基于能力匹配的网络化防空作战联盟生成研究

作战联盟用于描述网络化防空作战的组织框架,其生成问题是研究网络化防空作战协同的基础。首先从任务、联盟表达、能力含义等方面对防空作战联盟问题进行了描述;然后从防空作战节点与面临任务在能力上的供需关系出发,建立匹配、匹配域、能力裕度等相关观念,并依据防空作战联盟形成的不同准则,分别建立基于能力裕度最大和基于执行节点数最少两个NADOC生成问题的约束优化模型;最后通过案例对模型进行了验证分析。     

质量块控制自旋导弹的Lyapunov稳定性分析

给出了质量矩控制导弹的动力学模型及在一定条件下的简化动力学模型;用Lyapunov分析方法给出了动稳定性条件。结果说明,推力和静稳定度越大,越有利于动态稳定;阻力越大越不利于动态稳定。     

Static and free vibration analyses of functionally graded porous variable-thickness plates using an edge-based smoothed finite element method

The main purpose of this paper is to present numerical results of static bending and free vibration of functionally graded porous (FGP) variable-thickness plates by using an edge-based smoothed finite element method (ES-FEM) associate with the mixed interpolation of tensorial components technique for the three-node triangular element (MITC3), so-called ES-MITC3. This ES-MITC3 element is performed to eliminate the shear locking problem and to enhance the accuracy of the existing MITC3 element. In the ES-MITC3 element, the stiffness matrices are obtained by using the strain smoothing technique over the smoothing domains formed by two adjacent MITC3 triangular elements sharing an edge. Materials of the plate are FGP with a power-law index (k) and maximum porosity distributions (Ω) in the forms of cosine functions. The influences of some geometric parameters, material properties on static bending, and natural frequency of the FGP variable-thickness plates are examined in detail.     

舰船研制中设计余量的权衡分析

分析了舰船及其装备研制的时间特点 ,给出了用于预测的空间特性有关计算公式 .对设计余量的种类和体现方式进行了讨论 ,并对国内外现有设计实例进行了详细的得失分析和权衡 ,在此基础上提出了分析结论 .     

车用CAN网络瞬态干扰的来源及控制

CAN网络结构设计对其抗干扰特性的影响很大,良好的结构设计可以提高系统的稳定性,从车内CAN网络被干扰的实际问题入手,通过对CAN网络上采集到的干扰信号进行研究,结合车内电子部件的工作原理及发生电磁干扰的原理,分析产生此问题的原因,提出解决方案,并通过测试验证了解决方案的有效性,通过干扰发生器施加更大强度的干扰的方法,验证了改进方案的安全裕度,达到使用要求。     

Aerodynamics analysis of a hypersonic electromagnetic gun launched projectile

A hypersonic aerodynamics analysis of an electromagnetic gun (EM gun) launched projectile configuration is undertaken in order to ameliorate the basic aerodynamic characteristics in comparison with the regular projectile layout. Static margin and pendulum motion analysis models have been applied to evaluate the flight stability of a new airframe configuration. With a steady state computational fluid dynamics (CFD) simulation, the basic density, pressure and velocity contours of the EM gun projectile flow field at Mach number 5.0, 6.0 and 7.0 (angle of attack = 0°) have been analyzed. Furthermore, the static margin values are enhanced dramatically for the EM gun projectile with configuration optimization. Drag, lift and pitch property variations are all illustrated with the changes of Mach number and angle of attack. A particle ballistic calculation was completed for the pendulum analysis. The results show that the configuration optimized projectile, launched from the EM gun at Mach number 5.0 to 7.0, acts in a much more stable way than the projectiles with regular aerodynamic layout.     

Polymer composite for antistatic application in aerospace

The phenomenon of static electricity is unpredictable, particularly when an aircraft flying at high altitude that causes the accumulation of static charges beyond a threshold value leading to the failure of its parts and systems including severe explosion and radio communication failure. The accumulation of static charges on aircraft is generated by the virtue of interaction between the outer surface of aircraft and the external environmental attributes encompasses air particles, ice, hail, dust, volcanic ash in addition to its triboelectric charging. In the recent years, advanced polymer-based composites or nanocomposites are preferred structural constituents for aircrafts due to their light weight and comparable mechanical properties, but such composite systems do not render low impedance path for charge flow and are subsequently vulnerable to effect of lightning strike and precipitation static. In this context, it is essential to develop conductive composite systems from non-conductive polymer matrix by nanofiller embodiments. The advent of carbon-based nanocomposite/nanomaterials have adequately addressed such issues related to the nonconductive polymer matrix and further turned into an avant-garde genre of materials. The current review envisioned to illustrate the detailed exploitation of various polymer nanocomposites in addition to especially mentioned epoxy composites based on carbon fillers like carbon black, carbon nanotube (single walled carbon nanotube and multi walled carbon nanotube) and graphene the development of antistatic application in aircraft in addition to the static charge phenomenon and condition for its prevalence in avionic systems.