色噪声环境下MIMO雷达相干目标角度估计算法

针对色噪声环境下的MIMO雷达相干目标角度估计问题,提出一种基于目标信息矢量重构的角度估计算法.算法对MIMO雷达的接收数据进行了低复杂度改进,通过计算四阶累积量,得到一组矢量并证明该矢量包含所有目标的角度信息,通过重构Toeplitz矩阵,结合MUSIC算法实现了色噪声环境下MIMO雷达相干目标的角度估计.算法保留了MIMO雷达的阵元扩展能力和目标分辨力,具有自动抑制加性高斯白噪声和色噪声的能力,实现了相干目标的有效估计,更利于在实际中应用.最后计算机仿真结果证实了算法的有效性和可行性.     

命中角对防护结构口部爆炸毁伤影响的数值分析

为研究装药命中角对防护结构口部爆炸毁伤的影响规律,对直墙拱结构进行了一系列爆炸模拟分析,得到了直墙拱结构拱顶、拱脚和直墙底3个位置的爆炸应力和位移时程曲线。通过分析这3个位置的应力峰值和位移峰值,发现随着装药命中角的增大,拱顶处竖直方向荷载减小,而拱脚处水平方向荷载增大;随着装药命中角的增大,拱顶处竖直方向位移变形减小,而拱脚处水平方向位移变形增大。模拟分析得到的命中角对防护结构口部爆炸毁伤的影响规律,可供防护工程设计时参考。     

相控阵雷达外场试验目标模拟技术

针对传统雷达回波模拟技术模拟目标态势单一、建设成本高、灵活性差等缺陷,结合相控阵雷达快速波束定向的扫描特点,提出了一种基于射频存储转发技术和移动阵列平台的相控阵雷达外场试验目标模拟方法。该方法采用射频空间辐射注入的方式为雷达提供较为逼真的三维空间模拟目标回波信号和构建较为复杂的模拟目标场景态势,能够支持包括雷达天线在内的整个雷达系统进行模拟试验或训练。最后通过实例仿真验证了该方法的有效性和可实现性。     

Quantification of projection angle in fragment generator warhead

Tactical Ballistic Missile (TBM) class target neutralization by the fragment spray of a Fragment Generator Warhead (FGW) calls for quantification of fragment projection angle scatter to finalize the end game engagement logic. For conventional axi-symmetric warhead, dispersion is assumed to be normal with a standard deviation of 3⁰. However, such information is not available in case of FGW. Hence, a set of experiments are conducted to determine the dispersion of fragments. The experiments are conducted with a specific configuration of FGW in an identical arena to quantify the scatter and then verified its applicability to other configurations having a range of L/D and C/M ratios, and contoured fragmenting discs. From the experimental study, it is concluded that the scatter in projection angle follows normal distribution with a standard deviation of 0.75° at Chi-square significance level of 0.01(χ²_0.99).     

悬浮固相颗粒对储集层基质孔隙的堵塞规律研究

应用胜利油区8个不同区块的岩心及注入水,采用岩心流动实验手段,研究了注入水中悬浮颗粒对储层孔隙的堵塞特征,发现悬浮颗粒对储层的堵塞特征表现为孔隙逐步堵塞和迅速堵塞两种类型;悬浮颗粒浓度低且孔径与粒径的比值较大时易形成孔隙避步堵塞;悬浮颗粒浓度大或孔径与粒径的比值较小时易形成迅速堵塞;悬浮颗粒对储层的堵塞程度、堵塞类型是颗粒浓度、颗粒粒径与储层孔喉匹配综合作用的结果;迅速堵塞特征的初始堵塞效果主要取决于孔径与粒径的匹配关系,最终堵塞效果主要与注入水中的颗粒浓度有关;高浓度的小颗粒对孔隙基质的堵塞特征表现为迅速堵塞。     

固体火箭发动机二次喷射控制矢量喷管流场仿真

采用基于Favre平均的三维N-S方程和k-ε湍流模型对固体火箭发动机二次喷射推力矢量喷管复杂干扰内流场进行数值模拟。空间上采用三阶精度差分格式进行求解,时间上采用隐式Jacobi点迭代方法进行迭代推进,直至流场收敛。数值模拟得到矢量喷管二次射流的激波系结构,以及复杂的主/次流干扰流动图像。二次喷射流场包含复杂的涡系结构和波系结构,还存在着边界层与激波的相互干扰、自由剪切层、激波、膨胀波和大尺寸分离。数值模拟还表明,高温燃气射流导致喷射孔附近喷管壁面处的温度相当高,需采取相应的热防护措施。     

