含脉冲负载的综合电力系统储能优化配置研究

考虑到舰船环境限制和高能脉冲负载对储能的需求,有必要对储能装置进行合理的选型和优化配置,来提升综合电力系统性能。为此,基于带权极小模理想点法和层次分析法,提出了一种储能装置性能评价函数,并以其为优化目标,进行储能装置优化配置。所提出的评价函数充分考虑系统需求和脉冲负载特性,以储能装置体积、质量和经济性作为评价函数主要组成部分,同时考虑功率、能量、电压、荷电状态等约束,建立优化配置模型,并采用差分进化算法进行求解。以高性能锂电池和超级电容器为例,对所提模型进行求解计算,结果表明在所给权重系数下锂电池性能更优,更适用于综合电力系统,并给出了优化配置后的指导方案。     

爆炸成型弹丸贯穿靶板靶后破片空间分布模型

深空撞击载荷对探测小天体内部物质成分和结构特性具有重要意义,因此,在考虑爆炸成型弹丸(explosively formed projectile, EFP)可变截面的特性和区分靶后破片来源的基础上,建立了EFP贯穿靶板靶后破片空间分布模型。在靶板厚度30 mm至70 mm、EFP着靶速度1 650 m/s至1 860 m/s的条件下,该模型可以定量预测靶后破片云中各个破片的速度、质量、数量与空间位置的关系。结果表明,相对速度总是随相对空间位置的增加而呈线性增加,相对质量、相对数量总是随相对空间位置的增加而呈幂函数增加。     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

Economic Competition and Nuclear Cooperation

The number of bilateral nuclear cooperation agreements surged during the “nuclear renaissance” of the past decade. This proliferation is only partially explained by the prevailing approaches that focus on strategic imperatives. To supplement these explanations, this study draws on neoliberal models of economic competition to posit that bilateral agreement negotiations also exhibit conditions of “uncoordinated interdependence” and maneuvering to gain market share. Case evidence suggests the contours of supplier state bids for civilian assistance are determined at least as much by considerations about economic competition as they are by positive strategic goals. In addition, this study identifies several cases of cooperation where there appears to be little or no strategic motive for export agreements. The study concludes that patterns of economic competition and the influence of peers in defined competitive spaces alter material payoffs and impact policies. It also identifies a surprising role for principled restraint in dampening strategic and economic competition in some dyads.     

基于能源互联网背景的储能二次电池技术发展分析

能源互联网是在现有配电网基础上,融合新能源技术和互联网技术,将分布式能源采集装置和分布式能源储存装置联合发展起来的新技术,对于优化能源结构和提高能源利用具有重要的意义。文章以能源互联网对储能电池的需求为背景,首先归纳了能源互联网对于储能电池的要求,在此基础上重点分析了多种可应用于能源互联网的储能电池的性能与特点,并对其未来发展趋势进行了展望。     

雷达信号仿真中箔条干扰回波模型研究

雷达信号仿真是抗干扰算法研究和验证的有效措施。针对箔条干扰随机信号模型难以满足高精度仿真的需要,本文在分析和总结箔条干扰散射特性和运动特性的基础上,对箔条干扰回波模型进行了更深入和精细化的研究。在Matlab平台上通过编程优化克服了复杂计算的问题,并获得了较好的模拟效果。仿真实验表明,该模型可为精确研究箔条干扰提供数据支持。     

空投设备气囊缓冲系统的缓冲特性分析与匹配方法

采用解析分析法,根据排气口流量方程和载荷运动方程建立了无量纲的空投设备气囊缓冲过程数学模型,并根据此模型构造了气囊的匹配设计图。讨论了排气口面积、气囊高度、着陆初速度、载荷质量、气囊底面积及排气口开启压力等参数对气囊缓冲性能的影响,提出了空投设备气囊缓冲系统的参数匹配设计方法,为空投设备气囊缓冲系统的匹配设计提供了技术支持。     

基于营区精、气、神文化表达的自然仿生设计

精、气、神文化是营区规划设计的核心.自然仿生设计为营区精、气、神文化的表达提供了独特而有效的方式.通过对营区精、气、神文化的解读,发掘出自然仿生的3个层面,即“形”之仿生,“意”之仿生和“结构”之仿生.在营区规划设计中,当自然仿生的这3个层面得到有效表达,实现有机统一,营区就会产生独特的文化气质与魅力,从而体现其精、气、神特色,展现部队的“军营魂”.     

超宽带强电磁防护能量选择表面设计

为应对强电磁脉冲对电子信息系统的威胁,设计了一种具备收发兼容特性的超宽带强电磁防护能量选择表面,有效拓展了能量选择表面的工作带宽和工作频率,可为L、S、C波段的超宽带用频装备提供不低于14 dB的防护效果。该能量选择表面是一种周期结构,每个单元包含一对箭头形结构和一个开关二极管,可根据外界辐照电磁波的能量密度自适应切换反射或透波状态,从而实现强电磁防护与工作信号收发兼容。仿真研究表明,这一新型能量选择表面在L、S、C波段的插入损耗小于1 dB,强电磁防护能力达到22 dB。在波导中对设计的样件进行了性能验证,结果显示,该样件在波导中的平均插入损耗为1 dB,防护能力达到了14 dB,初步验证了设计结构的低插入损耗和高防护特性。     

电扫偶极子相控阵天线的空域极化特性分析

推导了偶极子线性阵列和平面相控阵天线在空域波束电扫时辐射场的极化特性,建立了数学模型。计算结果和仿真分析表明:偶极子相控阵天线辐射场在空域扫描各个波位的极化特性并不一致,是具有一定差异的,当待测目标的方向偏离天线电轴方向时,所接收到的电波极化状态也会随偏离电轴的方向和仰角而改变。该结论对于现代电子战中相控阵天线系统的精确建模与仿真具有重要意义,对于研究和利用天线的极化特性进行雷达极化抗干扰技术是非常必要的。