数值模拟气/气喷嘴速度比对燃烧性能的影响

为研究应用于全流量补燃循环发动机的不同气/气喷嘴得到的燃烧流场,通过求解NavierStokes方程组,对不同燃料与氧化剂速度比下的流动燃烧过程进行了数值计算,计算结果与实验结果吻合。仿真结果表明:增加速度比能使燃烧火焰面提前,燃烧效率变大。如果发动机的长度受到限制,可以适当增加速度比以实现高效燃烧。     

姿态角单次调整的固体运载火箭耗尽关机能量管理方法

固体运载火箭传统耗尽关机制导方法姿态角调整次数过多,不利于控制系统设计。提出了姿态角单次调整的耗尽关机能量管理策略:以火箭的待增视速度方向为基准,通过计算火箭所需耗费的视速度,优化选取火箭的初、末姿态角;火箭以恒定角速率从初姿态角变为末姿态角,达到末姿态角时保持恒定,直至耗尽关机。仿真结果表明,新方法在满足火箭的终端速度约束条件下,视速度模量耗费百分比超过30%,且姿态角单向调整,有利于控制系统的工程设计。     

多点偏心起爆对破片速度增益的影响

多点偏心起爆后,爆轰波相互作用在定向区域内产生了马赫波超压,使得该区域破片速度产生增益.利用爆轰波反射理论,建立多点偏心起爆后爆轰波相互作用特性的理论模型,并确定定向区内破片速度的增益特性.3种不同起爆方式的仿真计算和静爆试验结果对比表明,定向区内不同起爆方式得到的破片增益程度较为吻合.     

一种改进的变异粒子群算法研究

粒子群优化算法PSO(Partic le Swarm Optim ization)是一类性能优越的寻优算法。但由于早熟问题,影响了算法性能的发挥。针对这一问题,引入粒子距离的概念,提出一种新的PSO改进方法(称为NA-PSO)。通过求解组网雷达的系统偏差,表明了NA-PSO算法的可行性,与对比方法相比较,能有效配准,且具有更好的收敛精度和更快的进化速度。     

Low velocity impact studies of E-glass/epoxy composite laminates at different thicknesses and temperatures

Low velocity impact experiments were carried out on E-glass/epoxy composite laminates having varying thicknesses at sub zero and elevated temperatures using hemi spherical steel impactor of 16 mm diameter with impact energies in the rage of 50–150 J. The performance of the laminates was assessed in terms of energy absorption, maximum displacement, peak force and failure behaviour. Results indicated that the effect of temperature on energy absorption of the laminate is negligible although the laminates are embrittling at sub zero temperatures. However it has influence on failure behaviour and displacement. Peak force has increased linearly with increase in laminate thickness from 5 to 10 mm. However it got reduced by 25% when temperature was increased from −20 °C to 100 °C. Based on experimental results, laminate perforation energies were predicted using curve fitting equations. Statistical analysis was carried out using Taguchi method to identify the global effects of various parameters on laminate performance and confirmed that the laminate thickness has significant influence as compared to temperature, for the studied range.     

Preparation and property of CL-20/BAMO-THF energetic nanocomposites

A sol-gel freezing-drying method was utilized to prepare energetic nanocomposites based on 2, 4, 6, 8, 10, 12-hexanitro-2, 4, 6, 8, 10, 12-hexaazaisowurtzitane (CL-20) with 3, 3-Bis (azidomethyl) oxetane-tetrahydrofuran copolymer (BAMO-THF) as energetic gel matrix. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, Fourier-transform infrared spectroscopy (FT-IR) and differential thermal analyser (DTA) were utilized to characterize the structure and property of the resultant energetic nanocomposites. Compared with raw CL-20, the average particle sizes of CL-20 in CL-20/BAMO-THF energetic nanocomposites were decreased to nano scale and the morphologies of CL-20 were also changed from prismatic to spherical. FT-IR detection revealed that CL-20 particles were recrystallized in BAMO-THF gel matrix during the freezing-drying process. The thermal decomposition behaviors of the energetic nanocomposites were investigated as well. The thermolysis process of CL-20/BAMO-THF nanocomposites was enhanced and the activation energy was lower compared with that of raw CL-20, indicating that CL-20/BAMO-THF nanocomposites showed high thermolysis activity. The impact sensitivity tests indicated that CL-20/BAMO-THF energetic nanocomposites presented low sensitivity performance.     

Ballistic impact properties of woven bamboo- woven E-glass- unsaturated polyester hybrid composites

In this study, a laminated woven bamboo/woven E glass/unsaturated polyester composite is developed to combat a ballistic impact from bullet under shooting test. The aim of this study is to understand the fundamental effects of the woven bamboo arrangement towards increasing ballistic resistance properties. The work focusses on the ballistic limit test known as NIJ V50, which qualifies materials to be registered for use in combat armor panels. The results show that the composites withstood 482.5 m/s ± 5 limit of bullet velocity, satisfying the NIJ test at level II. The findings give a strong sound basis decision to engineers whether or not green composites are qualified to replace synthetic composites in certain engineering applications.     

电弧喷涂技术在防腐工程中的应用及进展

介绍了电弧喷涂技术的原理、特点及进展,特别是电弧喷涂技术在防腐工程领域的应用指出电弧喷涂技术,特别是高速电弧喷涂技术是21世纪表面工程中的重点发展方向。     

惯性调速器的新作图法

本文针对现有惯性调速器作图法的缺点,给出了一种比较简单、直观且具有明显物理意义的作图方法.此法具有自检作图精确性的特点.