高硬热喷涂层的缓进给切削试验

采用高硬材料切削过程中常用的2种刀具材料CBN和YG610,应用缓进给的模式对高硬喷涂层进行切削试验。试验结果表明：采用小进给切削模式YG610刀具切削高硬热喷涂层可以获得较理想的刀具耐用度,并且加工表面质量可以达到Ra1以下,具备了以车代磨的基本条件。高硬材料切削常用的刀具CBN在切削过程中出现了较严重的非正常破损现象。通过对试验现象的分析,可以认为冲击性和高硬度的同时存在是喷涂层切削的最重要特性。因此,喷涂层切削刀具需要同时具备较高的韧性和硬度。     

Fabrication and characterization of Al-CuO nanocomposites prepared by sol-gel method

In this study, Al-CuO nanocomposites were fabricated by sol-gel method. As a contrast, the thermite was prepared by physical mixing at the equivalence ratio of 0.5, 1, 2, respectively. The intermediates and samples as prepared were characterized by SEM and XRD. The exothermic properties of the two samples prepared at different equivalence ratios were tested and the reaction products were characterized by XRD. The SEM results show that the sample prepared by the sol-gel method demonstrates a micron-sized agglomerated sphere formed by a mutual wrapping of Al NPs and CuO NPs, and the particles are evenly distributed in the agglomerate. In addition, when the content of Al powder is seriously insufficient, the heat release of the sample prepared by physical mixing is 1.6 times that of by sol-gel method. With the increase of Al powder content, the exothermic properties of Al/CuO NPs prepared by sol-gel method began to increase significantly compared with physical mixing and the difference is 1.5 times when the equivalence ratio increases to 2. It can be concluded that the reason for this result may be attributed to the different mass transfer modes of components due to the different morphologies of samples.     

复合材料层合结构层向理论及应用进展

层向理论是由Reddy提出来的一种用于精确分析复合材料层合结构的三维板壳分析理论。由于不引入任何的变形和应力假设条件,因此相较于传统的等效单层板理论,层向理论在分析大厚度复合材料层合板壳结构的静动态响应及其局部层间效应时具有较大的优势。系统地综述了层向理论近年来的研究进展、数值解法及其应用情况。具体包括:层向理论的基本原理及发展现状、基于层向理论的有限元方法及改进模型、层向理论在复合材料层合结构静动态响应及含损伤问题领域的应用等。并对该理论可进一步拓展的研究方向进行了展望。     

耐1200℃陶瓷瓦重复使用性能

针对目前比较成熟的耐1 200℃陶瓷瓦开展了1 200℃多次重复热处理,研究了陶瓷瓦的结构和性能演变行为和重复使用性能。结果表明:1 200℃热处理20次后,耐1 200℃陶瓷瓦表现出良好的宏观热稳定性;重复热处理过程中,纤维间烧结,黏接熔融和石英纤维析晶及晶粒长大,使纤维直径发生变化,出现缩颈,进而导致了Z向收缩,收缩率达14%,从而使得压缩强度略有增大,隔热性能降低;经过1 260℃、11次单面辐射加热后,Z向收缩率为5.58%,隔热效果降低了7.59%,但隔热材料能够在6次重复加热后保持材料隔热性能不降低。     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

压电材料中的共线非等长多裂纹问题

建立了横观各向同性压电材料中的共线非等长多裂纹模型。将裂纹模拟为连续分布的广义位错,推导了单点广义位错的格林函数,并基于此得到了共线非等长多裂纹的奇异积分方程组,最后由数值计算给出了裂纹尖端的能量释放率。对奇异积分方程组的退化分析和对称条件下的数值结果的讨论,验证了本文结果的正确性。研究表明:当共线裂纹间距小于裂纹长度时,裂纹尖端场存在显著的干涉效应;裂纹越长,干涉效应越显著;电载荷系数越大,能量释放率也越大;相对于外侧尖端而言,共线裂纹内侧尖端对电载荷系数更为敏感。     

压电界面电极的应力强度因子

建立了压电界面电极的力学模型，利用有限傅里叶变换方法将相应的力电耦合问题描述为奇异积分方程，并得到了界面应力及其强度因子的解析解。讨论了结构几何参数对应力强度因子的影响。基于强度设计的观点得到两方面的结论：一是界面中心电极优于偏置电极；二是界面长度的最优值为中心电极长度的2倍。     

Analysis for the residual prestress of composite barrel for railgun with tension winding

Based on the elastic theory of cylindrical shells and the theory of composite laminates, a prediction model for the residual prestress of the simplified round composite barrel for railgun is established. Only the fibre pretension is considered in this model. A three dimensional numerical simulation for the residual prestress in the railgun barrel is carried out, by combining the temperature differential method with the element birth and death technology. The results obtained by the two methods are compared. It reveals that the distribution trends of residual prestress are consistent. And the difference for residual prestress in the filament wound composite housing of barrel is relatively small. The same finite element method is used to analysis the residual prestress in the non-simplified composite barrels for railgun, which are under different control modes of winding tension. The results mean that the residual prestress in barrel will increase while the taper coefficient for winding is decreasing. Therefore, the sealing performance in bore is improved, but the strength of the filament wound composite housing drops. In addition, the axial and circumferential residual prestress in the filament wound composite housing with constant torque winding are close to the ones in iso-stress design for barrel.     

B4C/Al复合板中应力波行为分析（Ⅰ）

依据7.62mm穿甲燃烧弹与B4C,Al板的物理和力学特性,提出弹、板的力学模型;在此基础上,给出弹板碰撞后B4C/Al复合板的弹性动力学方程,建立应力波的传播模型,讨论了应力波传播时复合板的力学行为,最后确定了复合板承受的初始冲击应力。理论分析表明：一维应变条件的B4C和Al板的弹性极限高于一维应力条件下的值;弹、板间的作用力服从指数衰减规律;B4C板的初始应力高于430MPa时,应力波的作用使Al板在卸载过程中发生反向屈服。     

Reactor-grade plutonium and nuclear weapons: ending the debate

The claim that reactor-grade plutonium cannot or will not be used to produce nuclear weapons has been used to justify non-nuclear-weapon states’ large stockpiles of plutonium that has been separated from highly radioactive spent fuel. However, by using reduced-mass plutonium cores, it is possible to manufacture reliable nuclear weapons with reactor-grade plutonium. These weapons can have the same design, size, weight, and predetonation probability as weapons using weapon-grade plutonium and would require no special cooling. The increased radiation from reactor-grade plutonium could be easily managed by shielding and operational procedures. Weapons using plutonium routinely produced by pressurized-water reactors could have a lethal area between 40 percent and 75 percent that of weapons using weapon-grade plutonium. In the past, both Sweden and Pakistan considered using reactor-grade plutonium to produce nuclear weapons, and India may be using reactor-grade plutonium in its arsenal today. Despite claims to the contrary, the United States used what was truly reactor-grade plutonium in a successful nuclear test in 1962. The capability of reactor-grade plutonium to produce highly destructive nuclear weapons leads to the conclusion that the separation of plutonium, plutonium stockpiling, and the use of plutonium-based fuels must be phased out and banned.