Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.     

Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact

In this study, the anti-penetration performance of polyurea/ASTM1405-steel composite plate subjected to high velocity projectile was analyzed. Two kinds of modified polyurea material (AMMT-053 and AMMT-055) were selected and a ballistic impact testing system including speed measuring target system and high-speed camera was designed. This experiment was conducted with a rifle and 5.8 mm projectile to explore the effects by the polyurea coating thickness, the polyurea coating position and the glass-fiber cloth on the anti-penetration performance of polyurea/ASTM1405-steel composite plate. The result showed that the effects of polyurea coating position were different between two types of polyurea, and that the effects of glass-fiber position were disparate between two types of polyurea as well. For AMMT-053 polyurea material, it was better to be on front face than on rear face; whereas for AMMT-055 pol-yurea, it was better to be on rear surface although the difference was very subtle. Additionally, formulas had been given to describe the relationship between the effectiveness of polyurea and the thickness of polyurea coating. In general, AMMT-055 had better anti-penetration performance than AMMT-053. Furthermore, five typical damage modes including self-healing, crack, local bulge, spallation and local fragmentation were defined and the failure mechanism was analyzed with the results of SHPB test. Additionally, the bonding strength played an important role in the anti-penetration performance of polyurea/steel composite plate.     

基于HLA的弹道导弹突防仿真系统开发研究

随着反导防御系统的发展,弹道导弹突防将受到更大的威胁。HLA以其可重用性、互操作性好的特点,逐渐成为仿真的主流体系结构。介绍了HLA的系统组成和联邦开发的过程,提出了一个基于HLA的弹道导弹突防仿真系统仿真框架,为后续的仿真系统开发奠定了必要的基础。     

Ablation characteristics of insulator under high-temperature gas dual-pulse erosion

This study numerically simulated and investigated the flow field characteristics of a typical dual-pulse solid rocket motor with a soft pulse separation device through thermal insulation ablation under high-temperature dual-pulse erosion. The ablation rate of ethylene -propylene-diene monomer (EPDM) insulator was measured after the experiment. Experimental results were analyzed through scanning electron microscopy and microcomputed tomography. The ablation mechanism of the EPDM insulator under the operation conditions of a dual-pulse solid rocket motor was evaluated by analyzing the results. The results reveal that the internal flow field of the motor with a soft pulse separation device is uniform. The original charred layer existing on the EPDM insulator surface in the first pulse combustor is the decisive factor affecting the final ablation rate of the dual-pulse motor during the second pulse operation, and the ablation characteristic region is easily formed with the exfoliation of the charred layer. The ablation rate difference of the insulator increases with gas velocity.     

CONFLICT RESOLUTION PROCESSES,UNCERTAINTY AND INVESTMENT DYNAMICS: EVIDENCE FOR THE BASQUE COUNTRY

The Junior Reserve Officers’ Training Corps is a high school program that combines classroom teaching with extracurricular activities. The program is located primarily in inner city schools and serves at‐risk students. Its goals are multidimensional and include military preparation and improving academic achievement. Using High School and Beyond data we find that the program’s effects depend on the timing and intensity of involvement. Test scores, graduation rates, and enlistments are higher for students who participate early in high school and for those who persist in the program. Conversely, we find few effects for students participating in the last two years of high school.     

基于鲁棒高阶容积滤波的无人机相对导航状态估计方法

由于无人机相对导航系统具有非线性强、噪声非高斯的特点,传统的基于卡尔曼滤波算法设计的相对导航滤波器存在估计失准甚至发散的问题。考虑到高阶容积卡尔曼滤波和最大熵滤波算法分别在解决非线性问题和非高斯问题时的优势,利用最大熵滤波的量测更新方法对高阶容积卡尔曼滤波的测量更新方程进行了改进,将传统的量测更新问题转换成了线性衰退的求解问题,避免了对测量噪声进行高斯假设,同时解决了系统非线性和量测噪声非高斯的问题。进行了相应的数学仿真,仿真结果表明:所提算法的估计精度超过了高阶容积卡尔曼滤波和最大熵滤波算法的,验证了算法的有效性。     

基于HLA/RTI 的仿真系统设计

结合雷达电子对抗仿真实例，论述了基于ＨＬＡ／ＲＴＩ的分布交互式多机仿真系统的体系结构、底层通信网络、运行支持系统、仿真应用对象模型和仿真运行管理及其设计与实现问题。     

程控大功率直流稳压电源的研制

程控大功率直流稳压电源是某型鱼雷自动检测系统的分系统,是为实现鱼雷全自动化供电和测试的一种先进设备。该系统采用了ＭＣＳ－５１单片机实施系统控制与管理、电压连续调整、通讯程控等功能,因而精度高、自动化功能强、使用方便。     

柴油机检测与诊断系统的研制

本文以作者参加研制的柴油机检测与诊断系统为对象,在分析柴油机故障机理及特点的基础上,详细论述了检测与诊断系统的组织与结构,检测参数的选择与取舍,信号数据的采集与处理和系统故障诊断等方面的问题。文章着重论述了转速的测量及其在柴油机检测与诊断系统中的应用,柴油机高压油路的检测与诊断,ＤＳＰ系统软件的开发及其在柴油机表面振动诊断中的应用。     

管道中高次波的有源控制

探讨管道中高次波的有源控制问题.首先,对消声条件下的次级声源强度进行了理论分析,并对误差传声器的数目与位置进行了讨论.最后,进行了控制方截面管中(0,0)次波(平面波)和(1,0)次波的实验.结果表明,对管道中的高次波实施有源控制是完全可能的.