Integrating decisions with advance supply information in an assemble-to-order system

We study a periodic-review assemble-to-order (ATO) system with multiple components and multiple products, in which the inventory replenishment for each component follows an independent base-stock policy and stochastic product demands are satisfied according to a First-Come-First-Served rule. We assume that the replenishment for various component suffers from lead time uncertainty. However, the decision maker has the so-called advance supply information (ASI) associated with the lead times and thus can take advantage of the information for system optimization. We propose a multistage stochastic integer program that incorporates ASI to address the joint optimization of inventory replenishment and component allocation. The optimal base-stock policy for the inventory replenishment is determined using the sample average approximation algorithm. Also, we provide a modified order-based component allocation (MOBCA) heuristic for the component allocation. We additionally consider a special case of the variable lead times where the resulting two-stage stochastic programming model can be characterized as a single-scenario case of the proposed multistage model. We carry out extensive computational studies to quantify the benefits of integrating ASI into joint optimization and to explore the possibility of employing the two-stage model as a relatively efficient approximation scheme for the multistage model.     

飞机反区速度矢量不稳定及其控制的机理

在信号流图的基础上,提出多回路分析的方法,并用于研究反区时速度矢量不稳定及其稳定控制的机理。建立了纵向动力学的信号流图,并证明了一个回路的收敛性定理。在此基础上,通过理论分析得出了速度矢量不稳定在不同层面上的原因,也得出了速度和轨迹的发散度表达式等,并表明阻力-速度曲线、轨迹角-速度曲线、极曲线、阻力系数曲线等存在相互对应的反区和正区,并且阻力-速度曲线和轨迹角-速度曲线在斜率上成比例。研究得出进场动力补偿系统下速度矢量的稳定临界条件、收敛度、稳定机理等,理论分析和仿真比较了速度恒定进场动力补偿系统和迎角恒定进场动力补偿系统在控制性能上的差异。     

靴形喷油速率耦合预喷射对超高压共轨柴油机性能的影响

在介绍超高压共轨系统工作原理的基础上,基于GT-Power软件建立单缸超高压共轨柴油机的仿真模型,并利用试验验证模型的准确性,而后通过模型分析不同喷油速率、靴形喷油速率耦合不同预喷油量和靴形喷油速率耦合不同预喷提前角对超高压共轨柴油机动力性、经济性以及燃烧排放特性的影响。结果表明:通过调整超高压共轨系统中电控增压器电磁阀和喷油器电磁阀的开启时间,能够实现喷油速率的柔性可调。随着喷油速率从矩形变化到靴形,柴油机缸内压力、温度以及NO_x排放量均逐渐降低,而soot排放量逐渐升高,且靴形喷油速率可使柴油机获得最大的功率(扭矩)和最低的油耗率。靴形喷油速率耦合较小的预喷油量可以使柴油机获得更好的动力性、经济性和燃烧特性,但同时也会导致NO_x排放量的升高。靴形喷油速率耦合较大的预喷提前角有助于改善柴油机排放特性,但受到预喷油量的限制,效果并不明显。     

Optimal control policies for an inventory system with commitment lead time

We consider a firm which faces a Poisson customer demand and uses a base‐stock policy to replenish its inventories from an outside supplier with a fixed lead time. The firm can use a preorder strategy which allows the customers to place their orders before their actual need. The time from a customer's order until the date a product is actually needed is called commitment lead time. The firm pays a commitment cost which is strictly increasing and convex in the length of the commitment lead time. For such a system, we prove the optimality of bang‐bang and all‐or‐nothing policies for the commitment lead time and the base‐stock policy, respectively. We study the case where the commitment cost is linear in the length of the commitment lead time in detail. We show that there exists a unit commitment cost threshold which dictates the optimality of either a buy‐to‐order (BTO) or a buy‐to‐stock strategy. The unit commitment cost threshold is increasing in the unit holding and backordering costs and decreasing in the mean lead time demand. We determine the conditions on the unit commitment cost for profitability of the BTO strategy and study the case with a compound Poisson customer demand.