美国非法证据排除规则与德国证据运用禁止规则之比较

非法获得的证据能否作为定案的依据 ,历来为各国刑事证据理论所关注。美国和德国作为英美法系和大陆法系的典型代表 ,分别确立了非法证据排除规则和证据运用禁止规则。研究了两国排除规则的内涵、发展历史、适用范围及存在差异     

基于BP神经网络的复杂电子设备实时故障诊断专家系统

以某型通信设备为例,介绍了如何将BP神经网络和传统的专家系统结合在一起,构成实时的故障诊断系统,从而避免传统的专家系统存在的一些问题,更好地解决故障诊断的问题.     

基于功能树的导弹打击系统目标瞄准点选择方法

针对导弹打击系统目标的问题,建立了基于目标功能损伤度的瞄准点选择方法;在对毁伤树方法进行改进的基础上,提出了描述目标结构与工作流程的目标功能树模型,构造出体现目标整体功能下降的优化目标函数,采用模拟退火算法搜索最优解。通过算例对不同的瞄准点选择方案进行比较,发现考虑目标的功能结构特点时,得到的瞄准点明显优于其它方案。     

基于排放和模糊神经网络模型的柴油机故障诊断方法

根据排放检测数据规律,定义并提取特征参数,建立了规则与模糊神经网络有机结合的柴油机故障诊断模型及其对应的特征知识库,确立了模型的“可塑性”学习路线,并以单缸失火故障为例,进行了模型诊断实例研究。结果表明：运用该方法进行柴油机的故障诊断,结果准确,识别速度快,诊断效率高。     

数据挖掘故障诊断专家系统

为了及时准确地对防空导弹飞行试验故障进行诊断,克服传统专家系统获取专家知识的瓶颈,立足于防空导弹飞行试验历史数据,利用数据挖掘的方法获得飞行试验故障模式判定决策树,进而得出导弹故障判定规则,形成故障诊断专家知识库,构建防空导弹故障诊断专家系统.这使数据挖掘和专家系统两者的优点得到充分发挥.     

Real-time prediction of projectile penetration to laminates by training machine learning models withfinite element solver as the trainer

Studies on ballistic penetration to laminates is complicated, but important for design effective protection of structures. Experimental means of study is expensive and can often be dangerous. Numerical simu-lation has been an excellent supplement, but the computation is time-consuming. Main aim of this thesis was to develop and test an effective tool for real-time prediction of projectile penetrations to laminates by training a neural network and a decision tree regression model. A large number of finite element models were developed;the residual velocities of projectiles fromfinite element simulations were used as the target data and processed to produce sufficient number of training samples. Study focused on steel 4340tpolyurea laminates with various configurations. Four different 3D shapes of the projectiles were modeled and used in the training. The trained neural network and decision tree model was tested using independently generated test samples using finite element models. The predicted projectile velocity values using the trained machine learning models are then compared with thefinite element simulation to verify the effectiveness of the models. Additionally, both models were trained using a published experimental data of projectile impacts to predict residual velocity of projectiles for the unseen samples. Performance of both the models was evaluated and compared. Models trained with Finite element simulation data samples were found capable to give more accurate predication, compared to the models trained with experimental data, becausefinite element modeling can generate much larger training set, and thus finite element solvers can serve as an excellent teacher. This study also showed that neural network model performs better with small experimental dataset compared to decision tree regression model.     

基于时域平均的齿轮故障诊断

提出了信号时域平均处理的新算法,解决了周期截断误差对平均结果的影响,并对测取的齿轮箱齿轮故障振动信号进行了处理。实验结果表明:该方法在齿轮故障信号的处理中能够消除背景噪声的影响,取得比较理想的效果。     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

一种针对HIGHT的改进差分故障的分析

为评估HIGHT轻型分组密码抗故障攻击能力,基于单字节故障模型,提出一种改进的HIGHT故障攻击方法．首先在HIGHT最后1轮注入单字节故障恢复SK124和SK1262个轮密钥,然后增加故障注入深度,在HIGHT倒数第5轮注入单字节故障恢复HIGHT另外10个轮密钥,从而恢复HIGHT的全部主密钥．实验结果表明：仅需22次故障注入即可恢复HIGHT全部128位主密钥,优于现有故障攻击方法所需的32次故障注入．     

基于面向对象技术的柴油机在线状态监测系统设计

将软件设计中的面向对象思想扩展到系统设计中,针对柴油机实车运行在线监测中的变速变载及空间有限等问题,基于CAN总线的可靠性、信息传输的实时性和多主工作方式,设计分布式智能监测节点和上位机监控中心．分布式监测节点同步采集柴油机运行数据并进行降噪和简单特征提取后,将实时采样数据和在线监测结果上传至基于嵌入式PCI04的上位机监控中心,进行二次特征提取和智能模式识别,从而实现柴油机在线状态监测与故障预警和诊断．