基于HLA的防区外空面导弹攻防对抗仿真

针对HLA/RTI在接口规范、对象模型模板等关键技术建立分布式仿真平台的复杂性,提出了利用数字武器开发平台进行开发的方法,构建防区外空面导弹攻防对抗系统体系结构,实现了该体系结构联邦成员划分、设计联邦/仿真对象模型表等HLA仿真关键技术,并采用面向对象建模与仿真技术建立了各联邦成员的数学模型.该仿真结果表明,各联邦成员的数学模型与底层支撑环境能够相互分离,仿真模型具有良好的交互性和互操作性,可通过添加或删除联邦成员仿真不同的复杂战场想定,并可作为验证不同算例的仿真平台.     

形象记忆在数学学习中的应用

根据高中数学知识特点及学习方法,在数学概念、公式、定理等的教学中利用形象记忆,有助于学生正确理解基本概念,掌握公式和定理,并且可以培养学生的学习兴趣,提高数学学习的能力。在数学教学中利用形象记忆,也要注意使用方法和范围。     

轻量级SpaceFibre节点高速传输系统的优化设计

为满足卫星有效载荷间SpaceFibre链路的高带宽、高可靠性和轻量化的应用需求,提出一种SpaceFibre节点传输系统的优化设计。该设计采用基于帧累计的增量化计算方法减少了计算电路的冗余;通过四级流水架构满足了错误检测操作的时序要求,使用循环冗余校验共享机制平衡了硬件资源的使用;采取基于完整应答的双层控制策略提升了系统的可靠性,通过构建面向资源优化的控制状态机和存储架构简化了确认重传算法的实现逻辑。使用型号为XC7Z100FFG900-2的FPGA搭建双节点系统,板级验证表明:该设计满足协议规范,与同类设计方案相比,最高工作频率提高1.5倍,支持最高6.25 Gbit/s的传输速率,查找表资源和存储资源降低,寄存器资源相近,为开发具有自主知识产权的高速可靠SpaceFibre编解码器提供了参考。     

月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

节点实时性能自适应的集群资源分配算法

由于配置和所运行作业的不同,集群各节点的实时性能差异较大。为提高集群性能,提出节点实时性能自适应的集群资源分配算法 (node real-time performance adaptive cluster resource scheduling algorithm,NPARSA)。节点实时性能用其配置(CPU核数及速度、内存容量、磁盘容量)和实时状态参数(CPU、内存和磁盘的剩余数量及磁盘读写速度)表示。NPARSA根据作业类型自主选择节点性能评价指标的权值,实现节点实时性能对于作业类型的自适应。实时性能最优的节点分配给作业。虚拟机实验和物理集群实验表明,与Spark默认资源分配算法、没有考虑作业类型与节点匹配的算法、使用作业和节点匹配差异程度作为资源分配依据的算法相比,NPARSA能更有效地缩短作业执行时间、提高集群性能。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

高科技武器装备发展推动作战理念的创新

结合美国在近几年的几次局部战争中所使用的高科技的信息化武器装备、远程作战武器和精确打击武器等武器装备,研究分析了高科技武器装备的发展动态,促进产生了一些新的作战理念(战术战法、作战理论),如网络中心战、夺取制信息权、非对称作战和非线性作战,而新的作战理念又推动了高科技武器装备的完善和进一步发展。同时还分析了高科技武器装备目前尚存在的一些不足。     

基于ForCES体系结构的IPv6路由器的研究与实现

分析了开放网络体系结构研究现状,并在ForCES体系框架下提出一个OpenRouter路由器结构模型,该模型由四个逻辑层次组成,三个标准的API对路由器进行功能模块化分离,使标准模块化路由器实现成为可能。在此基础上,重点介绍了遵从OpenRouter结构模型的IPv6路由器系统的实现及关键技术。