YHCAPP系统工艺信息提取和工序图生成技术研究

YHCAPP系统是面向中小企业的工具型CAPP系统,如何从CAD图形提取工艺信息和生成工序图是该类系统的一个难点。文中给出了一种基于表达式求值的方法,成功解决了该难题,实际应用表明该方法稳定可靠。该方法也为一般的工具型CAPP系统提供了新思路。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

大型相控阵雷达系统安全性综合评价

针对大型相控阵雷达系统安全性因素多、评价困难的特点，分析并建立了大型相控阵雷达系统安全评价指标体系。提出了一种基于改进模糊层次分析法、熵权法和拉格朗日算法确定综合权重的方法，并建立了雷达系统安全性模糊综合评价模型。以某型大型相控阵雷达系统的安全性评价为例，运用所提方法确定该雷达系统的安全性指标综合权重，并进行安全性综合评价。将该方法与传统AHP评价法进行对比分析，验证了该方法的科学性和合理性。     

H2O2/HTPB固液混合发动机点火试验研究

利用H2O2催化分解原理,设计了烃类燃料在催化分解的90%H2O2中能燃烧的点火器,然后采用该点火器进行H2O2/HTPB固液混合发动机点火试验研究.试验结果表明,该点火器能够成功启动H2O2/HTPB固液混合发动机,且当混合比偏离最佳混合比后,发动机的燃烧效率降低.     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

关于Chidume结果的推广

在一致光滑的Banach空间,证明了满足不等式‖Tx≤C ‖x‖的一类非线性强增生算子的Mann迭代序列强收敛于Tx=f的唯一解。     

ET:一种能耗有效的高性能嵌入式处理器

随着标准和算法的不断演进,高端嵌入式应用对性能和能耗提出了越来越高的要求.然而,能耗问题成为将VLSI潜力转换为实际应用需求的最大挑战,基于此,提出ET( Embedded Tera-scale Computing)处理器设计.ET以众多轻量级处理器(称为小核)来搭建目标处理器,每个小核都是一个基于显式数据和指令管理的...     

AHP法在舰空导弹作战通道分析中的应用

层次分析法(AHP)是一种简便、灵活而又实用的多准则决策的系统分析方法。运用该分析方法对舰空导弹武器各作战通道的性能进行综合分析,其中在对决策矩阵进行计算时,使用了三种不同的效用函数对方案层的各项指标进行了量化,最后得出了各作战通道的综合价值,此值可为指挥员决策提供参考。计算结果表明该方法用于作战通道评价是切实可行的。     

一种灰色模糊多属性决策模型

实际中的决策问题常常具有不确定性和灰色性。根据灰色系统和模糊数学的一些理论,同时考虑一个问题中的模糊性——隶属度与灰色性——灰度,将其综合起来表示为灰色模糊数的概念。在原有多属性决策(MADM)方法的基础上提出了一种灰色模糊多属性决策模型,并给出了模型的求解方法。待决策的各方案的排序是依据其到灰色模糊理想解的灰色模糊距离大小而进行的。     

发控车维修系统设计

发控车维修系统设计关键是建立发控车维修体系.介绍了现代发控车维修系统设计的要求、维修体系的建立、软硬件设计的方法.