大功率IGBT器件及其组合多时间尺度动力学表征研究综述

在提出电力电子器件及其组合多时间尺度动力学表征需求的前提下,以目前常用的全控型电力电子器件——绝缘栅双极晶体管(Insulated Gate Bipolar Transistor,IGBT)为例,系统分析并归纳了目前在IGBT及其组合多时间尺度动力学表征研究方面的进展和成果,包括作为基础的大功率IGBT及其组合多时间尺度电热瞬态建模方法、基于模型的大功率IGBT模块失效量化表征方法以及用于辅助分析的IGBT组合多速率仿真方法。此外,介绍了基于IGBT多时间尺度模型的装置应用设计案例。从建模方法、可靠性评估、仿真手段以及应用设计四个方面系统全面地阐述了大功率IGBT及其组合多时间尺度的动力学表征方法,可为电力电子混杂系统的精确设计提供电力电子器件层面的理论和技术支撑。     

信息知识库中的数据可用性恢复策略

信息知识库在工业生产中能够提高生产效率、降低资源消耗,但数据失效频率高。针对多节点失效重构的纠删码策略较少,且未充分考虑失效数据重构时各参与节点间的链路关系,导致重构效率较低。针对信息知识库数据失效,提出一种新的重构策略。根据节点的数据处理能力,选取数据处理能力最高的新生节点为路由节点;依据路由节点与候选供应节点及剩余空闲节点的链路带宽,确定供应节点及新生节点,从而构建数据重构网络拓扑,提高失效数据重构效率。实验结果证实,与传统纠删码策略性能比较,该方法有较短的重构时间和较高的重构成功率。     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

某压力容器壳体水压爆裂原因分析

针对某压力容器壳体生产过程中出现的水压试验异常爆裂问题,通过材料成分、热处理组织、力学性能、宏观和微观断口分析,确定了裂源位置、裂纹缺陷性质、产生原因及断裂机理;通过断裂力学分析,确定了水压爆裂的原因。提出了淬火工艺改进建议和防范措施。     

统计模型在火灾统计中的应用

通过分析已有的火灾统计数据,建立了简单的二元线性回归模型,并对此模型进行了显著性检验。分析表明违规操作和电气故障是群死群伤火灾的主要因素。可以利用此模型分析火灾统计中不同形式的数据,并进一步说明统计模型在火灾统计中的作用。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于MSP430单片机的海浪水压场自动测量系统

提出了基于MSP430单片机的水压场自动测量系统的设计方案和实现方法并进行了实际测量.解决了自动测量系统中的低噪声、低功耗、高分辨率、大容量存储等关键技术.实验结果表明:该系统具有自动运行、电池供电、记录时间长等特点.适于高海况条件下的海浪水压场的测量.     

高精度气压源的Fuzzy-PID控制研究

设计了Fuzzy-PID双模控制器并应用到高精度气源压力控制系统中.试验表明,单纯采用PID控制的高精度气源压力控制系统具有精度高的优点,但不适应系统参数的变化.Fuzzy-PID双模控制器具有响应速度快、稳态误差小、鲁棒性强的优点.通过试验比较了传统PID、Fuzzy控制和Fuzzy-PID双模控制3种控制策略,试验结果表明,Fuzzy-PID双模控制器综合了Fuzzy控制和PID控制的优点,适用于高精度气源压力控制系统.     

节点非独立失效下的局域网可靠性建模与分析

以具有层次结构的局域网作为拓扑模型,考虑共因失效和关联失效这2类节点非独立失效事件发生的情况,建立了交换机节点失效模型来模拟交换机失效,利用Monte-Carlo仿真算法近似计算出网络的两端可靠性,研究2种共因失效事件和3种关联失效事件对网络端端可靠性的影响。结果表明:因资源节点出现故障和协议层出现错误而导致交换机失效的共因失效事件均会降低网络可靠性,且资源节点失效概率或协议层失效概率越大,网络可靠性越低;而由于使用了热备份技术、堆叠技术以及发生广播风暴导致的关联失效事件,即使节点独立失效概率很小,只要相关因数足够大,故障都会快速传播,导致网络可靠性迅速下降。     

Theoretical study of an energetic material di-1H-1,3,4-triazole derivatives

Computations by density functional theory (DFT) method are performed on a series of di-1H-1,3,4-triazole derivatives with different substituents and linkages. The heat of formation (HOF) is predicted by the designed isodesmic reactions. The predicted results reveal that –N₃ and –NN– groups are effective structural units for increasing the HOF values of the di-1H-1,3,4-triazole derivatives. The HOMO–LUMO gap is affected by the substituents and linkage groups. Detonation performance is evaluated using the Kamlet–Jacobs approach based on the calculated density and HOF. The results indicate that –NO₂, –NF₂, –NH–, –NH–NH– and –NN– groups are helpful for enhancing the detonation properties of di-1H-1,3,4-triazole derivatives. The bond dissociation energy and bond order of the weakest bonds are analyzed to investigate their stability. It is observed that the –CH₂–, –CH₂–CH₂– and –CHCH– groups are effective structural units for improving the stabilities of these derivatives. Considering the detonation performance and the stability, five compounds are screened as the potential candidates for high energy density materials.