基于直接算法的合成孔径雷达干涉测量几何精度分析

直接将绝对相位差引入距离方程和多普勒方程答解地面点坐标,称为合成孔径雷达干涉测量直接算法。利用引入含有合理误差的模拟InSAR像坐标、绝对相位差和相应的轨道参数作为起算数据,求得含有误差的地面点坐标,实现了InSAR直接算法的几何精度分析。为了把基线长度和姿态的误差引入轨道空间位置,提出了相应的数学模型。计算结果表明,直接算法与经典算法精度基本相同。     

应用SoC实现装备维修改造的研究

片上系统(SoC)技术是近年来随着微电子技术发展出现的新技术,现已被广泛应用.利用SoC可以将原来由许多芯片完成的复杂功能,集中到一块芯片中完成,以获得更高的系统性能.以某火控系统中的模拟量输入通道为例,阐述了通过SoC技术,用基于FPGA/CPLD的方法对火控系统硬件电路进行维修改造,从而探讨了解决装备维修问题的一种方法.并讨论了改造过程中单稳态触发器96L02的替代问题,以及FPGA/CPLD与外围电路的驱动能力问题.     

改善逆变器输出电压波形的研究

在115 V/400Hz逆变电源中,A/D转换器引起的量化误差对系统的影响是造成系统不稳定的主要因素之一.通过对逆变器反馈通道误差的分析,采用全波整流电路对115 V/400 Hz逆变电源中A/D采样电路进行了改进,减小反馈通道误差,使逆变器的稳态电压输出波形质量得到显著改善.     

GPS/INS复合制导技术

近年来随着制导技术的发展,国外许多新型的武器装备都采用了GPS/INS复合制导技术。介绍了国外GPS/INS复合制导技术的发展和应用,重点分析了惯性导航系统和全球定位系统的优缺点,综述了GPS/INS复合制导的工作原理和关键技术。文中列举了美国GPS/INS系统的小型化,以及GPS/INS复合制导系统在SM-3导弹、洲际导弹等多种导弹制导过程中发挥的作用。由此可见,掌握国外复合制导体系的发展动态对我国GPS/INS复合制导技术的发展将起到重要的借鉴和启示作用。     

PS／2键盘接口在单片机中的应用研究

PS/2键盘接口由于采用标准PS/2协议通信,易于控制,在嵌入式系统中有良好的应用前景.针对如何使用这种接口,介绍了其物理接口及通信协议,重点对工作时序和部分命令字进行了说明.在应用中,给出了PS/2键盘与单片机的接口电路及通信方案,并提供相应的接口通信程序.     

加强三维制图教学 促进部队装备建设

为了提高武警部队装备研发的设计速度与水平,从满足部队装备建设的实际需要出发,阐述了军事装备学科的发展思路与方向。结合部队装备仿真设计和创新研制实例,简述了实体参数化设计软件Pro／Engineer的功能特点,阐明了加强三维制图教学的必要性及其在部队装备建设中的重要作用,以及不同学历层次Pro／Engineer的教学内容。对促进军事装备学本科与研究生教育,提高部队装备的开发建设水平具有意义。     

光电坐标传感器在光幕靶中的应用

针对光电报靶系统的标校问题,以及可见光光幕靶光电接收器检测灵敏度的一致性和与海量数据的高速采集问题,采用大发射角的LED发光管,设计了光电开关电路和高速采样保持电路,实现了基于光电开关和取样电阻网络的光电坐标传感器,提高了系统的检测灵敏度和一致性,降低了系统设计的难度和成本。试验证明：该方法精度较高,具有良好的应用前景。     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

Fullerene bisadduct stabilizers: The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose (NC)/nitroglycerine (NG), we synthesized N-(4-methoxy) phenylpyrrolidine-C₆₀ and four different of bis(N-(4-methoxy) phenylpyrrolidine)-C₆₀ compounds through Prato reaction. Their structures were characterized by UV–vis, ¹H NMR, ¹³C NMR, high-resolution mass spectroscopy, and single-crystal X-ray diffraction. Their stabilization effect to NC/NG were investigated using differential scanning calorimetry, methyl violet, vacuum stabilization effect, weight loss, and accelerating rate calorimeter tests. The results indicated these compounds had excellent stabilization effect to NC/NG. The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C₆₀. Moreover, the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different, and its stabilization effect to NC is also different. The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows: e-edge > trans-2> cis-2> trans-3. Electron paramagnetic resonance (EPR) and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG. The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide, and their ability is better than that of the monoadduct and C₆₀, which is consistent with the results of stabilization effect performance test.