测量TOA和DOA的单站无源定位跟踪可观测条件

单站无源定位跟踪技术中,可观测性分析是一个关键问题,但是由于TOA测量方程的非线性程度太高,直接通过计算Jacobin矩阵得到的可观测矩阵形式非常复杂,很难得出明确的分析结果。采用新的思路推导了一种TOA测量方程的线性化方程,分析了测量TOA和DOA单站无源定位的可观测条件。最后给出了计算机仿真结果。     

Local search methods for the discrete time/resource trade-off problem in project networks

In this paper we consider the discrete time/resource trade-off problem in project networks. Given a project network consisting of nodes (activities) and arcs (technological precedence relations), in which the duration of the activities is a discrete, nonincreasing function of the amount of a single renewable resource committed to it, the discrete time/resource trade-off problem minimizes the project makespan subject to precedence constraints and a single renewable resource constraint. For each activity, a work content is specified such that all execution modes (duration/resource requirement pairs) for performing the activity are allowed as long as the product of the duration and the resource requirement is at least as large as the specified work content. We present a tabu search procedure which is based on a decomposition of the problem into a mode assignment phase and a resource-constrained project scheduling phase with fixed mode assignments. Extensive computational experience, including a comparison with other local search methods, is reported. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 553–578, 1998     

Determining a threshold control policy for an imperfect production system with rework jobs

Consider a threshold control policy for an imperfect production system with only a work center handling both regular and rework jobs. An imperfect production system studied here, generates defect jobs by factors other than machine failures. A threshold control or (ω, s) policy sets the guideline for a work center to switch between regular and rework jobs. A production cycle begins with loading and processing of several batches of regular jobs with a lot size equal to s. The outcome of each completed regular job is an independent Bernoulli trial with three possibilities: good, rework, or scrap. Once the work center accumulates more than a threshold ω of rework jobs, it finishes the last batch of regular jobs and switches to rework jobs. The objective of this research is to find a threshold ω and a lot size s that maximize the average long‐term profit. The ultimate goal is to construct a simple algorithm to search for ω and s that can be implemented directly in production management systems, as a result of this work. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 273–301, 1999     

通用计算机实时仿真技术

通用计算机由于各种相互兼容的标准硬件及丰富的应用软件支持而获得了广泛的应用,但通用计算机往往运行多任务的操作系统,这种通用操作系统一般不能满足半实物仿真的实时性要求。讨论了通用计算机半实物仿真的实时时钟获取方法,重点研究了通用操作系统的帧时间不稳定问题。提出了保证实时仿真帧时间的几种方法,并建立了一个具体的通用仿真计算机系统。试验结果表明,基于通用计算机的实时仿真是可行的。     

GPS一维弹道修正引信修正算法研究

通过分析基于GPS测量的一维弹道修正引信以及GPS接收机本身数据的特点,提出了一种以GPS测量数据作为初始数据,结合阻尼弹道系数对部分弹道进行解算的实时弹道修正算法,并进行了仿真试验。     

基于PIC系列单片机的迫弹电子时间引信控制系统设计

介绍了迫弹电子时间引信控制系统的电路组成、工作原理及其功能,并以PIC16F873A型单片机作为控制器核心,对引信的工作过程进行控制,提高了引信的安全性和可靠性。     

车载电子稳像算法的研究

稳像算法的研究对实现电子稳像有重要的作用.介绍了车载电子稳像技术的基本概念、原理以及常 用的典型算法,给出了一种典型的电子稳像系统,结合车载摄像系统成像的特点,选用投影法作为车载电子稳像的算法,并用该算法对实拍的车载摄像系统所获取的图像序列进行稳像实验,实验证明了该算法用于车载电子稳像的可行性及有效性.     

一类非线性动力系统的时滞反馈分叉控制

对时滞控制作用下的参数激励van der Pol-Duffing方程进行了研究,着重研究了时滞参数对该类参数激励系统的1/2亚谐共振-主参数共振分叉响应控制。首先采用摄动法从理论上推导出时滞动力系统的分叉响应方程,再采用数值模拟的方法研究了时滞参数对系统分叉响应的影响。研究结果表明,适当选取时滞参数,不仅可以改变分叉响应曲线的拓扑形态,还可以平移分叉响应曲线,即使其分叉提前或滞后,还能同时满足这两种要求。     

纳秒级电磁脉冲模拟器的研制

介绍了纳秒级电磁脉冲模拟器的组成和主要指标,分析了脉冲高压电源的各项参数对脉冲模拟器输出波形上升前沿的影响,给出了实测数值和波形。测量结果表明此电磁脉冲模拟器可以输出前沿大约为2 58ns、衰落时间约55ns的双指数脉冲波。     

定常态不可逆卡诺热机面积特性

对定常态不可逆卡诺热机进行了有限时间热力学分析.定义了功率、效率和面积比系数,并导出三者的关系式,由此对热机最佳功率、效率和面积特性进行了分析和讨论,给出了一些有益的结论.