惯性定位系统阻尼零速修正方法

在惯性定位系统中,零速修正是系统进行误差控制的一项有效重要手段.结合工程实际应用,利用阻尼技术,推导并提出了一种零速修正方法.该方法在分析系统零速修正误差模型基础之上,设计合理的阻尼回路,将周期性停车时系统自身的速度信息作为阻尼信息,阻尼系统周期性振荡误差,从而提高系统的定位精度.理论分析和实验结果表明,阻尼零速修正方...     

一种基于“GM(1,1)”模型的火炮初速灰预测方法

火炮初速量测是火炮进行弹道准备中的一项重要内容,运用灰色理论探讨火炮初速预测问题,既有利于提高火炮射击精度的修正,又有利于进一步完善火炮初速测量雷达的使用操作和改进设计。针对火炮初速随机变化的特点,基于灰色理论中的GM(1,1)模型,构建火炮初速灰预测模型,确定预测结果精度检验方法。最后通过一应用实例验证了该方法具有一定的合理性与实用性。     

Performance study of jute-epoxy composites/sandwiches under normal ballistic impact

This study is undertaken to explore the use of natural fiber Jute-epoxy (JE), Jute-epoxy-rubber (JRE) sandwich composite for ballistic energy absorption. Energy absorbed and residual velocities for these composites are evaluated analytically and through Finite Element Analysis (FEA). FE analysis of JE plates is carried out for different thicknesses (3, 5, 10 and 15 mm). JE plates and JRE sandwiches having the same thickness (15 mm) are fabricated and tested to measure residual velocity and energy absorbed. The analytical results are found to agree well with the results of FE analysis with a maximum error of 9%. The study on JE composite plate reveals that thickness influences the energy absorption. Experimental and FE analysis study showed that JRE sandwiches have better energy absorption than JE plates. Energy absorption of a JRE sandwich is about 71% greater than JE plates. Damages obtained from FEA and testing are in good agreement. SEM analysis confirms composites failed by fiber rupture and fragmentation.     

A three-stage model for the perforation of finite metallic plates by long rods at high velocities

A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the perforation of a thick metallic plate by a long rod can be divided into three stages: (1) initial penetration; (2) plug formation and (3) plug slipping and separation. Various analytical equations are derived which can be employed to predict the ballistic limit, residual velocity and residual length of the long rod. It is demonstrated that the present model predictions are in good agreement with available experimental results for the perforation of finite steel targets struck normally by steel as well as tungsten alloy long rods at high velocities. It is also demonstrated that the dynamic maximum shear stress of a plate material has strong effect on plug formation and plug thickness which, in turn, exerts considerable influence on the residual velocities and lengths of a long rod at impact velocities just above the ballistic limit.     

地月转移轨道的天基测向初轨确定研究

研究了利用天基测向数据对地月转移轨道的初轨确定。天基平台分别考虑采用单颗卫星和星座卫星,研究了观测数据的噪声平滑,分析了观测弧段长度和观测几何对两种平台的定轨精度的影响,基于数值分析结果,研究了初定轨中系统差的消除。研究结果表明,星座双星同步定轨比较适用于地月转移轨道的天基测向初定轨。     

均匀设计法在建立PELE爆裂效应关系模型中的应用

为了研究钢壳体PELE爆裂效应与影响因素之间的数学关系,对钢壳体PELE侵彻钢板进行了数值仿真和试验。采用均匀设计法设计仿真工况,将仿真结果进行回归分析,得出爆裂效应与影响因素之间的数学关系式,实弹侵彻实验结果与仿真结果基本吻合。研究表明,影响因素均与壳体爆裂长度成非线性关系,增大靶板厚度、弹芯长度和着速或减小壳体厚度均有利于提高钢壳体的爆裂效应。相关结论为PELE的工程设计和应用提供了理论基础。     

铁基非晶纳米晶涂层的耐磨性研究

采用基于机器人的自动化高速电弧喷涂技术在45钢基体上制备了FeCrBSiMnNbY非晶纳米晶涂层。研究了非晶纳米晶涂层在油润滑条件下,不同磨损时间、速度、载荷对涂层的磨损行为。采用扫描电镜（SEM）、能谱分析仪（EDAX）和X射线衍射仪（XRD）对涂层的组织结构进行了表征,利用纳米压痕仪对涂层的力学性能进行了分析,摩擦磨损试验在MM200滑块磨损试验机上进行。结果表明：涂层组织均匀,结构致密,主要由非晶相和α-Fe相纳米晶组成;在相同磨损试验条件下,非晶纳米晶涂层的相对耐磨性为3Cr13涂层的4．6倍,磨损机制主要为脆性疲劳剥落。     

FeAlCrNbB金属间化合物复合涂层的制备与表征

研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。     

低速冲击下玻璃钢/钢复合结构损伤特性实验研究

考虑基体材料的不同增韧特性,针对两种不同的玻纤织物增强复合材料/钢复合结构进行低速冲击实验,采用超声波探伤仪对玻璃钢损伤区域进行了探测.结果表明,采用增韧基体的玻璃钢/钢复合结构在低速冲击下玻璃钢层的抗冲击能力更强,相同能量冲击下的损伤面积更小;损伤面积近似呈正方形分布,正方形对角线与纤维方向一致.