采用自适应简化不确定性卡尔曼滤波算法的飞行器导航控制方案

针对飞行器绕本体轴高速旋转的飞行过程出现的严重耦合干扰问题和大角加速度和大角速度测量问题,提出了一种自适应简化不确定性卡尔曼滤波算法。该算法使用超球面分布采样点和线性转移等方法简化算法采样计算和采样点的权值计算,提高算法效率;利用模型噪声和线性方程,通过一步预测进行自适应设计,计算滤波值和误差方差矩阵;使用次优噪声估计器推算过程噪声;对过程噪声进行正定判定,防止算法发散。仿真结果表明,这一改进的自适应简化不确定性卡尔曼滤波算法能够有效减少滚转角解算误差和耦合干扰,提高飞行器着陆点的精度。     

熵权正负理想方案灰色关联法的对地攻击目标选择

针对攻击机对地攻击的目标选择问题,提出了目标攻击优先权的计算方法,将正负理想方案与灰色关联分析方法进行融合并引进熵权的思想为各项优先权赋值,避免了权值确定过于主观的问题,提出了一种目标选择的模型,为飞行员对地攻击目标选择提供了辅助决策,具有较高的实用性。仿真结果也说明了该方法的合理性。     

对调频斜率极性捷变SAR欠采样转发干扰

针对传统欺骗干扰难以对调频斜率极性捷变SAR（chirp rate polarity jittered SAR, CRPJ-SAR）形成有效干扰，研究了对CRPJ-SAR欠采样转发干扰。通过建立CRPJ-SAR有限时长欠采样转发干扰信号模型，分析了欠采样转发干扰对CRPJ-SAR的干扰效果。给出假目标数目、位置以及幅度的理论计算公式。在此基础上讨论了欠采样周期对干扰效果的影响。利用数字仿真验证了理论分析的正确性。     

农村文化建设对农村社会稳定的双向效应

社会稳定是改革发展的重要前提,而保持农村稳定是全社会稳定的关键。维护农村社会稳定根本途径在于文化建设,但文化建设对农村社会稳定有双向效应。文化建设对农村社会稳定的正面效应有减贫效应、社会结构优化效应、社会控制效应、社会心理优化效应和社会化效应,而文化建设的受益不均衡效应、虚化效应、过度社会动员效应及其信息失稳效应等又不利于农村社会稳定。因此,要充分重视农村文化建设的积极作用,也要清醒认识其负面效应,并为维护农村社会稳定考虑扬正抑负的对策。     

市场经济与军人思想观念形成的关联分析及对策

市场经济与军人思想观念的形成存在正相关,因为市场经济强化了军人的公平竞争意识、效率意识、创新意识、法制意识、诚信意识;市场经济与军人思想观念形成也存在负相关,导致某些军人理想信念淡化、过分追求个人享受、一切向钱看,使其个人主义、自由主义思想膨胀。为切实加强部队思想建设和提高部队战斗力,必须采取相应的对策。     

多功能雷达建模中的雷达字提取技术研究

雷达字为有限数目脉冲的固定排列,能够反映多功能雷达的工作状态和威胁等级。针对漏脉冲和虚假脉冲所造成的雷达字不能正确提取的问题,提出了一种基于三级匹配的雷达字提取算法。该算法首先对分选后的辐射源脉冲列进行数据库级的匹配过滤,确定模板雷达范围,然后分别利用脉冲配对和序列相关技术进行精确识别。仿真实验表明,该方法不仅能提取多功能雷达辐射源的雷达字,而且对噪声环境具有较好的适应能力。     

When are observed failures more informative than observed survivals?

A framework involving independent competing risks permits observing failures due to a specific cause and failures due to a competing cause, which constitute survival times from the cause of primary interest. Is observing more failures more informative than observing survivals? Intuitively, due to the definitiveness of failures, the answer seems to be the former. However, it has been shown before that this intuition holds when estimating the mean but not the failure rate of the exponential model with a gamma prior distribution for the failure rate. In this article, we address this question at a more general level. We show that for a certain class of distributions failures can be more informative than survivals for prediction of life length and vice versa for some others. We also show that for a large class of lifetime models, failure is less informative than survival for estimating the proportional hazards parameter with gamma, Jeffreys, and uniform priors. We further show that, for this class of lifetime models, on average, failure is more informative than survival for parameter estimation and for prediction. These results imply that the inferential purpose and properties of the lifetime distribution are germane for conducting life tests. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

装药长径比对EFP成型作用效果影响分析

针对装药长径比对EFP成型的影响,基于一种球缺型药型罩EFP,利用ANSYS／LS-DYNA仿真软件对其成型过程进行建模仿真,研究EFP成型过程及其各项参数．在该基础上,改变装药高度得到不同的装药长径比数据,并对不同长径比EFP形成过程进行仿真,得到不同装药长径比EFP的速度、速度增长率及炸药能量利用率等数据,为选择最佳装药长径比提供依据．     

基于删除平均的VI-CFAR检测器

针对MLVI-CFAR检测器在多个随机分布干扰目标背景下检测性能不好,以及OSVI-CFAR检测器在均匀环境和仅单滑窗存在干扰目标的环境下检测性能欠佳问题,提出了一种基于删除平均(CML)的VI-CFAR检测器(CMLVI-CFAR).仿真验证了CMLVI-CFAR检测器在均匀背景及多目标干扰环境下,都具有比MLVI和OSVI-CFAR检测器好的检测性能,并且其在杂波边缘背景下的虚警控制能力与前两者也基本一致,说明其在实际杂波环境中具有更强的鲁棒性和良好的应用潜力.     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.