Force chains based mesoscale simulation on the dynamic response of Al-PTFE granular composites

Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminum-polytetrafluoroethylene (Al-PTFE) granular composites under a low-velocity impact. A two-dimensional model followed the randomly normal distribution of real Al particles size is developed. The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments. The results indicate that, force chains behavior governed by the number and the size of agglomerated Al particles, significantly affects the impact response of the material. The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density. A high crack area of the material is critical mechanism to arouse the initiation re-action. The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance. In addition, simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials. It is found that smaller sized Al particle of com-posites are more preferred than its bulky material in ultimate strength. Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number. The simulation studies provide further insights into the plastic deformation, failure mechanism, and possible energy release capacity for Al-PTFE composites, which is helpful for further design and application of reactive materials.     

Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.     

加速度计动态误差系数标定的仿真研究

为了简化加速度计动态误差系数的标定过程,缩短标定试验时间,在建立加速度计动态误差数学模型的基础上,结合三轴转台模型及测试原理,一次性标定出加速度计动态误差系数,同时避免了角振动台的使用。最后利用MATLAB软件进行仿真试验,得到了较好的结果。     

动网格在仿真发射装置内弹道中的应用

介绍了动网格的更新方法,并且结合湍流模型、汽化模型在fluent平台上对内弹道进行仿真。仿真结果表明,导弹出筒速度与实际试验结果吻合程度相当好,误差在1%以内,仿真方法对实际工程有重要的指导意义。     

贝叶斯网络下考虑攻击企图的目标威胁评估

为解决舰艇编队的防空目标威胁评估问题,针对现有威胁评估方法中忽略目标攻击企图,且只进行静态评估而未考虑目标机动导致的运动参数变化对威胁评估的影响之不足,提出了利用目标攻击时所表现出来的特征参数进行攻击企图估计,并分析了影响机动目标威胁程度的相关参数和变量,以目标信息更新周期为不同时间片,建立了用于动态评估目标威胁度的离散模糊动态贝叶斯网络结构模型。为适应编队防空中火力通道多、目标批次多的特点,将一般威胁等级从3级划分扩展为5级划分。给出了网络中主要节点的状态转移概率表和条件概率表。通过对机动目标按照典型攻击航路的威胁度变化仿真表明,所建立的模型和采用的方法合理有效,能够较为准确地反映目标威胁,贴近实战。     

气液同轴式喷嘴雾化特性的试验

通过试验研究气液同轴直流式和气液同轴离心式喷嘴的雾化性能。研究表明:喷嘴出口扩张时可以改善喷嘴的雾化性能;气液同轴直流式和气液同轴离心式喷嘴都存在一个合适的缩进长度,在改善喷嘴雾化特性的同时对总流量影响较小;在相同条件下,气液同轴离心式喷嘴的喷雾性能要优于气液同轴直流式喷嘴的喷雾性能。     

轮胎侧偏特性对汽车前轮角阶跃输入瞬态响应影响的研究

为了分析轮胎侧偏刚度对汽车前轮角阶跃输入下车身横摆角速度瞬态响应的影响,建立汽车运动的二自由度平面模型,解析分析了轮胎侧偏刚度对瞬态响应的影响。利用在ADAMD/Car中建立的整车模型进行仿真试验验证,解析分析结果与虚拟试验基本相符,得出适度增大后轮侧偏刚度,有利于提高汽车转向时的操纵稳定性的结论。     

非线性隔冲系统最大响应的计算方法

提出了一种计算具有三次方非线性刚度的单自由度隔冲系统最大响应的方法 ,该方法将计算过程分成冲击作用阶段和自由衰减振动阶段 .在冲击作用阶段中 ,认为系统的冲击刚度为常数 ;在自由衰减振动阶段中 ,考虑系统的刚度非线性 ,用迭代法推导出了系统最大位移和最大加速度的一阶近似表达式 .据此可用数值计算的方法求出系统的最大位移和最大加速度     

冲激雷达抗 RAM能力的实验研究

本文用实验方法从频域和时域两个方面研究了涂覆吸波材料目标的电磁散射,结果表明超宽带信号比常规雷达的窄带信号对付涂覆吸波材料目标有10～12dB好处,说明超宽带信号的确具有抗窄带吸波材料的良好能力。     

变增益模糊控制器

本文导出了选择比例因子的定量约束条件。以此约束条件为基础,论述了选择比例因子时存在的难以同时兼顾控制系统动态和稳态性能的问题。提出用变增益的方法实现模糊控制。数字仿真结果表明,该方法比通常的固定增益模糊控制具有动态特性好,稳态误差小,以及对被控对象参数变化适应性强等优点。