Firm embedding behavior of annular grooved projectiles impacting ductile metal targets

Annular grooved projectiles (AGPs) have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates. They could become embedded solidly in the target surface during low-velocity impact. In this investigation, the firm embedding behavior of AGP was observed by impact experiments. Corresponding numerical simulations provided a better understanding of this process. Experimental and numerical results indicated that the firm embedding behavior of AGP was mainly due to the filling-material in the groove rather than the friction between the projectile and target, unlike traditional shape such as conical projectile. According to observation, firm embedding process can generally be subdivided into four stages: initial-cratering stage, groove-filling stage, filling-material failure stage and rebound vibration stage. Moreover, the damage mechanics of target material around crater was obtained through microscopic tests. A comparison of the cross-sectional figures between the experiment and simulation proved that the analysis and the proposed method were reasonable and feasible, which further demonstrated that the firm embedding behavior has application potential in new concept warheads.     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

高密度存储服务器高速链路设计与仿真

针对高密度存储服务器中高速链路结构复杂、信号速率高、链路长度长等特点,在高速链路PCIE3.0和SAS3.0设计过程中引入全面的信号完整性仿真。通过对高速印刷电路板设计中拓扑结构、材料类型、印刷电路板结构等关键项目进行仿真设计,获得成本最低、性能达标的最优方案;通过全链路有源仿真,预估系统性能,降低系统投产风险;通过系统实际信号测试,验证系统性能完全满足相应规范要求,仿真结果有效可靠。     

自动离合器控制系统中高速开关电磁阀的特性研究

高速开关电磁阀是一种结构简单,易于实现数字控制的电液伺服系统控制元件.尝试在自动离合器控制系统中用高速开关电磁阀对离合器进行控制;设计了驱动机构,由高性能单片机产生脉宽调制信号控制高速开关电磁阀的工作;建立了高速开关电磁阀的数学模型并进行了仿真计算.     

电传动装甲车辆发动机发电机系统动态模型

针对电传动装甲车辆发动机-发电机系统建模难的问题,采用BP神经网络辨识发动机转矩,设计了发动机-发电机系统动态实验,在测得发动机在不同油门开度时的转速动态响应,并将电励磁旋转整流同步发电机等效为直流发电机的基础上,建立发动机-发电机系统动态模型。仿真与实验对比结果表明：模型满足车辆仿真精度要求。     

增程修正弹单炮多发同时弹着火控技术研究

针对大口径火炮使用增程修正弹打远修近问题,建立了增程修正弹单炮多发同时弹着的控制算法,仿真验证了算法可在不同射程上实现单炮多发同时弹着,对发挥舰炮作战效能具有一定的意义。     

高速旋转弹位置与姿态测量数据分析方法

精确的弹箭位置与姿态测量数据是提高制导弹箭射击精度的基础。通过分析高速旋转弹位置与姿态传感器的量测噪声,采用卡尔曼滤波方法进行误差估计,以提高测量精度。基于高速旋转弹质心运动和角运动方程,建立了系统状态方程;根据全球定位系统和地磁传感器的测量原理,建立了量测方程;以某弹飞行数据为例,采用扩展卡尔曼滤波(EKF)和无味卡尔曼滤波(UKF)分别对弹箭的位置和姿态进行最优估计。仿真结果表明,采用上述方法可有效减少系统误差,并使综合误差进一步降低,射程与高度误差均控制在±1 m,攻角和侧滑角误差分别为±0.02 rad和±0.01 rad,可满足工程应用的要求。     

几种排水型高性能船阻力性能对比研究

采用阻力理论计算方法,以高速圆舭艇的阻力性能为基准,对高速圆舭艇、深V型船、穿浪双体船以及高速三体船的阻力性能进行了对比研究,对比较结果进行了分析,给出了各船型的最适用航速范围.     

基于公理设计理论的某自行炮弹仓结构分析

公理设计在设计过程中提供一种描述设计目标的框架,设计者以这一框架作向导进行产品设计,使设计过程形式化,设计决策易于理解,并对设计的预期质量进行评价;应用公理设计方法对某自行炮全自动弹仓结构进行了分析,并提出了一种基于公理设计理论的某自行炮弹仓部件设计顺序。     

火箭弹防静电作用研究

针对电发火弹药静电放电问题,以某型130 mm火箭弹为例,采用真实静电感度测试系统测试了电火工品在有、无绝缘层时50%的静电点火能量,并在试验程序及数据处理中使用真实静电感度数据处理方法统计了50%静电发火能量的估计值。通过比较发现二者的差值在误差范围内,这表明静电放电研究中可以将弹体所接受的能量视作全部作用于火工品上,绝缘层不吸收静电放电的能量。在电发火弹药的防护中,必须采用静电防护措施杜绝电发火弹药的意外发火。