重力分离SHS陶瓷内衬复合管后期处理组织研究

研究了重力分离SHS法制备的陶瓷内衬复合管,在还原气氛下进行高温处理过程前后,复合管中陶瓷与钢管间的过渡层组织形态、组织分布的变化和过渡层中的裂纹的变化情况。指出:随着加热温度的升高、保温时间的延长,原子扩散能力加强,在过渡层界面上,以及陶瓷和钢管中出现新的化合相,能增强复合管的结合强度和力学性能,降低陶瓷的脆性。后期高温处理中,加热温度过高、保温时间过长,会造成组织粗化等缺陷,导致复合管性能变差。     

同轴离心式喷嘴两相喷雾浓度场理论计算模型

提出了模拟两相喷雾流场的液滴湍流弥散过程的模型。该模型采用了轨道扩散模型的基本思想,把液雾尺寸分布按液滴直径分成有限尺寸组,每组液滴都追随各自的平均轨道。计算平均轨道时每组液滴就像一个液滴的行为。与随机轨道模型不同的是本模型考虑同一组内的液滴在流场中的湍流扩散,认为每一液滴尺寸组中的液滴以其平均轨道为中心有一个高斯分布。     

Data-driven prediction of plate velocities and plate deformation of explosive reactive armor

Explosive reactive armor (ERA) is currently being actively developed as a protective system for mobile devices against ballistic threats such as kinetic energy penetrators and shaped-charge jets. Considering mobility, the aim is to design a protection system with a minimal amount of required mass. The efficiency of an ERA is sensitive to the impact position and the timing of the detonation. Therefore, different designs have to be tested for several impact scenarios to identify the best design. Since analytical models are not predicting the behavior of the ERA accurately enough and experiments, as well as numerical simulations, are too time-consuming, a data-driven model to estimate the displacements and deformation of plates of an ERA system is proposed here. The ground truth for the artificial neural network (ANN) is numerical simulation results that are validated with experiments. The ANN approximates the plate positions for different materials, plate sizes, and detonation point positions with sufficient accuracy in real-time. In a future investigation, the results from the model can be used to estimate the interaction of the ERA with a given threat. Then, a measure for the effectiveness of an ERA can be calculated. Finally, an optimal ERA can be designed and analyzed for any possible impact scenario in negligible time.     

压力喷嘴常温下雾化特性实验研究

为了满足工程中对喷嘴雾化特性测量的高精度、低成本要求,建立了喷嘴雾化特性实验系统,以自来水为雾化工质,对蒸发冷却压力喷嘴在常温、常压下的雾化特性进行了实验研究。用容积法测量了喷嘴的流量,用最小二乘法对测量数据进行回归分析,得到了喷嘴流量、雾化压力和喷孔直径之间的关联式与流量系数;用机器视觉方法测量了喷嘴的雾化锥角与雾滴尺寸,得到了雾化锥角与雾滴尺寸随雾化压力变化的规律。结果表明:随着雾化压力的增大,喷嘴雾化锥角不断增加,雾滴尺寸不断减小;随轴向距离的增大,D0.632、D0.5、D32有不同幅度的增大,而D0.9则基本不变。     

一种基于离心雾化的新型热喷涂技术

研究开发了一种新型的热喷涂技术——离心雾化转移弧等离子喷涂技术(CAPTAS),阐述了该技术工作原理、设备以及熔融粒子的离心雾化机理。观察了采用该技术所制备的涂层微观组织结构,通过能谱仪对该涂层的成分进行了分析, 并与传统的电弧喷涂涂层进行了比较。结果表明,采用CAPTAS技术制备的涂层具有和传统电弧喷涂涂层类似的扁平化层状结构,但粒子大、变形小、氧化物含量低。     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.     

隧道火灾快速补救方法研究

通过对多个隧道火灾事故案例及火灾特点的分析,结合我国目前铁路和公路隧道情况,提出了一种利用涡喷消防装备快速扑灭隧道火灾的方法,实践证明该方法扑灭隧道火灾快速有效。     

预氧化聚碳硅烷（PCS）纤维的无机化过程

针对预氧化PCS纤维无机化过程进行了研究 ,探讨了烧成过程中预氧化PCS纤维的投放量及保护气体流量等因素对纤维烧成过程的影响。实验发现烧成过程中产生的小分子气体活性基团阻止链自由基的结合 ,从而对纤维的进一步裂解起促进作用     

SiO_2在SHS铝热-重力分离法制备陶瓷内衬复合钢管中的作用

采用自蔓延铝热-重力分离法,制备了陶瓷内衬复合钢管,并系统研究了SiO_2添加剂对SHS燃烧过程、陶瓷层相对密度与组织结构、复合钢管力学性能的影响。经研究发现,SiO_2在铝热燃烧过程中作为稀释剂存在,随着SiO_2添加量增多,燃烧温度与蔓延速率下降,并使分布于α-Al_2O_3枝晶晶界处的亚稳定相FeO·Al_2O_3增多;陶瓷相对密度与复合钢管抗压溃强度在SiO_2含量为2wt％时出现极大值(分别为92.5％与430MPa);陶瓷硬度、断裂韧性与复合钢管抗压剪强度随SiO_2含量增加而降低。     

柴油喷雾碰壁特性的模拟计算

提出一个柴油喷雾碰壁的数学模型,计算分析了垂直碰壁和倾斜碰壁时虽面射流的传播和混合特性.建立了新的壁面射流贯穿距离计算公式,结果显示这种计算方法是分析柴油喷注碰壁性能的简单而实用的工具.