Influence of porosity distribution on nonlinear free vibration and transient responses of porous functionally graded skew plates

This article deals with the investigation of the effects of porosity distributions on nonlinear free vibration and transient analysis of porous functionally graded skew (PFGS) plates. The effective material properties of the PFGS plates are obtained from the modified power-law equations in which gradation varies through the thickness of the PFGS plate. A nonlinear finite element (FE) formulation for the overall PFGS plate is derived by adopting first-order shear deformation theory (FSDT) in conjunction with von Karman’s nonlinear strain displacement relations. The governing equations of the PFGS plate are derived using the principle of virtual work. The direct iterative method and Newmark’s integration technique are espoused to solve nonlinear mathematical relations. The influences of the porosity distributions and porosity parameter indices on the nonlinear frequency responses of the PFGS plate for different skew angles are studied in various parameters. The effects of volume fraction grading index and skew angle on the plate’s nonlinear dynamic responses for various porosity distributions are illustrated in detail.     

伞盘结构对大长径比发动机药柱结构完整性的影响

为了提高大长径比发动机药柱结构完整性水平,基于三维黏弹性有限元法,计算某大长径比固体发动机在温度和内压荷载联合作用下的结构响应;研究伞盘结构及其位置对药柱最大Von Mises应变的影响规律;讨论当伞盘位于药柱中部时,伞盘最大Von Mises应变随伞盘宽度、深度以及顶部圆弧半径比的变化规律。结果表明,伞盘位于药柱中部时可以有效地降低大长径比药柱的最大Von Mises应变,增加伞盘宽度、深度或选取合适的半径比均可降低伞盘结构的最大Von Mises应变。所得结论可为固体发动机设计提供参考。     

基于SPRT的组合导航故障检测与隔离互辅算法

针对SPRT(序贯概率比检验)算法无法准确判断缓变故障结束时间的问题,提出了一种故障检测与隔离互辅算法。采用SPRT算法对滤波残差进行故障检测,确认故障后隔离故障观测量,重新建立卡尔曼滤波观测方程并完成量测更新,将隔离后的滤波结果作为下一时刻的滤波初值辅助故障检测。仿真结果表明,该方法能准确定位故障观测量并判断出故障的结束时间,提高了系统可靠性。     

气液同轴式喷嘴缩进比对雾化细度影响的实验

缩进比是液体火箭发动机气液同轴式喷嘴设计中一个重要参数。本文对缩进比对喷嘴雾化特性的影响进行了实验研究。结果表明;在不同工作参数下不同缩进比的喷嘴,其雾化特性有一定的差别。缩进比对雾化细度的影响不如其对雾化的流强和混合比分布及噪声等的影响明显。在气侧压降较小时,缩进比过大过小都不利于雾化;而在气侧压降较大时,缩进比较大或较小都会对雾化有一定的改善。但当缩进比过大时,气液之间的相互作用会使得液体喷注压降明显地波动。     

一种基于程序域边界分析的测试方法

边界附近的点对程序故障更加敏感.针对这一特征,提出了一种基于程序域边界分析的测试方法.从被测程序本身出发,进行定义域确定及子域划分,分析定义域边界和子域边界,并跟据其边界测试点产生测试用例,以检测域边界附近的处理.实验表明对定义域边界及其子域边界进行测试,可有效地提高故障覆盖率.     

The “signature” of a coherent system and its application to comparisons among systems

Various methods and criteria for comparing coherent systems are discussed. Theoretical results are derived for comparing systems of a given order when components are assumed to have independent and identically distributed lifetimes. All comparisons rely on the representation of a system's lifetime distribution as a function of the system's “signature,” that is, as a function of the vector p= (p₁, … , p_n), where p_i is the probability that the system fails upon the occurrence of the ith component failure. Sufficient conditions are provided for the lifetime of one system to be larger than that of another system in three different senses: stochastic ordering, hazard rate ordering, and likelihood ratio ordering. Further, a new preservation theorem for hazard rate ordering is established. In the final section, the notion of system signature is used to examine a recently published conjecture regarding componentwise and systemwise redundancy. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 507–523, 1999     

导弹静电放电效应及其防护装置应用研究

静电防护是导弹研制的刚性要求.简述了导弹发生静电荷沉积的主要途径,介绍了导弹静电放电的3种典型形式,基于相关典型试验和实测数据,分析了静电放电电流效应和静电放电电磁脉冲效应对导弹可感测辐射信号和系统信噪比的不同作用效能,研究了导弹安装静电放电器前后对安全性和功能性能的影响,介绍了静电放电器的典型应用方式,综合论证了导弹...     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

高超声速变形飞行器翼面变形模式分析

为提高高超声速翼身组合式飞行器的射程,研究了采用不同翼面变形模式时,飞行器在马赫数3~8内的气动特性和翼面效率。针对典型的轴对称翼身组合式外形,采用Navier-Stokes方程进行数值模拟,对伸缩、变后掠和二维折叠三种变形模式下的外形在超声速及高超声速来流条件下进行模拟,并对升阻比、翼面单位面积升阻比和操稳特性进行分析。结果表明:在超声速及高超声速范围内,变后掠变形模式在宽速域内升阻比提高明显,同时具备优良的翼面效率及操稳特性,其在马赫数3~8范围内具有最优的综合性能。研究成果能对高超声速翼身组合式变形飞行器布局设计提供参考,具有一定的指导意义。     

利用复单脉冲比的平面阵列雷达群目标检测方法

针对平面阵列雷达群目标检测问题,以矩形阵为例,详细分析方位向和俯仰向复单脉冲比虚部的统计特性;建立平面阵列雷达群目标检测模型,根据恒虚警检测原理推导复单脉冲比虚部的椭圆判决域,并利用复单脉冲比实部辅助判决,综合提出基于复单脉冲比的平面阵列雷达群目标检测算法。针对双目标情形进行仿真实验,结果表明:在较高信噪比、较大角度间隔以及幅度相当且相位差较大的条件下算法能够有效检测群目标。