基于一种模型的中子星结构

从物态方程出发,利用中子星结构方程计算了中子星的结构。得到了引力质量材M_G=1.27M_θ材,转动惯量I=1.29x10(45)g/cm~2,与观测结果符合较好。     

粉末粒度对储氢电极电化学性能的影响

以M1（NiCoMnTi）5为例,系统研究了粉末粒度对储氢电极电化学性能的影响。结果表明,在试验粒度范围内,合金粉越细,其放电容量越高,高倍率放电性能和循环稳定性也越好;将两种不同粒度的合金粉混合使用时,粒径相差越大,其放电容量越高。且当粗细粉质量比为7：3时,放电容量最高。     

一种RetinaNet与SE融合的航空取证目标检测算法

针对在开展航空侦察取证时缺乏自动化、智能化取证手段的情况,提出了一种基于Reti-naNet与SE融合的航空取证目标检测算法,解决目标尺度变化大、数据集中类别不均衡的问题,并通过SE (squeeze-excitations)模块引入注意力机制进一步改进性能.该改进算法中的特征金字塔网络FPN可有效应对目标尺寸变化较大...     

一种基于移动基站的无线传感器网络数据收集方法

针对传统的无线传感器网络数据收集协议大多受制于发生在基站周围的热点问题,提出了一种使用移动基站的数据收集方法.将数据收集问题转化为支配集构造和旅行商问题,并提出了一种分布式的支配集构建算法,结合旅行商问题的近似算法生成基站的移动路线.仿真结果表明,所提出的方法减少了通信消耗,且能使负载均衡地分布.     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Optimal sample size allocation for tests with multiple levels of stress with extreme value regression

In this article, we discuss the optimal allocation problem in a multiple stress levels life‐testing experiment when an extreme value regression model is used for statistical analysis. We derive the maximum likelihood estimators, the Fisher information, and the asymptotic variance–covariance matrix of the maximum likelihood estimators. Three optimality criteria are defined and the optimal allocation of units for two‐ and k‐stress level situations are determined. We demonstrate the efficiency of the optimal allocation of units in a multiple stress levels life‐testing experiment by using real experimental situations discussed earlier by McCool and Nelson and Meeker. Monte Carlo simulations are used to show that the optimality results hold for small sample sizes as well. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

基于Multi-agent临床诊断支持系统的设计

根据临床诊断支持信息环境的特点,结合Agent技术,设计了一套基于Multi-agent的临床诊断支持系统(CDSS)。该系统具有异构性、分布性、并行性和可扩展性,能适应CDSS的要求,有效地提高CDSS的性能。     

总线型导弹控制系统状态监测与故障诊断技术

分析了总线型导弹控制系统的地面测控体系及其特点,阐述了系统中单机部件的组成结构及其BIT技术;提出了新的测控体系下导弹控制系统状态监测和故障诊断方法,重点针对总线数据接口格式、系统知识表示和状态监测与故障诊断流程进行了讨论。