纤维增强SiO2气凝胶隔热复合材料的制备及其性能

将无机陶瓷纤维与SiO2溶胶混合,经超临界干燥制备了SiO2气凝胶隔热复合材料。SiO2气凝胶纤细的骨架颗粒减少了固态热传导,纳米级孔减少了气体热传导和对流传热,同时无机陶瓷纤维减少了辐射传热。SiO2气凝胶复合材料具有良好的隔热性能,其200℃和800℃的热导率分别为0.017W/m.K和0.042W/m.K。纤维的加入提供了力学支撑,高温处理增强了气凝胶骨架强度,材料在常温和高温下均具有良好的力学性能,其常温的拉伸、弯曲和抗压强度分别为1.44MPa、1.31MPa和0.98MPa(10%应变),800℃的拉伸、弯曲和抗压强度分别为1.95MPa、1.80MPa和1.42MPa(10%应变)。     

碳纳米管场效应管尺寸缩小特性的比较

由于具有更为显著的量子隧穿效应,碳纳米管场效应管具有较硅基MOS管不同的尺寸缩小特性,同时,由于工作机理的不同,类MOS碳纳米管场效应管(C-CNFETs:Conventional MOS-like Carbon Nanotube Field Effect Transistors)的尺寸缩小特性与隧穿碳纳米管场效应管(...     

Thermal and combustion behavior of Al-MnO2 nanothermite with poly(vinylidene fluoride -co- hexafluoropropylene) energetic binder

Fluoropolymers get increasing attention in energetic materials application due to the high fluorine content. To explore the effect of poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) on Al/MnO2 nanothermite, the samples with different contents are prepared and characterized by SEM, TG-DSC, XRD, and their ignition and combustion behavior are tested and recorded. The results show that P(VDF-HFP) as an energetic binder can combine the nanothermite components together, even exist in the gaps. The integrity of energetic materials has been improved. Thermal analysis shows that the addition of P(VDF-HFP) greatly changes the thermal reaction processes, and the exothermic peaks appear early, but the utilization of fuel and oxidizer is not efficient from the XRD results. Furthermore, the appropriate addition of P(VDF-HFP) can directly reduce the ignition energy threshold and increase the combustion time, which is necessary for the potential ignition charge application. The possible reasons for above phenomena are discussed and analyzed. This research provides a reference for improvement of thermite-based ignition charge formulation.     

Combustion characteristic and aging behavior of bimetal thermite powders

Nanothermites have been employed as fuel additives in energetic formulations due to their higher en-ergy density over CHNO energetics. Nevertheless, sintering and degradation of nanoparticles signifi-cantly limit the practical use of nanothermites. In this work, combustion characteristic and aging behavior of aluminum/iron oxide (Al/Fe2O3) nanothermite mixtures were investigated in the presence of micron-scale nickel aimed to produce bimetal thermite powders. The results showed that the alumina content in the combustion residue increased from 88.3％ for Al/Fe2O3 nanothermite to 96.5％ for the nanothermite mixture containing 20 wt％nickel. Finer particle sizes of combustion residue were obtained for the nanothermite mixtures containing nickel, indicative of the reduced agglomeration. Both results suggested a more complete combustion in the bimetal thermite powders. Aging behavior of the nano-thermite mixture was also assessed by measuring the heat of combustion of the mixture before and after aging process. The reduction in heat of combustion of nanothermite mixtures containing nickel was less severe as compared to a significant decrease for the nanothermite mixture without nickel, indicating better aging resistance of the bimetal thermite powders.     

软件的测试性分析与设计

软件测试是提高软件可靠性的重要手段,但软件测试的代价是巨大的。软件的测试性分析与设计是分析软件测试的复杂性,提高软件测试性的基本方法。本文提出了软件测试性的基本概念、分析与计算方法、以及软件测试性设计的基本思路。这对于高可靠性软件,特别是武器装备软件的设计是有指导意义的。     

神经网络的函数逼近理论

分析了将函数逼近理论与方法引入神经网络研究的必要性；从经典函数逼近与统计分析两方面详细地讨论了多层前馈网（ＭＬＰ）逼近能力分析的基本方法及结论；分析了正则理论观点下的径向基函数网络（ＲＢＦ）的逼近能力；讨论了ＲＢＦ网与多层前馈网在最佳逼近特性上的差异。文末指出了神经网络函数逼近的发展方向。     

三种坦克变速箱润滑油的试验研究

按GB/T12583—90标准,对三种坦克变速箱润滑油（50号机油,80号坦克齿轮油和18号双曲线齿轮油）进行实验室和实车评定。选择变速箱四档主动齿轮齿厚最大磨损部位磨损速率作为评定润滑油润滑效果优劣的判据:通过三台59式坦克近300摩托小时的实车试验,测定了分别采用三种润滑油的齿厚磨损速率,得出了18号双曲线齿轮油的使用性能最好,80号坦克齿轮油次之,50号润滑油最差的结论,为部队合理使用坦克变速箱润滑油提供了依据。     

雷达抗干扰性能的测量研究

本文提出用得益矩阵对雷达抗干扰性能进行度量,对得益矩阵的建立及其在雷达抗干扰性能度量方面的应用进行了分析,并设计出一套自动测试系统,对雷达抗干扰改善因子进行测量。     

单片机控制的指挥仪航路产生系统

本文首先介绍单片机控制的指挥仪航路产生系统的原理及组成,重点讨论了目标现在点坐标由数字量到指挥仪所需要的模拟信号的转换方法,最后对该系统的误差结果进行了分析。     

Scheduling stochastic jobs with asymmetric earliness and tardiness penalties

We consider a stochastic counterpart of the well-known earliness-tardiness scheduling problem with a common due date, in which n stochastic jobs are to be processed on a single machine. The processing times of the jobs are independent and normally distributed random variables with known means and known variances that are proportional to the means. The due dates of the jobs are random variables following a common probability distribution. The objective is to minimize the expectation of a weighted combination of the earliness penalty, the tardiness penalty, and the flow-time penalty. One of our main results is that an optimal sequence for the problem must be V-shaped with respect to the mean processing times. Other characterizations of the optimal solution are also established. Two algorithms are proposed, which can generate optimal or near-optimal solutions in pseudopolynomial time. The proposed algorithms are also extended to problems where processing times do not satisfy the assumption in the model above, and are evaluated when processing times follow different probability distributions, including general normal (without the proportional relation between variances and means), uniform, Laplace, and exponential. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44, 531–557, 1997.