某型飞机短周期模态特性分析

对纵向短周期模态方程进行了推导和简化,分析了短周期模态的成因和影响的因素,以某型飞机为例计算了本体的短周期模态参数变化规律,分析了其不足,并提出改进方法并进行了计算验证,得到了较好的结果。     

基于测速定轨的一类自适应样条滤波方法

提出了一种测速定轨的实时算法。该方法基于样条表示飞行轨道速度参数 ,在只有多个测速元信息的情况下 ,建立了自适应Kalman滤波递推算法 ,实时给出了较高精度的飞行器轨道参数     

致伤因素及其对目标综合效应的估算方法

本文综述了致伤因素对目标的致伤效果,取决于击中的部位和释放能量的多少,且随着击中部位和因素的改变而不同。指出各因素对目标的致伤作用既有相互影响又有其独立性。并给出了致伤因素对目标综合效应的估算公式。     

提高惯导系统Unscented卡尔曼滤波实时性技术

Unscented卡尔曼滤波(UKF)通过构造一组,具有与给定状态估计相同的一、二阶矩,也可能是高阶矩的样本点,实现对非线性系统的状态估计,因此其计算效率取决于能够捕获这些数字特征的样本点数目.通过构造n 2个样本点来捕获n维状态变量的均值和方差,提出了将这种方法应用于惯性导航的初始对准.仿真结果表明在同等滤波精度的情况下,该方法比UKF计算效率更高,实时性更好.     

爆轰波在可压缩金属板面上斜反射初始参数的计算

本文计算了爆轰波在可压缩金属板面上斜反射时的初始参数。计算中选用的五种炸药是TNT(p_0为1.64g/cm~3,1.45g/cm~3)、RDX(p_0为1.59g/cm~3,1.76g/cm~3,1.80g/cm~3)、RDX/TNT(77/23)(p_0为1.75g/cm~3)、Pentolite(p_0为1.65g/cm~3,1.68g/cm~3)和B 炸药(p_0为1.71g/cm~3);三种介质是铁、铜和铝。     

Real-time calculation of fragment velocity for cylindrical warheads

To simulate explosion fragments, it is necessary to predict many variables such as fragment velocity, size distribution and projection angle. For active protection systems these predictions need to be made very quickly, before the weapon hits the target. Fast predictions also need to be made in real time simulations when the impact of many different computer models need to be assessed. The research presented in this paper focuses on creating a fast and accurate estimate of one of these variables - the initial fragment velocity. The Gurney equation was the first equation to calculate initial fragment velocity. This equation, sometimes with modifications, is still used today where finite element analysis or complex mathematical approaches are considered too computationally expensive. This paper enhances and improves Breech’s two-dimensional Gurney equation using available empirical data and the principals of conservation of momentum and energy. The results are computationally quick, providing improved accuracy for estimating initial fragment velocity. This will allow the developed model to be available for real-time simulation and fast computation, with improved accuracy when compared to existing approaches.     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

鱼雷衡重特性对初始弹道的影响分析

建立了鱼雷水下空间弹道数学模型,并针对鱼雷不同的衡重特性,采用四阶龙格库塔法和全选主元高斯消去法进行了仿真计算,分别研究了不同自由角、管制舵角和初始速度时初始弹道的变化规律.仿真结果表明,在质量相对较小、质浮心距离较大时,鱼雷初始弹道更易出现拱水现象,因而不适于在浅深度发射;在质量相对较大、质浮心距离很小时,鱼雷初始弹道出现较大袋深,发射时要求大深度海区.这些现象只能在一定程度上通过调整管制舵角、自由角和发射初始速度来克服.     

基于"姿态矩阵"量测的机载导弹传递对准技术

"速度+姿态"量测匹配方案是目前比较理想的机载导弹传递对准技术.采用"姿态"量测时存在矩阵计算量大等缺点,在具体工程应用时更会受到计算机速度的限制,尤其是需要快速进行卡尔曼滤波计算时.引入了一种与"姿态"量测具有相同特点的"姿态矩阵"量测方案,设计了快速对准卡尔曼滤波器,并进行了仿真分析.结果表明是一种具有工程意义的实用快速传递对准技术.     

牵顶伞对大型降落伞抽打现象的作用

对某大型降落伞系统的拉直过程进行多阶段、多有限段和多自由度的动力学建模。通过仿真研究了牵顶伞和剥离带等改进措施对主伞拉直后伞衣抽打现象影响,重点分析比较了带与不带牵顶伞时伞衣位形、抽打速度、偏离距离等参数的变化,分析结果可为大型降落伞的工程设计、改进和使用提供理论支持。