太阳能光电热系统换热器性能实验研究

设计了新型半圆管形式的不锈钢板式换热器,对其作为太阳能光电热综合利用一体化系统集热组件的性能进行实验研究。通过新型集热光电热组件及光电组件系统的对比实验,研究该光电热组件在重庆地区夏季应用情况,分析其光电和光热特性。结果表明:在以晴朗为主的天气,半圆管形式的不锈钢板式光电热组件电热系统的电热性能与光电组件系统的相比较,前者的太阳能电池输出功率提高约26.48%,热利用效率提高23.70%以上,新型半圆管形式的光电热组件整体光电热(光电+光热)综合效率可达到25.70%,有效提高了光电热系统的综合效率。新型半圆管形式不锈钢板式换热器的换热面积增大,提高了换热效率,为太阳能光电热综合利用一体化系统在重庆等太阳辐射强度较小地区的应用提供了参考。     

From the Editors

Israel's policy of military reprisals has never seemed to follow any consistent pattern of tit‐for‐tat. On the one hand, not every violent incident was answered with a counterattack. On the other hand, when Israel responded, frequently it employed an excessive amount of force, which was disproportional to the Arab provocation. This behavior has not been the consequence of a premeditated and rational strategy. Instead, it appears to have been the result of a political dispute between alternative approaches regarding the use of military force. The following research analyzes the development of this controversy and how these differences of opinion were resolved.     

The unnecessary uprising: Jeju Island rebellion and South Korean counterinsurgency experience 1947–48

This paper systematically analyzes the causes of the escalation of violence during the initial stages of the Jeju Island Rebellion and the failure of South Korean counterinsurgency operations. It is argued that four interrelated factors provided the conditions for armed insurgency in the small island of Jeju: inter-agency tension between the Korean National Police (KNP) and the Korean Constabulary; the mainlanders' misinterpretation of the insurgency; the effect of systematic police brutality; and the role of youth groups. Consequently, two counterinsurgency lessons will be drawn from this study: that inter-agency cooperation and coordination at the tactical level between security branches and the incorporation of local population at the micro-level is essential in conducting efficient and effective counterinsurgency operations.     

燃烧加热型煤油加热器工作特性试验

针对冲压发动机地面试验应用需求,设计了基于燃气加热方式的煤油加热器,通过试验的方法研究了多个因素对其工作特性的影响规律。研究结果表明,该煤油加热器加热能力强,响应时间短,可在线制备超临界/裂解态煤油;其中,燃气温度、流量和煤油流量是影响煤油加热器工作特性的主要因素,通过控制燃气温度和流量可以大范围调节煤油温度,能满足冲压发动机不同试验工况的应用需求。     

基于联合相似测度的SAR图像边缘点特征配准方法

针对SAR图像配准过程中几何变换影响特征匹配稳健性和适应性的问题,提出了一种在特征匹配过程中直接解算几何变换模型的边缘点特征配准方法。利用SAR图像边缘点的梯度和方向特征,基于像素迁移思想,定义了图像匹配的联合相似度——联合特征均方和(SSJF),并建立了SAR图像边缘点集相似性匹配准则;基于方向模板提出了改进的ROEWA算子;利用改进的遗传算法(GA)来进行相似度的全局优化搜索,获取配准模型参数;利用多幅SAR图像的配准试验,对本文方法的性能进行了验证。     

机动飞行条件下基于SIFFBP算法的机载UWB SAR成像

机动飞行条件下,运动误差的幅度较大,频域运动补偿精度难以满足机载超宽带合成孔径雷达(UWB SAR)高精度成像的要求,需要采用精确的时域后向投影(Back Projection,BP)算法,然而原始BP算法的巨大计算量限制了其实际应用。提出了一种基于子图像快速因式分解BP(Sub-image Fast Factorized BackProjection,SIFFBP)算法的机动飞行条件下机载UWB SAR成像方案,并对其子孔径和子图像划分的约束关系进行了推导,给出了算法步骤,并分析了算法的计算量。仿真和实测数据处理结果表明,SIFFBP算法能够在保证处理精度的同时,大幅度提高处理效率,非常适合于机动飞行条件下的机载UWB SAR成像处理。     

基于HLA的防区外空面导弹攻防对抗仿真

针对HLA/RTI在接口规范、对象模型模板等关键技术建立分布式仿真平台的复杂性,提出了利用数字武器开发平台进行开发的方法,构建防区外空面导弹攻防对抗系统体系结构,实现了该体系结构联邦成员划分、设计联邦/仿真对象模型表等HLA仿真关键技术,并采用面向对象建模与仿真技术建立了各联邦成员的数学模型.该仿真结果表明,各联邦成员的数学模型与底层支撑环境能够相互分离,仿真模型具有良好的交互性和互操作性,可通过添加或删除联邦成员仿真不同的复杂战场想定,并可作为验证不同算例的仿真平台.     

基于行为建模的移动代理性能评估

针对移动代理的分布式应用性能评估需求,建立了移动代理生命周期中主要行为的网络负载模型和时间消耗模型.在3种典型分布式应用想定下,分析了基于C＼S模式和移动代理模式的应用实现基本过程,对两种模式下的网络负载和执行时间进行了仿真比较,结果证明了在访问节点数量较多,网络传输速率较低时,移动代理模式的具有更好性能.     

基于飞蛾信息素寻偶机制的无人机集群协同搜索

为了提高无人机集群协同搜索移动目标的效率,提出一种基于飞蛾信息素寻偶机制的无人机集群协同搜索方法。根据飞蛾基于信息素选择飞行方向的寻偶行为,建立信息素图风向模型和飞蛾信息素寻偶模型。考虑无人机机间避撞约束,提出从飞蛾信息素寻偶机制到无人机集群分布式协同搜索的映射,并给出具体实现流程。仿真实验结果表明了所提方法在解决单个移动目标的协同搜索问题时的有效性和稳定性;外场飞行试验表明了所提方法在实际应用中的可行性。     

Investigation of the shock compression behaviors of Al/PTFE composites with experimental and a 3D mesoscale-model

The responses of AI/PTFE reactive materials (RMs) under shock compression were investigated by a single-stage gas gun.A 3D mesoscale-model was established based on micro-computed tomography(micro-CT) slice images and confirmed with experimental results.In the high-pressure stage,the com-posites reacted partially,whereas there were no deviations between the partially reacted Hugoniot and the inert simulation results.The simulation reveals that the Teflon matrix melting on the high shock pressure.Melts and decomposition of the PTFE accelerated the diffusion of the atoms.Thus,the reactions of the Al/PrFE composites are more like a combustion rather than a detonation.