1.06μm激光仿真测试中Mie散射影响分析

结合室内激光跟踪探测器仿真测试中脉冲激光目标指示信号的发射、传播和探测过程,探讨1.06μm波长脉冲激光大气传输中气溶胶米氏(Mie)散射对激光探测和跟踪的影响规律.通过建立室内气溶胶散射模型,进行激光指示散射信号传输的建模与仿真计算.数学仿真和实际测试数据的对比分析表明,该计算模型具有较高精度,为设计激光跟踪探测器探测和跟踪仿真测试布局和采取减小散射影响措施提供了参考.     

导弹飞行试验破片速度测定方法及其误差修正模型研究

破片速度的测量是导弹实弹飞行试验中一项难度较高的课题,准确的测量结果对于科学评价武器毁伤效能等技术指标具有十分重要的意义.立足国内技术现状,综述了导弹破片速度测量评定的一般方法,分析了各方法的基本原理,针对每种方法探讨了测量评定破片速度所存在的误差源.结合导弹实弹飞行试验特点及靶场试验实际情况,重点对采用靶网法测量单枚破片速度的误差及误差源进行了分析,给出了误差修正模型及提高测速精度的技术措施,并指出了靶场现有破片测速方案的不足和改进方向.论文成果在靶场实践中得到了部分应用.     

低温跨声速风洞设计中的真实气体效应研究

风洞以低温气体为介质运行时,气体会表现出热力和热值的不完全,风洞回路气体流动参数计算需要考虑低温真实气体效应。计算给出了氮气介质在温度100～323 K、压力100～450 kPa范围压缩性因子和比热比的变化规律,并通过将等熵膨胀系数引入一维完全气体流动方程,发展了低温跨声速风洞气流流动参数计算分析模型,获得了跨声速风洞高速运行时气流液化温度和压力的组合边界包络线。对比分析结果表明：在低温跨声速风洞的运行压力(115～450 kPa)和温度(110～323 K)范围内,基于等熵膨胀系数计算得到的气体流动状态参数的理论计算值与气体真实物理解的偏差小于1%,完全可满足低温跨声速风洞工程设计需求。     

应用于飞控系统评估的风洞虚拟飞行试验系统与关键技术分析

基于传统意义上的飞控系统评估方法的不足,分析了风洞虚拟飞行试验应用于飞控系统评估的优势;按飞控系统常用的姿态控制回路及制导控制回路的组成形式,介绍了风洞虚拟飞行试验系统方案与工作原理,详细分析了它与半实物仿真系统的差异;分析了风洞虚拟飞行试验应用于飞控系统评估需解决的关键技术问题,包括风洞虚拟飞行试验评估方法、飞行器模型设计技术、飞控系统改进技术及模型支撑技术。     

Analysis of down times of jib cranes—A stochastic approach

In this paper a case study dealing with the maintenance problem of jib cranes is presented. A jib crane is viewed as a complex system whose performance is observed as a single realization over period of time. After pointing out limitations of existing stochastic models to analyze the observed realization a new family of bivariate stochastic processes is introduced. The data of jib crane is analyzed using new model and cross‐validated using part of the data set. It is noted that the new family of stochastic processes is useful to analyze bivariate data where one of the variables is finitely valued and the other is nonnegative and continuous. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 231–243, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10006     

定数截尾的恒定应力加速寿命试验的优化设计

在指数分布场合下讨论了恒加试验的最优设计问题 ,得到了一系列与步加试验相对应的结果 .这里的最优准则是指正常应力水平下产品对数平均寿命估计的方差的极小化 .     

横风中双层客车车辆的风荷载研究

数值模拟了在横向风的 ,不同来流攻角作用下 ,双层客车车辆单体、铁路 2 4米预应力T形简支梁桥单体、双层客车车辆 - 2 4米预应力T形简支梁桥组合体、以及在不同路堤高度上双层客车车辆的气动三分力系数。研究表明 ,双层客车车辆在桥梁、路堤上所受风荷载均比双层客车车辆单独存在时明显增大 ,因而在计算双层客车车辆所受横向风荷载时 ,应重视桥梁、路堤对此产生的影响     

Blast resistance evaluation of urban utility tunnel reinforced with BFRP bars

To improve corrosion-resistance of shallow-buried concrete urban utility tunnels(UUTs),basalt fiber reinforced polymer(BFRP)bars are applied to reinforce UUTs.As the UUT must have excellent survival capability under accidental explosions,a shallow-buried BFRP bars reinforced UUT(BBRU)was designed and constructed.Repetitive blast experiments were carried out on this BBRU.Dynamic responses,damage evolutions and failure styles of the BBRU under repetitive explosions were revealed.The tunnel roof is the most vulnerable component and longitudinal cracks develop along the tunnel.When the scaled distance is larger than 1.10 m/kg1/3,no cracks are observed in the experiments.When the BBRU is severely damaged,there are five cracks forming and developing along the roof.The roof is simplified as a clamped-supported one-way slab,proved by the observation that the maximum strain of the transverse bar is much larger than that of the longitudinal bar.Dynamic responses of the roof slab are predicted by dynamic Euler beam theory,which can consistently predict the roof displacement under large-scaled-distance explosion.Compared with the UUT reinforced with steel bars,the BBRU has advantages in blast resistance with smaller deflections and more evenly-distributed cracks when the scaled distance is smaller than 1.260 m/kg1/3 and the steel bars enter plastic state.Longer elastic defamation of the BFRP bars endows the UUT more excellent blast resistance under small-scaled-distance explosions.     

长坑道中防护门上的化爆冲击波压力研究

为了对坑道中的防护门抗化爆冲击波进行有效的设计,先需确切知道作用在防护门上的反射压力。首先基于Hopkinson比例定律,用LS-DYNA动力有限元软件模拟了常规炸药在坑道入口外爆炸情况下,长坑道中自由场冲击波峰值压力的衰减规律,并由此确定作用在防护门上的反射压力。计算结果与其他经验方法的预测结果进行了比较。可供防护门的设计及动力响应研究参考。     

风洞现场电磁干扰测量研究

根据风洞现场测控系统的特点,对风洞现场的电磁干扰测量方法和技术进行研究,并在风洞中进行试验,得到了相关的试验数据．通过对数据的分析可以得出：影响风洞现场测控系统的电磁干扰源主要是大功率变频装置,耦合途径为空间辐射和电源线传导．