基于动力学模型的柔性加工设备机电系统状态监测与故障预警

在建立的加工设备机电系统精确动力学模型及对模型参数实时辨识的基础上［１］，建立柔性加工设备机电系统的状态监测模型，包括ＢＡＹＥＳ故障检测、突发故障检测及故障分析与定位等；同时利用Ｋｕｌ－ｂａｃｋ信息距离和多层递阶ＡＲ模型实现系统的状态与故障预警。在加工设备上的实验表明模型可行有效，它能排除柔性多变工况、时变性及随机干扰对监测与预警功能的影响，提高其鲁棒性和自适应能力。     

物伞系统动力特性研究

研究了降落伞一物体系统的空间运动。假定降落伞和物体都有６个自由度，两者通过吊带连接起来。推导了物伞系统运动的非线性微分方程，运动方程中没有考虑伞绳和吊带的弹性。用所得数学模型分析了减速伞回收系统的动力特性，给出了仿真计算结果。     

发射药的分解机理及其安定性研究

在研究发射药中硝酸酯的分解机理及其与发射药安定性关系的基础上,分析了热分解,水解和自动催化作用对发射药安定性的影响,以色谱法和粘度法等实验手段探索发射药安定性的变化规律,通过不同温度下发射药老化过程的动力学研究,提出了确定发射药安全使用寿命的可靠方法。     

单质炸药和样品混合炸药热分解反应动力学参数的研究

本文用差示扫描量热仪(DSC7)测得了几种单质炸药和样品混合炸药的非等温DSC曲线,对热分解反应速率方程进行了研究,编制了由一条非等温DSC曲线的信息计算炸药热分解反应动力学参数的程序,并证明DSC的线性升温速率对动力学参数没有明显影响。     

多GPU的可压缩湍流并行计算

利用CUDA Fortran语言发展了一种基于GPU的计算流体力学可压缩湍流求解器。该求解器基于结构网格有限体积法,空间离散采用AUSMPW 格式,湍流模型为k-ω SST两方程模型,采用MPI实现并行计算。针对最新的GPU架构,讨论了通量计算的优化方法及GPU计算与PCIe数据传输、MPI通信重叠的多GPU并行算法。进行了超声速进气道及空天飞机等算例的数值模拟以验证GPU在大网格量情况下的加速性能。计算结果表明相对于Intel Xeon E5-2670 CPU单一核心的计算时间,单块NVIDIA GTX Titan Black GPU可获得107至125倍的加速比。利用四块GPU实现了复杂外形1.34亿网格的快速计算,并行效率为91.6%。     

Analysis of the effect of bore centerline on projectile exit conditions in small arms

Most finite element models of small arms focus on an idealized barrel, typically one with a perfectly straight bore centerline. Using five different experimentally measured bore centerlines, this investigation analyzes the effect centerline nonlinearity has on projectile exit conditions. This includes the effect of rotating a centerline through several orientations. Modeled using Abaqus/Explicit, this dynamic analysis simulates a single firing cycle for each centerline. Projectile jump is calculated for each model as a measure of the effects of warped centerlines. The warped centerlines have a small effect on barrel dynamics.     

The investigation of NTO/HMX-based plastic-bonded explosives and its safety performance

3-nitro-1,2,4-triazol-5-one (NTO) is the main component of insensitive munitions (IM) formulation because of its outstanding insensitive properties.In this paper,a series of NTO/HMX-based composite explosives were prepared and characterized.The study focuses on the effect of NTO on the performance of the formulations,especially the safety performance.The results revealed that the mechanical sensi-tivity of formulations was associated with NTO content,as well as the thermal conductivity,specific heat capacity and Arrhenius parameters.Then,the high amount of NTO using in formulation was proved to be helpful for NTO/HMX-based formulation to exhibit good thermal safety.Besides,by accelerating rate calorimeter (ARC) and a modified cook-offequipment,the pressure and pressure rise rate were proved as the important indicator for judging the thermal safety performance in confined spaces.Finally,the numerical simulation was used as a credible method for predicting the respond temperature of cook-off experiment.     

Dynamic analysis of a guided projectile during engraving process

The reliability of the electronic components inside a guided projectile is highly affected by the launch dynamics of guided projectile. The engraving process plays a crucial role on determining the ballistic performance and projectile stability. This paper analyzes the dynamic response of a guided projectile during the engraving process. By considering the projectile center of gravity moving during the engraving process, a dynamics model is established with the coupling of interior ballistic equations. The results detail the stress situation of a guided projectile band during its engraving process. Meanwhile, the axial dynamic response of projectile in the several milliseconds following the engraving process is also researched. To further explore how the different performance of the engraving band can affect the dynamics of guided projectile, this paper focuses on these two aspects: (a) the effects caused by the different band geometry; and (b) the effects caused by different band materials. The time domain and frequency domain responses show that the dynamics of the projectile are quite sensitive to the engraving band width. A material with a small modulus of elasticity is more stable than one with a high modulus of elasticity.     

基于效果的炮兵行动C2系统动力学建模与仿真

一体化联合作战参战军兵种多、指挥控制(C2)与协调复杂。围绕炮兵行动特点要求,运用系统动力学理论建立联合作战炮兵行动指挥控制的系统动力学模型,研究常规打击和基于效果作战两种指挥控制模式下炮兵行动所产生的不同结果及其原因,并给合作战想定仿真验证,得出较为可靠的结论,为解决联合作战炮兵行动精确指挥控制与协调提供一种有效途径     

基于车辆稳态动力学特性的汽车动态轨迹规划

针对高动态环境下驾驶辅助系统（ADAS）的轨迹规划问题,提出基于车辆稳态动力学特性的动态轨迹规划算法。该算法首先在交通车轨迹预估基础上建立搜索空间,接着利用车辆稳态动力学模型作为轨迹发生器,在搜索空间中对轨迹发生器产生的轨迹进行评价,最后根据驾驶意图和优化条件选择最优轨迹。文章采用基于最优加速度预瞄理论的轨迹跟踪算法,建立了七自由度车辆动力学模型,并在Simulink环境下搭建仿真平台,进行超车仿真实验。实验结果表明,本文提出的算法可行、有效。