光码分多址系统中多维地址码的构造及分析

光码分多址（OCDMA）技术主要运用于接入网中,设计大容量、低误码率的地址码是该技术实用化的前提。本文在光正交码（OOC）的基础上,分析了二维光正交码（2D—OOC）和三维光正交码（3D—OOC）的构造方法,并对三种地址码的性能进行了数值仿真。结果表明：三维地址码容量最大,带宽利用率较好,误码率较低,表现出的性能整体较好。     

时钟漂移对GPS/BD2组合系统精度影响分析

首先针对GPS时钟漂移,推导了计算位置误差的表达式,然后对GPS/BD2组合系统的时钟漂移进行了分析和修正,并利用模拟信号源提供的信号进行了仿真.结果表明:经过时钟漂移修正后,定位精度有了一定的提高,验证了仿真结果.     

“又＋动1＋又＋动2”格式之考察

本文对收集到的＂又＋动1＋又＋动2＂格式的语料进行了定量、定性分析,从它的构成形式、语义特点、位序特点、语法功能四个方面概括了这一格式的特点,并比较分析了这一格式与＂又＋形1＋又＋形2＂格式的相同点和不同点,以及与其它并列格式的区别。以期对＂又A又B＂格式的特点有个更全面、准确地把握。     

超细粒子对环氧树脂的增韧改性研究

用NW-2辛酯偶联剂改性过的复合氧化锌(ZnO)超细粒子对环氧树脂进行增韧,借助于SEM和力学性能测试手段研究了ZnO粒子的形貌以及NW-2辛酯偶联剂改性复合ZnO粒子在环氧树脂体系中的增韧情况及其机理.结果表明:经过NW-2辛酯偶联剂改性的复合超细ZnO粒子对环氧树脂具备良好的增韧效果.     

Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the param-eters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0％to 15％,every 5％increase of aluminum resulted in about a 1.3％decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14％and 8％higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 μs throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12％and 2.9 μs higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80％of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.     

Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas

High nitrogen stainless steel with nitrogen content of 0.75％was welded by gas metal arc welding with Ar—N2-O2 ternary shielding gas. The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified. Surfacing test was conducted first to compare the ability of O2 and CO2 in prompting nitrogen dissolution. The nitrogen content of the surfacing metal with O2 is slightly higher than CO2. And then Ar—N2-O2 shielding gas was applied to weld high nitrogen stainless steel. After using N2-containing shielding gas, the nitrogen content of the weld was improved by 0.1 wt％. As N2 continued to increase, the increment of nitrogen content was not obvious, but the ferrite decreased from the top to the bottom. When the proportion of N2 reached 20％, a full austenitic weld was obtained and the tensile strength was improved by 8.7％. Combined with the results of surfacing test and welding test, it is concluded that the main effect of N2 is to inhibit the escape of nitrogen and suppress the ni-trogen diffusion from bottom to the top in the molten pool.     

激光防空武器系统作战效能研究

激光防空武器系统是一种新型的高技术多指标综合武器系统,其作战效能评估即是研究新型武器系统装备的主要依据,又是一件十分艰难的任务。依据WSEIAC提出的效能分析模型,建立了激光防空武器系统的ADC模型,对激光防空武器系统的作战效能作了研究,对其他武器的效能分析具有示范和借鉴作用。     

基于XML的结构设计方法在武器器材管理中的应用

提出了基于标准XML、简化XML的编码结构设计方法并用于武器器材管理。该方法可方便实现不同武器器材的二维条码和电子标签结构设计,具有通用性和兼容性,可消除因编码结构不同而导致的“信息孤岛”效应,具有良好的扩展性和灵活性。     

基于径向基函数神经网络的漏磁信号反演

采用径向基函数神经网络的方法对漏磁信号反演进行了研究,由实验数据和仿真数据获得样本,在网络训练的基础上,建立了由缺陷的漏磁信号到缺陷二维轮廓图的网络映射,实现了缺陷二维轮廓图的漏磁反演,为漏磁定量化检测提供了一种可行的方法。     

反导作战管理技术研究

反导作战管理技术是指对反导体系内的传感器和火力资源进行以任务规划为核心的指挥与控制技术,主要包括传感器资源作战管理和火力资源作战管理两大部分。首先对反导作战管理与指挥控制系统的发展情况进行了简要分析,然后针对反导作战管理技术的内涵、主要任务、层次结构进行了系统研究,最后初步探讨了反导作战管理的核心内容和涉及的关键技术。