多弯头管道磁致伸缩导波无损检测技术

为了研究超声导波在弯管中的传播特性及检测可行性,使用磁致伸缩导波仪器及传感器对多弯头管道进行了检测实验,并对弯管中导波的传播速度、模态转换、能量衰减等现象进行了探讨。结果表明:当弯管弯曲程度较小时,弯管中导波传播速度与直管中近似;弯管中导波存在明显的模态转换现象;弯管中导波能量随着时间近似呈指数形式衰减,且衰减规律与激励频率存在密切联系。该研究结果可以为复杂结构弯曲管道的导波检测提供参考。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

基于小波包分析的电磁导波信号缺陷识别

在钢管的电磁导波缺陷检测中,导波信号会不同程度地受到环境噪声污染。针对该问题,提出基于小波包系数区域相关分析的信号处理方法,通过对有缺陷与无缺陷情况的钢管电磁导波检测信号进行小波包分解重构、滤波和区域相关法对比分析,有效地解决了电磁导波检测中钢管缺陷的判别问题。     

线膛火炮身管剩余寿命的神经网络模型研究

利用前馈式人工神经网络方法,根据试验数据,建立了某火炮身管剩余寿命(RL)模型;并用该模型研究了各特征截面内径改变量对弹丸初速改变量的影响,以及弹丸初速改变量与总内径改变量间的关系。     

激光导向车 (LGV) 的实时姿态检测及控制

提出了一种通过实时检测激光导向车的姿态来控制其行驶的方法,该方法的基本原理是依据激光接收阵的信息先推导出车的瞬间姿态（以角度偏差α和距离偏差Ｄ表征）,然后对两驱动轮的速度进行控制;在新的模型车上的实验结果表明,这种方法明显提高了车的运行精度,可望用于实际的ＬＧＶ。     

火箭子母弹电子时间引信电路设计

为火箭子母弹定时开舱提供了一种性能先进的电子时间引信电路系统,阐述其电路组成、工作原理和功能,并分析了该电子时间引信系统的特点。     

自导车激光导引控制系统研究

本文提出一种用于柔性加工系统(FMS)的自动导向车(AGV)导引控制系统。该系统不仅能导引直线运行,而且能控制转弯。当自导车沿直线行驶时,它由设置在地面的气体激光器发出的激光束导引,由最优线性调节器控制;当自导车转弯时,它由三束激光和角锥棱镜检测位置和方向,由模糊控制器控制。实验表明该导引控制系统可行,它将使FMS的物流系统具有更高的柔性度。     

激光制导航空炸弹攻击区仿真计算

针对某型激光制导航空炸弹,进行了典型条件下的攻击区仿真计算,得出了几点结论。研究的方法和结论,可供研究激光制导武器参考,为进一步研究其它条件下投放激光制导武器的攻击区打下基础。     

中口径舰炮对空闭环校射

首先建立了中口径舰炮武器系统对空闭环校射数学模型,比较新颖地解决了波门指示、弹序判别、滤波方法、脱靶量的求取和预测以及漏测弹丸的措施等一系列问题,通过仿真模拟明显地提高了系统精度和命中率,并使其工程化嵌入某型航炮系统,在工程上得以实现     

旋转弹体高速入水水中弹道的模拟方法

针对旋转弹体高速入水特点,从弹体运动的动力学方程和相似理论出发,提出了模拟旋转弹体高速入水水中弹道的马赫相似实验方案.该方案在大气环境条件下,能够实现原型和模型两系统的主要相似准数相等.