On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于VFGPIR联合特征的决策级加权融合检测方法

车载前视地表成像雷达(VFGPIR)探测浅埋目标时面临虚警率过高问题,可利用序列图像特征的联合检测解决这一问题.首先利用Fisher鉴别比(FDR)定量评估从单帧和序列图像中提取的单个特征的鉴别能力;然后针对单个最优序列特征无法满足探测指标要求提出一种基于决策级加权融合的多特征联合检测方法;最后利用接收机工作特性(ROC)曲线来验证所提方法的有效性.试验结果表明:序列特征比单帧图像特征具有更好的鉴别能力;所提方法性能优于单个最优序列特征、特征向量和多数票融合准则对应的检测结果,有望满足实际探雷应用需求.     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

高超声速变形飞行器翼面变形模式分析

为提高高超声速翼身组合式飞行器的射程,研究了采用不同翼面变形模式时,飞行器在马赫数3~8内的气动特性和翼面效率。针对典型的轴对称翼身组合式外形,采用Navier-Stokes方程进行数值模拟,对伸缩、变后掠和二维折叠三种变形模式下的外形在超声速及高超声速来流条件下进行模拟,并对升阻比、翼面单位面积升阻比和操稳特性进行分析。结果表明:在超声速及高超声速范围内,变后掠变形模式在宽速域内升阻比提高明显,同时具备优良的翼面效率及操稳特性,其在马赫数3~8范围内具有最优的综合性能。研究成果能对高超声速翼身组合式变形飞行器布局设计提供参考,具有一定的指导意义。     

利用复单脉冲比的平面阵列雷达群目标检测方法

针对平面阵列雷达群目标检测问题,以矩形阵为例,详细分析方位向和俯仰向复单脉冲比虚部的统计特性;建立平面阵列雷达群目标检测模型,根据恒虚警检测原理推导复单脉冲比虚部的椭圆判决域,并利用复单脉冲比实部辅助判决,综合提出基于复单脉冲比的平面阵列雷达群目标检测算法。针对双目标情形进行仿真实验,结果表明:在较高信噪比、较大角度间隔以及幅度相当且相位差较大的条件下算法能够有效检测群目标。     

高超声速飞行器前体外形设计与气动特性分析

利用数值计算开展了高超声速飞行器前体气动特性的考察,重点研究了三维效应对于前体流场及预压缩性能的影响,提出了抑制三维侧缘溢流影响、改善三维前体气动性能的前体侧缘设计思想,考察了侧缘外形的容积效率,提出了有效容积效率的概念和评估方法,对于不同侧缘形式的前体构型进行了气动特性的考察,给出了不同前体构型气动特征的变化规律。     

一种简易高效的加速措施——移位常数

本文介绍在不增加硬件额外开销的情况下,提高巨型机“取操作数”速度的一种基于直接数指令的移位常数方法。     

二阶阶跃模型下导航信号畸变对接收机载噪比估计影响分析

载噪比作为评估导航信号质量的重要指标,直接影响着接收机的捕获、跟踪和电文解调性能。推导了基于国际民航组织二阶阶跃信号畸变模型下导航接收机采用相关、非相关处理时载噪比估计与畸变模型参数之间的解析表达式,并分析了畸变参数对导航接收机载噪比估计误差的影响。理论分析及仿真结果表明:数字畸变参数变化范围下导航信号载噪比变化在10-2量级,增大模拟畸变的振荡频率或者减小衰减频率将会提高载噪比估计值,模拟畸变参数变化引起的载噪比损耗可达0.1d BHz,畸变参数对载噪比估计的影响整体上都较小,因此导航接收机的载噪比输出不能作为监测导航信号是否异常的完备检测量。     

发射波束域MIMO-STAP雷达发射接收联合设计方法

研究了信号相关杂波背景下机载多输入多输出(multiple-input multiple-output,MIMO)雷达发射波束形成和接收滤波器的联合设计问题,建立了机载MIMO雷达发射波束域空时自适应处理(space-time adaptive processing, STAP)信号模型。为了提升杂波环境下目标的检测性能,通过最大化输出信干噪比构建了发射波束形成和接收滤波器的联合设计问题;然后,设计了一种新的基于优化最小化(majorization-minimization,MM)框架的迭代优化算法来解决联合设计问题。该算法通过合理寻找目标函数的下界可以有效提升算法的收敛速度并降低算法的运行时间。此外,与传统的相控阵雷达和MIMO雷达相比,优化后的发射波束形成和接收滤波器可以显著提升输出信干噪比,仿真实验验证了所提方法的有效性。     

跨音速流动中涡轮动叶叶顶的气膜冷却特性分析

为了掌握跨音速流动中涡轮动叶叶顶气膜冷却特性,采用压敏漆测试技术来研究叶顶间隙高度和质量流量比对叶顶气膜冷却特性的影响规律。研究结果表明:在小质量流量比条件下,增加叶顶间隙高度能够有效改善叶顶中弦区域的气膜覆盖,然而当质量流量较大时,叶顶间隙高度变化对叶顶中弦区域的气膜冷却效率分布影响并不明显;在小叶顶间隙高度条件下,随着质量流量比增加,叶顶中弦区域冷气覆盖效果逐渐变差,在大叶顶间隙高度条件下,仅当质量流量比从0.1%+0.05%增加到0.14%+0.07%时,叶顶中弦区域的冷气覆盖效果才有所改善。