高速布放的微型海光缆下沉状态研究

研究了高速布放的微型海光缆(SFOMC)的下沉状态,分析了洋流、微缆外径、微缆单位长水中重力以及布放速度对下沉状态的影响.计算机仿真结果表明,上升流是影响SFOMC下沉状态的决定性因素,在选择路由时,一定要避开有上升流的海域,同时要加快下沉速度,还应尽量选用外径较小的SFOMC;而下沉速度受SFOMC的单位长水中重力的影响不大,没有必要设计制造大重力的单位长水中重力的SFOMC,且下沉速度与布放平台的航行速度无关.     

纤维增强SiO2气凝胶隔热复合材料的制备及其性能

将无机陶瓷纤维与SiO2溶胶混合,经超临界干燥制备了SiO2气凝胶隔热复合材料。SiO2气凝胶纤细的骨架颗粒减少了固态热传导,纳米级孔减少了气体热传导和对流传热,同时无机陶瓷纤维减少了辐射传热。SiO2气凝胶复合材料具有良好的隔热性能,其200℃和800℃的热导率分别为0.017W/m.K和0.042W/m.K。纤维的加入提供了力学支撑,高温处理增强了气凝胶骨架强度,材料在常温和高温下均具有良好的力学性能,其常温的拉伸、弯曲和抗压强度分别为1.44MPa、1.31MPa和0.98MPa(10%应变),800℃的拉伸、弯曲和抗压强度分别为1.95MPa、1.80MPa和1.42MPa(10%应变)。     

深海潜水器ARV关键技术

较为详细地介绍了一种全新概念的深海潜水器(ARV),此潜水器综合了自治水下机器人(AUV)和遥控水下机器人(ROV)的各自优势,既可以像AUV一样依靠预设指令进行自主巡航,又可以像ROV一样,通过水面视频画面控制进行精细作业。其最大的特点是用微细光缆代替了传统的脐带电缆,使ARV更具远距离、大深度、实时操作、机动灵活等特点。介绍了其系统组成、关键技术和国内外发展水平及其发展的重要意义。     

Dynamic modeling and parameter identification of a gun saddle ring

In this study, a theoretical nonlinear dynamic model was established for a saddle ring based on a dynamic force analysis of the launching process and the structure according to contact-impact theory. The ADAMS software was used to build a parameterized dynamic model of the saddle ring. A parameter identification method for the ring was proposed based on the particle swarm optimization algorithm. A loading test was designed and performed several times at different elevation angles. The response histories of the saddle ring with different loads were then obtained. The parameters of the saddle ring dynamic model were identified from statistics generated at a 50° elevation angle to verify the feasibility and accuracy of the proposed method. The actual loading history of the ring at a 70° elevation angle was taken as the model input. The response histories of the ring under these working conditions were obtained through a simulation. The simulation results agreed with the actual response. Thus, the effectiveness and applicability of the proposed dynamic model were verified, and it provides an effective method for modeling saddle rings.     

Synergistic effect of hybrid Himalayan Nettle/Bauhinia-vahlii fibers on physico-mechanical and sliding wear properties of epoxy composites

The cellulosic bast fibers are recognized as a justifiable and biodegradable substitute for producing moderate strength polymer composite materials because of their characteristics of renewability, eco-friendliness, and higher specific strength. Hence the aim of this research work is to fabricate Himalayan bast fibers (Nettle fiber (NF)/bauhinia vahlii fiber (BF)) based mono/hybrid epoxy composites at varying weight percentage of 2–6 wt% and evaluate the physical (void fraction and water absorption), mechanical (tensile strength, flexural strength, hardness) and sliding wear properties of as-fabricated composites. The 6 wt% NBF reinforced composites exhibited higher mechanical properties as compared to NF and BF composites with tensile strength of 34.04 MPa, flexural strength of 42.45 MPa, and hardness of 37.01 H_v respectively. The influence of various control factors (sliding velocity, NF/BF/NBF contents, normal load and sliding distance) on specific sliding wear rate of composites was evaluated by Taguchi (three factors at three levels) experimental design and the percentage contribution of these selected parameters on sliding wear performance was examined by Analysis of variance (ANOVA). The sliding wear property of as-developed composites was found to be greatly influenced by sliding velocity and the wear resistance was observed to be improved with the NF/BF/NBF contents. The wear mechanism of the as-fabricated composites has been elucidated by scanning electron microscopy analysis. The research outcomes demonstrated that the hybridization of Bauhinia vahlii fiber with Nettle fiber led to improve the mechanical and wear properties of epoxy composites.     

激光陀螺捷联惯导系统元件误差自标定技术

通过设计一种实用的激光陀螺捷联惯性导航系统自标定算法,保证在外场使用情况下,能对惯性器件误差(三个陀螺漂移和三个加速度计零位)进行精确标定,确保系统长期使用精度.在完成算法设计的基础上,进行了仿真计算,取得满意的仿真结果.     

一种用于光纤陀螺光源的新型ATC系统设计

针对光纤陀螺的光源对ATC的基本要求,给出了造成谐振腔温度变化的因素,对LD的帕尔贴制冷原理和传统ATC的工作过程给出了详细的数学分析,建立了LD光源的ATC数学模型;根据系统在高频和低频干扰下的仿真结果,进行了系统参数优化和改进,设计了一种新型的高精度、双向调节ATC系统,在降低功耗的同时大大减小了光源驱动电路的散热和体积,实现了光源驱动电路的高精度、低功耗和小型化.在-30℃~30℃范围内的实际测试数据显示该系统较传统ATC精度提高了一个数量级,达到了0.1%,温度控制精度达到0.1℃,该系统对于光纤陀螺精度的提高和其它半导体激光器的温控研制有着重要的参考价值.     

黏结剂和纤维对石蜡微胶囊保温砂浆抗裂性影响

采用黏结剂增强石蜡微胶囊保温砂浆内部微粒间的结合力,分析了黏结剂类型和掺量对石蜡微胶囊保温砂浆抗折强度、黏结强度和韧性的影响;采用纤维增韧技术提高保温砂浆的抗裂能力,分析了纤维类型和掺量对石蜡微胶囊保温砂浆力学性能和抗裂性能的影响;确定了配制石蜡微胶囊保温砂浆使用乙烯—乙酸乙烯酯共聚乳胶粉黏结剂和聚丙烯纤维,其最佳掺量...     

多波长主动式相干合成中光程差对合成效果的影响

为了对多波长激光主动式相干合成做出初步的理论描述,揭示影响合成效果的关键因素,根据相干合成的基本原理,建立了计算模型.并以9波长7路相干合成系统为实例,仿真计算了光程差取不同值的情况下,各频率成分的合成效果和总体合成效果.当各路间存在较大的光程差时,只有中心频率成分实现了相干相长,其他频率成分处于"混乱"状态,总体合成...     

光子晶体光纤的空气孔膨胀和拉锥技术研究

光子晶体光纤的空气孔膨胀和拉锥技术是一种有效的改变光纤结构参数的技术手段.空气孔膨胀可以改变空气孔的填充比例,即改变空气孔直径和孔间距的大小,光纤拉锥可在保持空气孔直径和孔间距比例不变的情况下改变纤芯的大小.光子晶体光纤结构参数的可控性改变可实现一些特殊光子晶体光纤器件的制作,对进一步实现和挖掘光子晶体光纤的潜在应用价...