A partial characterization of the optimal ordering/rationing policy for a periodic review system with two demand classes and backordering

We consider a finite horizon periodic review, single product inventory system with a fixed setup cost and two stochastic demand classes that differ in their backordering costs. In each period, one must decide whether and how much to order, and how much demand of the lower class should be satisfied. We show that the optimal ordering policy can be characterized as a state dependent (s,S) policy, and the rationing structure is partially obtained based on the subconvexity of the cost function. We then propose a simple heuristic rationing policy, which is easy to implement and close to optimal for intensive numerical examples. We further study the case when the first demand class is deterministic and must be satisfied immediately. We show the optimality of the state dependent (s,S) ordering policy, and obtain additional rationing structural properties. Based on these properties, the optimal ordering and rationing policy for any state can be generated by finding the optimal policy of only a finite set of states, and for each state in this set, the optimal policy is obtained simply by choosing a policy from at most two alternatives. An efficient algorithm is then proposed. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

一种运用遗传算法确定船舶航向控制模糊规则的方法

为了克服船舶航向控制模糊规则确定过程中的盲目性,引入一种与之相适应的遗传算法,以使结果成为某种意义下的最优解,从而从根本上解决这一重要问题.文中运用Matlab的C语言MEX-文件技术,将遗传算法源代码与Matlab直接结合起来,利用后者的强大建模能力,建立起完整的仿真模型.仿真结果表明,船舶的航向控制能力得到明显改善.     

0.18 μm CMOS工艺的GPS/BDS双模可重构接收机射频前端

采用低中频架构设计了一种0.18μm CMOS工艺的GPS/BDS双模可重构接收机射频前端,能在GPS L1模式或BDS B1模式下工作。通过频率自适应电路调整中频滤波器的时间常数,降低其频率不确定度;压控振荡器中加入4位开关电容阵列,以提高频率调谐范围和相位噪声性能;通过硬件复用的方式降低系统功耗。测试结果表明,在1.8 V电源电压下,功耗37.8 m W,电压增益为103 d B,GPS L1和BDS B1波段噪声系数均小于3.2 d B。     

基于ADC的炮兵激光观测仪侦察效能分析

运用了效能分析方法,针对复杂战场环境下炮兵侦察系统的效能进行分析,特别是炮兵激光观测仪,揭示其内在规律,为提高现有侦察装备的作战效能找到重要途径,也为指挥员的决策提供可靠的战略支持.在侦察系统效能分析理论的基础上,对典型的激光观测仪侦察装备进行了计算评估验证,其方法和成果可供其他武器系统效能评估时借鉴参考.     

弹丸速度的数字化激光幕测试技术

针对传统弹丸速度测量方法的局限，提出一种新的弹丸速度测试技术——数字化激光幕结合互相关速度测量算法的测试技术，并给出了激光总体测速方案、测速原理以及互相关测速方法，经靶场试验验证测试效果良好。     

基于复合信号的激光陀螺零偏误差补偿分析

作为一种集成了光学、电学和机械力学的复杂系统，激光陀螺可以精确地测量物体的角速率输出。为了满足惯性导航系统长时、高精度的测量要求，研究了激光陀螺内部不同类型的传感器与激光陀螺零偏误差之间的特性，在传统的基于温度的零偏误差补偿方法的基础上，引入了二频机抖激光陀螺内部温度传感器、光电二极管和粘在抖动机构上压电陶瓷的输出信息进行复合建模，利用非线性拟合能力强的支持向量机算法，针对不同类型信息与二频机抖激光陀螺零偏误差的相关性对模型进行优化。实验结果表明，该二频机抖激光陀螺零偏误差补偿模型的补偿精度高于传统的补偿方法。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

基于DSP+FPGA的导航计算机数据采集与处理硬件设计

根据捷联惯导系统中数据采集和运算处理的要求,提出了以高性能DSP为核心,由FPGA构成主要外部输入输出接口的导航计算机硬件设计方案;设计了I/F转换电路;给出了各电路的硬件结构框图和各器件的特性、选择与应用。从硬件方面分别讲述了FPGA和DSP的工作过程和功能。利用本方案,对实现军事和工程领域中导航系统微小型化、降低系统成本和体积具有重要意义。     

舰载雷达零位标校新法

对目前现有舰载火控雷达零位标校的方法和技术做了简单概述,提出了一种基于差分GPS、CCD、激光经纬仪等技术相结合的零位标校新法,给出了系统硬件组成和算法原理,对系统误差影响因素做了分析。实践标明此系统可以有效的克服由于舰体的摆动而对测量精度的影响,并极大的改善了标校的灵活性与机动性。标校系统测量真值位置精度优于50 cm,相应真值角度精度优于0.05 mrad,满足舰载雷达标校精度要求。     

基于结构光的柱体工件直径测量

为实现柱状工件直径的实时快速非接触测量,利用结构光原理,对柱体直径的视觉测量方法进行了研究.详细介绍了结构光法测直径的原理和步骤,以及激光平面的标定和坐标变换求解空间二次曲线方程及特征参数的方法.实验证明该方法测量速度快,精度适中的特点,适用于大批量产品在线测量,亦适用于恶劣环境下的测量.