考虑扩散效应圆形隧洞热弹性耦合动力响应研究

利用S-H热弹性扩散的基本理论,研究了无限弹性介质中圆形隧洞表面受随时间变化的热冲击的动力响应问题.采用直接求解方法以避免势函数的引入,利用Laplace变换技术,求解热、力、化学耦合控制方程,获得了弹性介质中温度梯度、位移、应力和化学势的积分形式解.最后,利用Laplace逆变换得到数值结果,分析了热、力、化学耦合条件下弹性介质中温度梯度、应力、位移和化学势响应的分布规律.     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

布尔函数的Walsh谱绝对值分布及其性质研究

提出并研究了布尔函数的Walsh谱绝对值分布.指出布尔函数Walsh谱绝对值分布在仿射变换下的不变性,计算了n(n≤5)元布尔函数的Walsh谱绝对值分布,研究了Walsh谱绝对值分布与Walsh谱支撑和Walsh谱中非零取值个数以及其他一些密码学难题的联系,最后研究了布尔函数的Walsh谱绝对值分布的大小.     

海面空-空无线信道特征

针对海上远距通信场景,基于无人机之间的无线通信链路,对接收功率进行实际测量。在大尺度路径损耗方面,采用对数距离线性模型进行拟合,分析海上远距空-空无线信道特征,获取路径损耗指数,并采用射线跟踪方法进行仿真验证,通过仿真所得信道冲激响应在多径时延和功率方面分析产生接收功率快速变化的原因。分析结果表明,近岸的多径反射会造成接收功率的波动,并且会造成路径损耗的升高。利用三种分布函数对测量数据进行分布拟合,分析海面和近岸两种通信条件下空-空无线信道的小尺度分布特征。测量分析结果表明,小尺度特征受陆地反射影响明显,在距离陆地较远的海面呈现高斯分布特征,而在近陆地处未呈现典型分布特征。     

基于改进遗传算法的防空火力优化分配方法

结合地空导弹部队防空作战的特点,提出了基于改进遗传算法的防空火力优化分配模型,给出了模型求解的方法和步骤,详细阐述了改进遗传算法在防空火力分配中的应用,通过在计算机上仿真运行实例得出了火力分配方案,通过仿真证明本方法运算速度较快,结果精度较高,对地面防空火力分配决策研究具有一定的参考价值。     

The NBUL class of life distribution and replacement policy comparisons

Let X and X_τ denote the lifetime and the residual life at age τ of a system, respectively. X is said to be a NBUL random variable if X_τ is smaller than X in Laplace order, i.e., X_τ ≤_L X. We obtain some characterizations for this class of life distribution by means of the lifetime of a series system and the residual life at random time. We also discuss preservation properties for this class of life distribution under shock models. Finally, under the assumption that the lifetimes have the NBUL property, we make stochastic comparisons between some basic replacement policies. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 578–591, 2001.     

舰船装备随行备件量需求规律分析

通过对舰船装备备件需求影响因素的分析 ,从理论上推导了备件需求的分布规律 ,在此基础上建立了舰船级备件典型需求模型 ,并且对典型的故障分布模型进行了推广     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

Applying a bootstrap approach for setting reorder points in military supply systems

This paper develops and applies a nonparametric bootstrap methodology for setting inventory reorder points and a simple inequality for identifying existing reorder points that are unreasonably high. We demonstrate that an empirically based bootstrap method is both feasible and calculable for large inventories by applying it to the 1st Marine Expeditionary Force General Account, an inventory consisting of $20–30 million of stock for 10–20,000 different types of items. Further, we show that the bootstrap methodology works significantly better than the existing methodology based on mean days of supply. In fact, we demonstrate performance equivalent to the existing system with a reduced inventory at one‐half to one‐third the cost; conversely, we demonstrate significant improvement in fill rates and other inventory performance measures for an inventory of the same cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 459–478, 2000     

An optimal recursive method for various inventory replenishment models with increasing demand and shortages

We establish various inventory replenishment policies to solve the problem of determining the timing and number of replenishments. We then analytically compare various models, and identify the best alternative among them based on minimizing total relevant costs. Furthermore, we propose a simple and computationally efficient optimal method in a recursive fashion, and provide two examples for illustration. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 791–806, 1997