高比重钨合金的烧结成形与组织性能研究

采用液相烧结成形工艺制备了90W-Ni-Fe合金棒,通过分析烧结态钨合金的组织形貌和力学性能,观察合金的断口组织形貌,研究了烧结工艺对高比重钨合金组织性能的影响,认为减少W-W界面,增加W-W界面的结合强度,是提高烧结态钨合金力学性能的有效途径。     

回归再时效7A60铝合金在0.5mol/L NaCl溶液中的点蚀性能

采用腐蚀电化学的点蚀极化曲线并结合腐蚀形貌的扫描电镜分析的方法,研究了回归再时效(RRA)工艺处理7A60铝合金在0.5mol/L NaCl溶液中的点蚀行为,对其耐点蚀性能进行了评价,并探讨了RRA工艺改善该合金点蚀性能的机理。结果表明:采用120RRA工艺(120℃×24h预时效+195℃×0.5h回归+120℃×24h再时效)处理后,7A60铝合金在0.5mol/L NaCl溶液中的阳极极化曲线闭合环面积减小,再钝化电流密度Ipp降低,蚀孔较浅,RRA工艺在一定程度上改善了该铝合金在0.5mol/L NaCl溶液中的耐点蚀性能。     

损伤铝合金表面超声焊接界面断口分析与结合机理

采用超声焊接铝合金箔材的工艺修复处理表面腐蚀受损的2A12CZ基体,并利用Quanta200型环境扫描电子显微镜分析了截面形貌及箔材与基体之间界面表面断口的微观形貌。结果表明：从截面来看,箔材与基体之间大部分发生了焊合,界面分界线大部分消失;从机械脱开的界面断口来看,其表面微观形貌表现为鳞片状及韧窝状的典型金属型断口形貌。这说明在给定条件下,焊接部位大部分呈冶金结合。最后对铝台金箔材与铝合金基体之间超声焊接机理进行了探讨。     

复合铝基润滑脂制备与性能

复合铝基润滑脂是性能优良的多效润滑脂,尤其是泵送性能良好,适用于集中润滑系统,已在冶金等行业获得广泛应用。考察了组成、工艺和添加剂对复合铝基润滑脂性能的影响,复合铝皂对环烷基油的稠化能力优于对石蜡基油的稠化能力,增大基础油黏度有利于改善润滑脂的性能,采用异丙醇铝三聚物比采用异丙醇铝制备复合铝基润滑脂的工艺可靠,产品性能更稳定。通过配方和工艺条件优化,制备的复合铝基润滑脂具有高滴点,良好的胶体安定性、机械安定性、氧化安定性、抗水性、防腐性和抗磨性。     

Dynamic necking of a near α titanium alloy at high strain rates:Experiments and modelling

The tensile behaviour of near α Ti3Al2.5 V alloy, conceived for applications in aerospace and automotive engineering, is characterized from quasi-static to high strain rates. The material is found to present noticeable strain rate sensitivity. The dynamic true strain rate in the necking cross-section reaches values up to ten times higher than the nominal strain rate. It is also observed that beyond necking the dynamic true stress-strain curves present limited rate dependence. The experimental results at different strain rates are used to determine a suitable constitutive model for finite element simulations of the dynamic tensile tests. The model predicts the experimentally macroscopic force-time response, true stress-strain response and effective strain rate evolution with good agreement.     

Influence of magnetically constricted arc traverse speed (MCATS) on tensile properties and microstructural characteristics of welded Inconel 718 alloy sheets

The magnetically constricted arc technique was implemented to mitigate the heat input related metal-lurgical problems in Gas Tungsten Arc Welding (GTAW) of Inconel 718 alloy particularly Nb segregation and subsequent laves phase evolution in fusion zone. This paper reports the direct effect of magnetically constricted arc traverse speed (MCATS) on bead profile, tensile properties and microstructural evolution of Inconel 718 alloy sheets joined by Gas Tungsten Constricted Arc Welding (GTCAW) process. The mechanism amenable for the microstructural modification and corresponding influence on the tensile properties of joints is investigated both in qualitative and quantitative manner related to the mechanics of arc constriction and pulsing. It is correlated to the solidification conditions during welding. The relationship between MCATS and Arc Constriction Current (ACC) was derived. Its interaction effect on the magnetic arc constriction and joint performance was analysed. Results showed that the joints fabricated using CATS of 70 mm/min exhibited superior tensile properties (98.39% of base metal strength with 31.50% elongation). It is attributed to the grain refinement in fusion zone microstructure leading to the evolution of finer, discrete laves phase in interdendritic areas.     

化学敏感材料的应用与发展

对敏感材料的特点、分类及其在科技、化工等领域内的广泛应用和发展前景 ,进行了较全面的综述     

铝质壳体弹丸破碎性试验破片回收率研究

针对当前没有铝质壳体弹丸破碎性试验破片回收率标准的现状,进行某型铝质壳体破甲弹破碎性试验,认为破片回收率低的原因是回收过程中破片损失和部分金属铝熔化,并从理论上计算铝质壳体在爆炸破裂过程熔化率,验证试验中破片回收率的合理性。     

导线过负荷引燃能力的模拟实验研究

为了考查导线过负荷对不同可燃物的引燃能力，选择1．5,2．5和4mm^2三种规格的铝导线在不同倍数过负荷电流条件下进行实验，测得导线温度并观察过负荷导线对火场中常见的棉布、阻燃管、防水板的引燃能力。通过实验得出过负荷导线引燃能力与导线截面积、过负荷时间、过负荷电流的大小的关系，并讨论了可燃物种类对过负荷导线引燃能力的影响。结果表明，过负荷导线的引燃能力与过负荷电流和时间成正比，而导线的截面积对引燃能力的影响是多方面的。为防止火灾发生，在建筑物中布置导线时要远离可燃物并要穿阻燃管铺设。     

Multifunctional A356 alloy/ PKSAnp composites: Microstructure and mechanical properties

Mechanical properties and microstructure of multifunctional composites produced with palm kernel shell ash nanoparticle (PKSAnp)-A356 alloy composites was studied. The composites were produced using Double layer feeding stir casting method (DLF-SCM) by adding 1 wt%‒4 wt.% PKSAnp. The microstructure, density, electrical and mechanical properties were determined. The results shows that there was a uniform distribution of the PKSAnp in A356 alloy. The mismatch at the interface between the PKSAnp and A356 alloy was 4.26%. Improvement of 30.47%, 41.91%, 49.52%, 40.90% and 65.09% were obtained for hardness values, tensile, yield strength, %elongation and impact energy at 4 wt% PKASnp. The work has established that the developed composites can be used for multifunctional applications where combination of toughness and strength is vital.