基于多阶段博弈模拟的作战飞机零部件备用分析

从决策优化的角度出发,提出了一种利用多阶段博弈模拟来分析和解算作战飞机零部件备用的方法.该方法首先分析了多阶段博弈模拟在作战飞机零部件备用的应用,给出了最优化问题的总的目标函数一般形式.然后转换和简化所得到的最优化问题目标函数形式,从而有利于零部件备用的最优化解算.最后,给出了多阶段博弈模拟分析算法的主要步骤.仿真结果表明,这种方法解决了零部件使用模型问题求解的不精确的分析方法.将零部件使用周期作战飞机零部件备用看成一个整体来分析,符合未来网络中心战作战飞机零部件使用备份追求整体效能最大的思想.     

军用履带车辆电传动匹配计算

为给军用履带车辆电传动部件选型提供理论依据，对某车型的双侧电机传动方案中驱动用永磁同步电动机及主要部件的性能参数进行了匹配计算，并根据车辆对驱动系统大转矩和宽调速范围的要求，提出了驱动电机必须具备的过载能力和弱磁能力，最后利用仿真手段验证了计算方法的有效性。     

舰船汽力装置变工况性能的图形化处理

应用现代计算机图形处理方法动态地描述舰用蒸汽动力装置及其设备的变工况性能数据，包括用图形交互的方式输入、显示和保存数据等关键内容．该方法已用于实际工程分析．     

Polymer composite for antistatic application in aerospace

The phenomenon of static electricity is unpredictable, particularly when an aircraft flying at high altitude that causes the accumulation of static charges beyond a threshold value leading to the failure of its parts and systems including severe explosion and radio communication failure. The accumulation of static charges on aircraft is generated by the virtue of interaction between the outer surface of aircraft and the external environmental attributes encompasses air particles, ice, hail, dust, volcanic ash in addition to its triboelectric charging. In the recent years, advanced polymer-based composites or nanocomposites are preferred structural constituents for aircrafts due to their light weight and comparable mechanical properties, but such composite systems do not render low impedance path for charge flow and are subsequently vulnerable to effect of lightning strike and precipitation static. In this context, it is essential to develop conductive composite systems from non-conductive polymer matrix by nanofiller embodiments. The advent of carbon-based nanocomposite/nanomaterials have adequately addressed such issues related to the nonconductive polymer matrix and further turned into an avant-garde genre of materials. The current review envisioned to illustrate the detailed exploitation of various polymer nanocomposites in addition to especially mentioned epoxy composites based on carbon fillers like carbon black, carbon nanotube (single walled carbon nanotube and multi walled carbon nanotube) and graphene the development of antistatic application in aircraft in addition to the static charge phenomenon and condition for its prevalence in avionic systems.     

坦克发动机自行加温过程研究

为改进坦克发动机冷却系统,以12150L型坦克发动机为例,通过建立公式对发动机自行 加温过程进行了计算,得出不同条件下冷却液温度随时间的变化关系;并通过试验验证。由此为改进冷 却系统提供了理论依据。     

测试系统静电干扰的仿真实验研究

由于静电干扰的随机性和测试手段的限制 ,难以定量计算静电对测试系统的影响程度。基于人体静电模型和器件模型 ,导出用起电率表示的静电干扰对测试系统影响的仿真计算式 ,并计算出了一般静电环境下静电干扰的具体值 ,为测试系统的干扰计算和静电防护提供了依据     

双环交叉负反馈放大电路的分析计算

以新基本放大器为基础 ,在推导出各单环放大器的计算公式的前提下 ,推导出了双环交叉负反馈放大电路分析计算的通用公式     

采用双天线载波相位差技术的卫星导航接收机抗欺骗方法

针对欺骗干扰信号难以有效实时模拟真实卫星信号空间分布特性的特点,提出利用双天线载波相位差进行欺骗信号检测的方法。分析载波相位差计算的各种误差源,并在此基础上建立针对欺骗信号的二元假设检验。通过理论分析和仿真实验,验证了所提欺骗信号检测技术的有效性,并得出了天线阵基线越长、入射方位角越小,载波相位差检测技术对欺骗信号的检测性能越优的结论。