system and the composition of the system are introduced. The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed. The optical pyrometer detection optical system is simulated by ZEMAX software, based on the analysis results, the Modulation Transfer Function (MTF) and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system. The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.     

通用机液平台的液压不解体检测与诊断系统设计

在分析装备液压系统检测参数体系的基础上,依据不解体测试的原则,应用流量不解体检测技术、外卡式压力检测技术和油液污染度快速检测技术,构建了基于PX I主机的液压状态检测与故障诊断系统,可实现对装备液压系统的技术状况快速准确检测、故障诊断以及技术状况趋势分析。     

舰炮武器系统维修性试验方法研究

根据现代海战的要求,对舰炮武器系统维修性试验的必要性和重要性作出分析阐述;依据舰炮武器系统的组成特点,科学地制定了维修性试验的基本程序和试验项目;给出舰炮武器系统维修性试验具体试验方案.     

美国陆军网络装备作战评估及启示

作战试验能有效地推动装备体系的建设发展，本文通过分析美国陆军网络集成评估与联合作战评估的作战试验特点，提出军队开展装备作战试验的几个建议。首先，总结了美国陆军网络集成评估到联合作战评估的发展演变，主要包括网络集成评估的地位和作用、网络集成评估的实施流程以及13次网络集成评估和3次作战评估的有关情况；其次，分析了网络集成评估的一系列作战试验特点，诸如实际作战需求牵引、逼真场景构建、试训一体化模式、部队战斗力的直接生成以及作战能力的军民融合式发展等；最后，提出了网络集成评估带来的若干启示，从满足实战能力需求开展作战试验、突出装备体系的互操作能力评估、探索试训结合的作战试验模式、组建专门的作战试验部队及鼓励工业部门参与作战试验等方面推动军队作战试验的发展。     

测试轮直径对路面不平度测试精度的影响

在加速度信号的路面不平度测量过程中,由于测试轮的几何外形对路面的滤波作用,会对功率谱密度的测量产生误差。为解决这一问题,在仿真环境下,通过测量在给定路面等级的随机路上行驶的测试装置测试轮的响应,研究不同直径的测试轮对同一路面不平度的滤波作用,分析其影响关系,从而为路面不平度测试装置测试轮轮径的选择提供参考。     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

美军作战试验与鉴定发展研究

当前,军队装备试验鉴定正由性能试验向作战试验、在役考核全领域拓展。在装备试验鉴定体系全面重塑的历史背景下,为适应军队装备试验鉴定发展新变化,探索装备试验鉴定新理论,推进装备试验鉴定自主创新发展,亟需开展装备试验鉴定技术研究。美军相对较早开展了装备试验与鉴定工作,在作战试验与鉴定工作方面已形成了较完善的法规制度体系和规范的操作流程,有较成熟的理论与方法成果可供借鉴。与此同时,美军作战试验与鉴定工作也面临许多新问题。本文剖析了美军作战试验与鉴定的内涵和管理模式,研究了2018和2019年美军作战试验与鉴定的重点技术领域,并进行了对比分析,以期掌握近期美军作战试验与鉴定工作的发展变化。