采用射流掺混增强的前可调面积涵道引射器数值模拟

为了提高风扇外涵和核心机驱动风扇级外涵流体的掺混效率，提出一种采用射流掺混增强的前可调面积引射器设计方案。通过数值模拟的手段对流量特性、流动掺混和总压损失等方面进行了研究，并同基准模型进行了对比分析，结果表明：采用波瓣混合器结构的前可调面积引射器设计，显著地增加了较高出口背压工况下风扇外涵的流通能力；新的设计方案不仅没有增加低出口背压工况下的总压损失，还减小了高背压出口工况下的流动损失；流向涡的特征尺度是提高掺混效率的关键，可以进一步优化波瓣混合器几何轮廓，以满足调节机构对结构设计的要求。     

Performance analysis of queue length monitoring of M/G/1 systems

This study investigates the statistical process control application for monitoring queue length data in M/G/1 systems. Specifically, we studied the average run length (ARL) characteristics of two different control charts for detecting changes in system utilization. First, the nL chart monitors the sums of successive queue length samples by subgrouping individual observations with sample size n. Next is the individual chart with a warning zone whose control scheme is specified by two pairs of parameters, (upper control limit, d_u) and (lower control limit, d_l), as proposed by Bhat and Rao (Oper Res 20 (1972) 955–966). We will present approaches to calculate ARL for the two types of control charts using the Markov chain formulation and also investigate the effects of parameters of the control charts to provide useful design guidelines for better performance. Extensive numerical results are included for illustration. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Analysis of decentralized multi‐product pull systems with lost sales

We study a pull‐type, flexible, multi‐product, and multi‐stage production/inventory system with decentralized two‐card kanban control policies. Each stage involves a processor and two buffers with finite target levels. Production stages, arranged in series, can process several product types one at a time. Transportation of semi‐finished parts from one stage to another is performed in fixed lot sizes. The exact analysis is mathematically intractable even for smaller systems. We present a robust approximation algorithm to model two‐card kanban systems with batch transfers under arbitrary complexity. The algorithm uses phase‐type modeling to find effective processing times and busy period analysis to identify delays among product types in resource contention. Our algorithm reduces the effort required for estimating performance measures by a considerable margin and resolves the state–space explosion problem of analytical approaches. Using this analytical tool, we present new findings for a better understanding of some tactical and operational issues. We show that flow of material in small procurement sizes smoothes flow of information within the system, but also necessitates more frequent shipments between stages, raising the risk of late delivery. Balancing the risk of information delays vis‐à‐vis shipment delays is critical for the success of two‐card kanban systems. Although product variety causes time wasted in setup operations, it also facilitates relatively short production cycles enabling processors to switch from one product type to another more rapidly. The latter point is crucial especially in high‐demand environments. Increasing production line size prevents quick response to customer demand, but it may improve system performance if the vendor lead‐time is long or subject to high variation. Finally, variability in transportation and processing times causes the most damage if it arises at stages closer to the customer. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

基于扩展Petri网的动态服务聚合流程描述模型及其BPEL4WS表示方法

针对现有服务聚合流程建模方法的不足,基于扩展Petri网提出了一种新的服务聚合流程/资源描述模型WSCP/R-net,有效解决了动态服务聚合流程模型中不确定路径选择和服务的动态变化性问题。给出了WSCP/R-net模型向BPEL4WS的转换算法,并以城市应急处理为例说明了转换算法的有效性。     

我国可再生能源的消防安全对策研究

可再生能源的开发和利用是保证我国整个能源战略顺利实施的必要条件之一。为确保国家能源战略调整战略顺利实施,以沼气为例研究可再生能源工程中存在的消防隐患,并据此提出增强沼气安全防范意识,增强沼气安全使用意识,提高沼气安全工程消防技术水平和健全沼气安全防范体系等对策。     

液化石油气火灾扑救中安全距离的确定

液化石油气由于易燃易爆的特性,在生产、储运和使用过程中极易引起火灾,甚至造成灾难性的爆炸事故,发生爆炸时威力又相当巨大,在扑救中确定安全距离是火场指挥人员必须要掌握的知识。通过对液化石油气物理和化学爆炸中燃烧物的燃烧半径的估算和抛出物的距离估算,分析确定液化石油气储罐火灾的安全扑救距离,供一线消防指挥人员参考。     

坦克火炮射击时舱室有害气体动态分析及评价

分析及评价坦克火炮射击时舱室内有害气体的变化。以某型坦克为试验样车,测定坦克火炮射击时舱室有害气体如:无机污染物、总悬浮颗粒物(TSP)及挥发性有机物(VOCs)浓度并观察其动态变化。测定出舱室主要有害气体以一氧化碳(CO)、二氧化硫(SO2)、氨(NH3)、TSP和总烃为主,有害气体浓度随发射炮弹数目的增加而升高,其中又以CO浓度最大。为加速坦克作业环境限值的国家军用标准的补充和修订提供依据。     

受限空间可燃气体爆炸抑爆实验系统研究

针对狭长受限空间可燃气体爆炸抑制模拟实验研究的需要,采用超细冷气溶胶抑爆技术设计了一套操作方便、组装灵活、结构合理的复合式气体爆炸抑制系统.完成气体爆炸和抑爆实验.实验表明该抑爆实验系统能满足受限空间不同工况气体爆炸抑爆实验研究的需要;同时也表明可燃气体浓度、抑爆剂性能、信号采集及控制系统响应速度等是影响抑爆效果的主要因素.文中的研究为进一步研制抑爆装置奠定了实验和理论基础.