改进的GPS弱信号差分捕获方法研究

捕获是GPS接收机信号处理中的关键部分,在微弱信号情况下,传统的弱信号捕获方法不能很好地捕获到卫星信号,采用一种改进的GPS弱信号差分捕获方法来进行捕获研究.并对一组GPS的数据信息,分别采用以上2种方法对其进行捕获仿真.结果显示,新方法可以捕获到较微弱的GPS信号,提高了接收机的灵敏度.     

一种基于知识因素表示理论的装备信息分类描述方法

当前信息分类的形式化描述是信息集成中一个研究重点和难点,基于知识的因素表示理论能够描述概念和概念之间的关系,并通过概念之间的关系描述概念的语义,该方法具有知识描述的统一框架和严格的数学理论基础.通过对装备信息分类方法研究,提出了装备全系统全寿命信息体系结构模型和基于知识因素表示理论的装备信息分类描述方法,并结合装备基础...     

平台惯性导航系统仿真器的设计

针对平台惯性导航系统的特点,提出了一种平台惯导仿真器的设计方案,通过对导航系统进行模块分解,建立了主要仿真模型,完成了平台惯导仿真器的开发和实现。仿真结果符合平台惯性导航系统的物理特性,实践证明该仿真器可为导航算法、导航系统滤波器的研究提供仿真支持。     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

Fullerene bisadduct stabilizers: The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose (NC)/nitroglycerine (NG), we synthesized N-(4-methoxy) phenylpyrrolidine-C₆₀ and four different of bis(N-(4-methoxy) phenylpyrrolidine)-C₆₀ compounds through Prato reaction. Their structures were characterized by UV–vis, ¹H NMR, ¹³C NMR, high-resolution mass spectroscopy, and single-crystal X-ray diffraction. Their stabilization effect to NC/NG were investigated using differential scanning calorimetry, methyl violet, vacuum stabilization effect, weight loss, and accelerating rate calorimeter tests. The results indicated these compounds had excellent stabilization effect to NC/NG. The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C₆₀. Moreover, the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different, and its stabilization effect to NC is also different. The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows: e-edge > trans-2> cis-2> trans-3. Electron paramagnetic resonance (EPR) and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG. The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide, and their ability is better than that of the monoadduct and C₆₀, which is consistent with the results of stabilization effect performance test.     

太空信息支援指挥控制支持平台构建初探

针对当前太空信息支援指挥控制存在的诸如缺少统一平台进行需求综合、数据汇集和融合处理,各类数据和产品分散管理,分头为用户提供信息保障服务等现实问题,本文对太空信息支援指挥控制相关问题进行了研究,构建了太空信息支援指挥控制任务模型,并对太空信息支援指挥控制任务进行了分析。按照系统结构设计的思想,从太空信息资源提供者、太空信息资源使用者和太空信息系统管理者三个角度提出了太空信息支援指挥控制支持平台的功能需求;研究了太空信息支援指挥控制支持平台的系统组成,并按照"资源+服务+应用"的设计原则构建底层可共用基础平台,中间层提供支撑软件集成,上层面向各级各类用户系统的支持平台技术架构和相应物理架构,解决了指挥控制支持平台"建什么、怎么建"的关键问题,可为太空信息支援指挥控制支持平台设计提供理论参考。     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

基于RTP协议H．264视频流传输QoS保证的研究

提出一个Linux环境下基于RTP/RTCP的H.264视频流传输的方案,在Linux中调用V4L(VideofourLinux)的API函数采集视频流,经X264压缩,RTP/RTCP协议打包进行传输。并通过RTCP的RR(接收方报告)包反馈信息和吞吐量公式来计算近似带宽,以起始帧量化参数start-qp为视频编码的调节参数,由近似带宽来控制视频编码的参数调整,达到控制输出码率的目的,实现对视频传输的QoS(QualityofService)保证。     

自主式车载组合导航系统研究与仿真

考虑到车载组合导航系统运行时间长、地形环境复杂的特点,将零速修正技术与惯导/里程计/气压高度表组合导航系统相结合使用,采用序贯处理和平方根滤波算法,建立了实用的卡尔曼滤波模型。相比基本卡尔曼滤波算法,该方法实现简单,计算量小,抑制了滤波的发散,提高了滤波的精度。最后对组合导航系统进行仿真验证,取得了较为满意的结果。与INS/GPS组合导航系统相比,该系统具有良好的自主性及适应性。