坦克动力舱空气流动计算区域的网格生成

为了合理解决网格划分对坦克动力舱空气流动与传热三维数值计算效率和计算精度的影响,特提出动力舱空气流动计算区域的网格生成方法.对某型坦克动力舱的网格生成实例,显示了这种方法的实用性.     

改进类电磁算法在武器目标分配问题中的应用

通过基于级数的粒子编码变换方法,将武器目标分配问题的约束条件进行了化简.对原始类电磁算法,在种群初始化、局部搜索、合力计算以及粒子移动等各步骤对其进行改造,使之适应武器目标分配问题的整数解空间.最后通过数值实验验证了该改造后算法解决武器目标分配问题的有效性.     

坦克外壳对内部电磁波的影响及其振荡干扰波型的数值计算

在坦克的金属立方体盒子模型下,分析了坦克外壳对内部电磁波的影响,并对Lc型电路激发的电磁波在坦克内部形成的振荡波型进行了计算,分析了该类电磁振荡波对坦克内部其他电子元件产生电磁干扰的作用机理,对一种最低频率的谐振波型进行了仿真模拟,提供了对坦克内部电磁波电场分量及磁场分量的一种分析计算方法,为研究坦克内部电子设备的电磁干扰规律提供了思路,对提高坦克的电磁兼容性能具有一定参考意义。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

陶瓷/金属梯度热障涂层的制备及性能评价

为了评价陶瓷/金属梯度热障涂层的性能,设计了4种涂层方案和2种基体材料(1Cr18Ni9Ti和2Cr13).利用单枪单送粉器成功地制备了线性梯度涂层.通过观察涂层的微观结构、测量涂层的抗热震性能和热残余应力来评价涂层的性能.利用扫描电镜对各种陶瓷涂层的微观结构进行了观察和分析,利用X射线能谱分析得到了陶瓷梯度涂层试样中的不同区域的衍射图.热震试验表明,梯度涂层比非梯度涂层具有更好的抗热震性能.采用钻孔法对不同涂层方案进行了残余应力的测量,结果表明,压应力出现在1Cr18Ni9Ti基体材料上,而拉应力出现在2Cr13基体材料上.     

基于效能的舰艇电子对抗训练效果评估方法

摘 要：为解决舰艇电子对抗专业训练缺乏统一评估标准与方法体系等实际评估难题;采用系统分析方法结合舰艇电子对抗专业训练实际;研究提出了基于“任务要求分解”的作战效能量化指标体系构建方法、训练效果表达方法及实用评估指标体系、定量指标评估模型、评估标准等舰艇电子对抗训练效果评估方法体系;能够满足专业训练效果评估所需,对其它专业军事训练效果评估工作亦具有借鉴意义。     

电磁轨道炮电感梯度影响因素分析

利用Ansoft Maxwell 14.0有限元分析软件,在考虑和不考虑电枢2种情况下对简单电磁轨道炮电感梯度的影响作对比分析,得出计算电感梯度时有必要将电枢的影响考虑进去的结论.为提高增强型轨道炮的电感梯度,分析不同轨道间距、厚度以及不同炮口宽度对2种增强型轨道炮电感梯度的影响,得出电感梯度随轨道参数变化的规律.     

Experiment and simulation of launching process of a small-diameter steel cartridge case

In order to explore the rules of the deformation force during the launching of a small-diameter steel cartridge, the semi-closed bomb test method is used to test the greatest strains on chamber outer wall under the different chamber pressures. The pressure curves of cartridge chamber are measured in experiment, and the tensile test data of cartridge are loaded into the numerical calculation to compare with the experimental data. The conclusion was obtained that the calculated results match better with the experimental results by considering strain rate bilinear kinematic hardening material constitutive model. The forces on the various parts of the cartridge during launching and their deformation rules are achieved, in which the equivalent plastic strain decreases and the cylinder ring withstands the maximum equivalent stress when the cartridge case clings to the bore from the mouth to the bottom.