南水北调中线工程安阳段渠坡换填土的强度特性研究

为了分析南水北调中线工程安阳段渠坡的稳定性,对该渠坡换填土在不同含水率下进行了不固结不排水三轴剪切试验.研究结果表明:剪切速率对基质吸力的影响较大,而对强度的影响较小;通过比较确定了合适的剪切速率;含水率相同的试样在不同围压下的强度值在pf -qf坐标上呈良好的线性关系;得到了试样在不同含水率下的总强度指标,建立了总内...     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

概率分布模型的飞机战备完好率评估与预测

飞机战备完好率是军用飞机战斗力的重要体现.在分析目前部队常用的飞机战备完好率算法缺陷的基础上,建立了基于概率分布的飞机战备完好率计算模型,该模型体现了飞机任务可靠性、维修性与战备完好性之间的关系.以某型飞机为例,通过分析飞机任务可靠度,利用飞机可靠性、维修性、保障性及作战训练任务的历史统计数据,依据概率分布模型对飞机的...     

逆系统空空导弹控制器设计(英文)

利用非线性控制的逆系统方法,设计了导弹质心运动动力学系统的控制器。该控制器通过对弹道坐标系下导弹的切向过载和法向过载的控制,使导弹在控制系统中的速度、弹道倾角和弹道偏角输出信息渐近跟踪制导指令,以实现空空导弹对攻击目标的打击。仿真结果表明,导弹的质心运动参数以较高的精度快速跟踪制导指令,系统性能良好。     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

N、P源对微生物法处理石油烃效果的影响

在微生物法处理石油烃的过程中,微生物对N、P源的供给非常敏感,不同的微生物对不同的N、P源的生物利用度是不相同的,N、P源的选择对降解效果有较大影响,所以有必要对最佳的N、P源进行筛选。对N、P源的逸择和加入量对降解效果的影响进行了研究,确定了最佳的N、P源分别为(NH4)2SO4、KH2PO4。在(NH4)2SO4、KH2PO4的质量浓度分别为100mg／L和60mg／L时,废水中石油烃的去除率最高。     

用于纯方位机动目标跟踪的机动探测法

假设目标在某时刻发生折线机动,并且目标在机动前后都是做匀速直线运动。所提出的机动探测算法通过探测这种变化得到探测时刻。这种算法是基于对方位预测误差的均值变化进行分析的。然后估计出目标机动时刻,并从机动时刻起重新设置滤波器,估计出目标机动后的运动参数。典型的机动TMA态势仿真结果表明,该算法对于一般的目标折线机动可以有效地进行跟踪。     

舰载单脉冲跟踪雷达数学建模与仿真

根据典型舰载单脉冲跟踪雷达的组成及工作原理,介绍一种舰载单脉冲跟踪雷达仿真建模方法。重点描述了仿真原理及仿真模型组成,介绍了雷达信号特性仿真、雷达伺服系统仿真、雷达信号处理系统仿真等关键环节的数学仿真模型。结合仿真软件功能需求,给出了软件结构、软件运行流程等仿真软件设计要点。     

基于实际案例的导弹装备战斗损伤评估

指出了基于实际案例的通用导弹装备战斗损伤评估内容及特点,提出了战斗损伤评估的量化标准,定义了战损率的概念;采用向量夹角余弦方法综合出了导弹装备各级组件的战损率及车辆的战损量化值,并通过实例证明了该方法具有所需信息量小、主客观综合性强、评估方法易于仿真实现等优点.