基于约束满足的多目标对地观测卫星成像调度

EOS(对地观测卫星)成像调度需要根据用户提出的成像任务需求确定卫星成像序列,是一个复杂的组合优化问题。考虑到成像侧视约束条件,建立EOS成像调度的多目标有向无环约束图模型。在此模型的基础上提出了基于SPEA2(strength pareto evolutionary algorithm 2)的多目标成像调度算法,采用约束控制技术设计遗传算子处理成像约束。经过三个实际的多目标成像调度问题测试,表明该算法可以有效地解决EOS成像调度问题。     

火炮火控系统命中解的分布和存在性

定义了火控系统中问题联立方程应满足的“基本假设”,从理论上讨论了在“基本假设”条件下诸命中解的分布特性 ,证明临近的命中解 (如果存在的话 )是唯一的 ,给出了临近解存在的充分必要条件。用一个简单的实例表出不同目标速度下诸命中解分布的实验数据     

M739引信头部触发机构发火模式与判别方法研究

针对M739引信头部机构的基本结构与特性,分析其头部触发机构的发火原理,提出发火模式种类的判别方法。结合某型引信的具体参数,计算其对钢板、胶合板和地面三种不同目标介质射击时的碰击力,分析碰击力、防雨机构静态下移抗力及支筒图定抗力对发火模式的影响。试验结果表明,该发火模式判别方法适用于M739系列引信。     

许地山小说中宗教救赎的流变

宗教救赎是许地山小说的创作意图和重要特质，它或隐或显地贯穿于许地山的整个小说创作中。他的小说对现实人生和终极理想进行了交错关注，而宗教救赎的意涵也在关注中不断变化。     

维修性增长趋势检验研究

对即时改进和延缓改进两种维修性增长规划方式进行了趋势检验研究.针对即时改进的维修性增长规划方式,提出了趋势检验的图示法和Laplace方法.针对延缓改进的维修性增长规划方式,根据修复率(第i阶段的修复率为μi)的顺序约束条件:∞>μm≥…≥μi≥…≥μ2≥μ1>0,探讨了指数分布和正态分布维修性增长趋势检验的区间估计法,并结合数值例说明了这些方法的可行性.     

一种变结构导引律及其在垂直命中制导中的应用

基于变结构控制理论 ,提出了一种垂直命中目标的导引律。该导引律在引入理想的视线角基础上 ,所设计的切换函数不仅保证脱靶量为零 ,而且能同时达到垂直命中目标的目的。数字仿真表明 ,该导引律与最优垂直命中导引律相比 ,不仅适用范围广 ,而且具有良好的鲁棒性能。     

小子样条件下弹头落点CEP计算方法

针对目前武器射击试验中弹头落点子样小 ,评估其CEP难的特点 ,提出一种简明实用的计算方法 ,由仿真计算表明 ,它比GJB5 2 6A— 98的点估计较优 ,此方法可在工程上予以应用     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Shock wave is emitted into the plate and sphere when a sphere hypervelocity impacts onto a thin plate. The fragmentation and phase change of the material caused by the propagation and unloading of shock wave could result in the formation of debris cloud eventually. Propagation models are deduced based on one-dimensional shock wave theory and the geometry of sphere, which uses elliptic equations (corresponding to ellipsoid equations in physical space) to describe the propagation of shock wave and the rarefaction wave. The “Effective thickness” is defined as the critical plate thickness that ensures the rarefaction wave overtake the shock wave at the back of the sphere. The “Effective thickness” is directly related to the form of the debris cloud. The relation of the “Effective thickness” and the “Optimum thickness” is also discussed. The impacts of Al spheres onto Al plates are simulated within SPH to verify the propagation models and associated theories. The results show that the wave fronts predicted by the propagation models are closer to the simulation result at higher impact velocity. The curvatures of the wave fronts decrease with the increase of impact velocities. The predicted “Effective thickness” is consistent with the simulation results. The analysis about the shock wave propagation and unloading in this paper can provide a new sight and inspiration for the quantitative study of hypervelocity impact and space debris protection.     

控制速度方向的弹道修正导引方法

由于制导炮弹由身管武器发射,其飞行控制能力和导引信息量有限,故基于预测落点位置偏差量来修正速度方向并在控制时间内连续分配导引指令的思想提出一种新的三维末制导方法。根据非线性弹道方程组的级数解预测弹丸落点位置,得到落点与目标的偏差,并提出两种通过此偏差解算当前速度方向修正量的方法。取剩余飞行时间为修正时间,通过将速度方向修正量分配到整个剩余导引段建立加速度修正公式,从而减小导引指令饱和的可能性。通过连续地预测落点和分配加速度指令来实时地导引飞行。仿真结果表明:该导引方法简单可行,精度高,对控制能力要求较低,且具备较好的制导效果和毁伤效果,可为该体制制导炮弹的应用提供参考依据。