引信全电子安全系统失效分析及评估

本文根据全电子安全系统的一般结构模式,分析了其安全性设计的一般特点和可能造成其失效的各种原因,并在此基础上建立了全电子安全系统的失效故障树,给出了失效概率的定量计算结果。     

有限宽板应力强度因子的一种近似解法

本文对文献[1]中提出的近似方法,在运用于不同问题之后.发现了该方法的局限性,并提出了改进的措施,取得了明显的效果.     

一类扩散过程的最优停止

金融数学中关于美式期权的定价理论最后归结为一个对扩散过程的最优停止问题,扩散过程是特殊的马氏过程,本文讨论了当报酬函数非负时的值函数性质及其最优停时的表示。特别对带折扣的报酬的讨论,更加符合金融数学的需要     

Dynamic server assignment policies for assembly‐type queues with flexible servers

We seek dynamic server assignment policies in finite‐capacity queueing systems with flexible and collaborative servers, which involve an assembly and/or a disassembly operation. The objective is to maximize the steady‐state throughput. We completely characterize the optimal policy for a Markovian system with two servers, two feeder stations, and instantaneous assembly and disassembly operations. This optimal policy allocates one server per station unless one of the stations is blocked, in which case both servers work at the unblocked station. For Markovian systems with three stations and instantaneous assembly and/or disassembly operations, we consider similar policies that move a server away from his/her “primary” station only when that station is blocked or starving. We determine the optimal assignment of each server whose primary station is blocked or starving in systems with three stations and zero buffers, by formulating the problem as a Markov decision process. Using this optimal assignment, we develop heuristic policies for systems with three or more stations and positive buffers, and show by means of a numerical study that these policies provide near‐optimal throughput. Furthermore, our numerical study shows that these policies developed for assembly‐type systems also work well in tandem systems. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

尾座式电动飞机复合材料机翼结构优化设计

以复杂地形地区物资快速投送平台设计为背景,开展尾座式电动飞机复合材料机翼设计研究。对机翼结构载荷进行分析,对机翼结构构件布置和铺层进行设计,形成复合材料机翼结构设计方案。建立复合材料机翼结构有限元模型,开展典型工况条件下的静力分析,得到机翼结构变形、应力和Tsai-Wu失效因子分布。采用分步优化策略,以机翼结构铺层厚度和铺层角度为设计变量,开展机翼结构质量优化计算,优化结果表明,优化后的机翼结构在满足强度和刚度要求下质量减轻约47.77%,可为尾座式电动飞机结构设计提供重要参考。     

姿控发动机脉冲工作的管路瞬变特性

采用有限差分格式的特征线方法 ,对某姿控推进系统发动机真实推进剂管路在脉冲工作情况下的瞬变特性进行了数值研究 ,对影响发动机多次脉冲启动的重要参数进行了定量计算 ,对比分析了试验结果与计算结果的一致性。说明该方法可方便地对包括许多管路、阀门和推力室的复杂系统进行动态性能分析 ,所得结果对于液体火箭发动机管路工程设计具有重要参考价值     

面向GPU的非结构网格有限体积计算流体力学的图染色方法优化

采用图染色方法解决通量累加和局部最大压力计算引起的两种典型资源竞争问题,并通过共享内存的使用、体编号和面编号的重排、面数据的重排三种策略优化图染色方法。针对应用在空气动力学多种规模的三维网格,分别采用双精度和单精度操作数,在Nvidia Tesla V100和K80 GPU上,展开性能测试。结果表明:共享内存的优化效果不明显;体编号和面编号重排降低了图染色方法的计算性能;面数据重排可以有效地优化图染色方法;计算性能在V100上提高20%左右,在K80上提高15%左右。     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.