基于多单片机系统的小口径火炮激光光幕靶设计

针对高射速、高射频火炮射速和密集度检测的难题,应用光电检测和单片机技术,研究设计了一种以多单片机系统为核心,适用于高射速、高射频小口径火炮射速和密集度检测的激光光幕靶系统。提出了一种新的激光光幕设计方案,推导了弹着点计算公式,阐述了系统中的关键技术。在实验室条件下进行了弹射枪模拟实验,结果表明:激光光幕靶操作简便,工作稳定可靠,能够有效克服自然光干扰,检测速度快,精度高。     

三氯氢硅的火灾危险性及消防安全对策

针对三氯氢硅存在的火灾危险性进行分析，探讨其卸载时应注意的事项，并提出有效的安全防护、泄漏处理、灭火等方面的有效措施。     

电偶腐蚀下非稳态扩散瞬时静电场分析

为分析在浓差极化条件下非稳态过程中的静电场分布情况，在斐克第二定律的基础上利用拉普拉斯变换求解电极表面氧浓度随时间的变化。通过法拉第定律分析受氧浓度控制下的电偶腐蚀电流密度，在此基础上利用电流元模型求解电解质溶液中任意位置处产生的瞬时电位及静电场强度，并通过实验验证结果的正确性。结果表明：浓差极化下的非稳态扩散传质产生的静电场及电位会随着时间的增加而逐渐减小，并最终达到稳态，且电流密度会随着氧的浓度减小而减小。     

Strain concentration caused by the closed end contributes to cartridge case failure at the bottom

Ruptures at the bottom of cartridges are a common cause of failure of ammunitions, which directly threatens the safety of weapons and shooters. Based on plastic tube theory, this study analyses the radial and axial deformation of a cartridge, considering the radial constraint of the closed end at the bottom of the cartridge. Owing to the influence of the closed end, the bottom of a cartridge does not establish complete contact with the chamber. Owing to strain concentration in the non-contact area, this area is more amenable to the occurrence of cartridge rupture. This theory predicts the location of the fracture more accurately than the traditional theory. The maximum axial deformation of a cartridge comprises bending and friction deformation. The maximum strain at the bottom of the cartridge increased by 135% owing to the introduction of bending strain caused by the closed end. The strain distribution of a cartridge was measured using digital image correlation technology, and the measured result was consistent with the predicted results of the bending deformation theory and rupture case. The effects of wall thickness, radial clearance, friction coefficient, and axial clearance on the axial deformation of the cylinder were studied. Increasing the wall thickness and reducing radial clearance were found to reduce bending deformation; furthermore, lubrication and reduction in axial clearance reduce frictional deformation, which in turn reduce cartridge rupture.     

Mathematical formulation and heuristic algorithm for the block relocation and loading problem

This study considers the block relocation and loading problem in container terminals. The optimal loading sequence and relocation location are simultaneously decided on the basis of the desired ship‐bay and initial yard space configuration. An integer linear programming model is developed to minimize the number of relocations in the yard space on the basis of no shifts in the ship bay. The accuracy of the model is tested on small‐scale scenarios by using CPLEX. Considering the problem size in the real world, we present a rule‐based heuristic method that is combined with a mathematical model for the removal, loading, and relocation operations. The influence of rules on algorithm performance is also analyzed, and the heuristic algorithm is compared with different types of algorithms in the literature. The extensive numerical experiments show the efficiency of the proposed heuristic algorithm.     

作战仿真数据集成框架研究及实现

作战仿真数据的集成与整合是我军数据工程建设项目的重要内容.以ETL及消息中间件(MOM)技术为基础,设计了一种基于消息中间件的抽取、转换、传输与加载(ETTL)的作战仿真数据集成框架.分析了系统结构模型及各模块相互关系,提出了一个可行的数据集成解决方案.介绍了一个分布式数据集成系统平台的设计与实现,并结合一个数据集成实例详细阐述了该系统在我军军事演习中的应用.     

装甲车辆润滑油监测数据关联分析

利用灰色关联分析方法对装甲车辆变速箱润滑油监测数据进行了分析，说明了油样中铁谱磨粒浓度和油液污染度之间的关联性，为润滑油不同监测参数间的相互验证提供了一种方法。     

基于灰色理论的鱼雷装载可靠性分析

为解决在鱼雷装载可靠度试验数据较少的情况下进行装载可靠性分析困难的问题,利用灰色系统理论及 GM(1,2)建模的思想,研究了鱼雷装载可靠度和工作可靠度之间的灰色关系,基于灰色系统理论建立了两者之间关系的数学模型.计算实例表明,该方法简单实用,可在鱼雷装载可靠度数据样本量较少的情况下对鱼雷装戢可靠度进行有效预测,为鱼雷装载可靠度的评定提供了理论参考.     

Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics, sustainability concept and environmental issues, hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications (structural, military, aerospace and automotive vehicles). Compression, tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced (PVB) polyvinyl butyral by hot hydraulic press technique were experimentally conducted. Six types of fabricated composites with various constituents (jute, carbon and their hybrids) were fabricated and tested. Notably, fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content. On the other hand, Jute composites possess high strain compared to pure carbon composite, which gives an overall improvement in mechanical behaviours. Interestingly, H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading. Carbon composite (C) exhibited the highest fatigue resistance, whiles jute composite (J) possessed the highest strain and semi brittle trends in both mechanical and fatigue performance. Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.     

Fragment spatial distribution of prismatic casing under internal explosive loading

Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control. The fragment spatial distribution of prismatic casings is more complex than that of traditional cylindrical casings. In this study, numerical and experimental investigations into the fragment spatial distribution of a prismatic casing were conducted. A new numerical method, which adds the Lagrangian marker points to the Eulerian grid, was proposed to track the multi-material interfaces and material dynamic fractures. Physical quantity mappings between the Lagrangian marker points and Eulerian grid were achieved by their topological relationship. Thereafter, the fragment spatial distributions of the prismatic casing with different fragment sizes, fragment shapes, and casing geometries were obtained using the numerical method. Moreover, fragment spatial distribution experiments were conducted on the prismatic casing with different fragment sizes and shapes, and the experimental data were compared with the numerical results. The effects of the fragment and casing geometry on the fragment spatial distributions were determined by analyzing the numerical results and experimental data. Finally, a formula including the casing geometry parameters was fitted to predict the fragment spatial distribution of the prismatic casing under internal explosive loading.