等截面隔离段中激波串结构的数值模拟

采用二阶TVD格式的有限体积法偶合Baldwin Lomax代数湍流模型求解雷诺平均Navier stokes方程 ,数值模拟了二维矩形等截面隔离段中的流动现象 ,很好地模拟出由激波 /附面层干扰所形成的复杂的激波串流场结构。计算结果与国外有关文献的结果进行了比较。     

火炮装药温度分布的数值模拟

针对火炮弹药的特点,建立了弹药的二维轴对称模型,并在圆柱坐标系下,用控制容积积分法导出一组差分离散格式。采用收敛速度快的块迭代法解代数方程组。实验数据表明数值计算的结果和实测值基本一致,经进一步研究可以用于火炮装药的温度测量。     

进气口位置和进气体积流量对油罐油气惰化置换效率的影响

采用机械通风方式对油罐油气进行处理,具有安全性差、通风时间长和效率低下的缺点;利用燃惰气对油罐油气进行处理,可较好地克服上述缺点。在前期研究的基础上,设计模拟实验台架,以燃惰气为介质,实验研究进气口位置和进气体积流量对燃惰气惰化置换油罐油气的影响。     

Russian Reactions to Reagan's ‘Maritime Strategy’

The US Navy's audacious Maritime Strategy of the 1980s is often credited with acting as a key catalyst to the demise of the USSR. In assessing the role of strategic missile submarine “bastions” in the country's overall military strategy, the authors are skeptical of the above thesis, explaining that Moscow actually viewed deployments of Tomahawk land-attack cruise missiles on to US submarines (versus direct threats against the Soviet Navy itself) as the most alarming threat. The authors concede that the arms race played a role in the collapse of the USSR, but deny a direct connection with Soviet naval development citing the relatively minor naval proportion of overall defense spending. For the difficulties facing the fleet at the end of the Cold War, they instead blame deep systemic problems internal to the Soviet Navy.     

碳纤维混凝土单轴受压应力-应变本构关系

碳纤维混凝土受压应力-应变全曲线研究是对其基本力学性能进行全面认识的基础,也是表现碳纤维混凝土基本受压特性的综合宏观反映。对9组（碳纤维体积分数分别为0,0.2%,0.4%,0.6%,0.8%,1.0%,1.2%,1.4%,1.6%）碳纤维混凝土试件进行了立方体和棱柱体抗压强度试验,结果表明碳纤维混凝土立方体和棱柱体抗压强度随碳纤维体积分数的增加呈下降趋势,峰值应变随碳纤维体积分数的增加呈增大趋势。基于各体积分数碳纤维混凝土的棱柱体抗压强度和峰值应变的试验数据,拟合得到了棱柱体抗压强度和峰值应变与体积分数之间的函数表达式。利用微机控制电液伺服压力试验机测定了9组碳纤维混凝土应力-应变全曲线,参照非线弹性理论的混凝土单轴受压应力-应变本构模型,根据测得的全曲线应力-应变数据,拟合得到了应力-应变全曲线上升段表达式参数和下降段表达式参数,最后给出了基于碳纤维体积分数变化的碳纤维混凝土单轴受压应力-应变本构方程。     

Maintenance scheduling for modular systems: Modeling and algorithms

We study new models of scheduled maintenance management for modular systems, consisting of multiple components with respective cycle limits. The cycle limit of each component specifies the time interval in which this component must be repaired or replaced. The goal is to compute a feasible maintenance schedule that minimizes the cost associated with component maintenance. Applications of these models arise in Air Force aircraft maintenance as well as in other arenas with required preventive maintenance. The typical cost structures that arise in practical settings are submodular, which make the resulting models computationally challenging. We develop two efficient and operationally tenable approximation algorithms. We prove constant factor worst‐case guarantees for both algorithms, and present computational experiments showing that these algorithms perform within a few percent of optimality on operationally relevant instances. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 472–488, 2014     

用于有限体积法的中心WENO混合格式

通过理论推导得到6阶中心格式与5阶WENO格式相结合的混合格式(CWENO6格式),为了提高有限体积法中高精度格式的计算效率,引入3阶MUSCL反卷积方法以取代传统有限体积法中的反卷积方法。通过不同的算例比较了CWENO6格式与WENO5格式的数值表现。结果表明,相比于传统的WENO5格式,在网格量相同的前提下,由于数值耗散较小,CWENO6格式对流动细节的描述更为准确,为有限体积法模拟三维多尺度复杂提供了一种更为有效的方法。     

高精度有限体积法与间断有限元法的比较研究

本文通过数值算例,比较了高精度有限体积法以及间断有限元法在求解不同问题时表现。研究发现：在精度相同的条件下,间断有限元法的计算误差要明显小于有限体积法;间断有限元法的重构过程与高精度有限体积法相比较为简单,但高阶情形下解多项式的自由度较多并且需要计算体积分,因此整个求解时间较长;在同样精度条件下,高精度有限体积法的计算效率要明显高于间断有限元法。降低时间积分时解多项式的自由度数目是实现高精度算法在实际问题中应用的重要手段。     

Optimal control policies in service systems with limited information on the downstream stage

Existing models in multistage service systems assume full information on the state of downstream stages. In this paper, we investigate how much the lack of such information impacts jobs' waiting time in a two‐stage system with two types of jobs at the first stage. The goal is to find the optimal control policy for the server at the first stage to switch between type‐1 and type‐2 jobs, while minimizing the long‐run average number of jobs in the system. We identify control policies and corresponding conditions under which having no or partial information, the system can still capture the most benefit of having full information.     

飞机再次出动保障活动设计方法

飞机再次出动保障活动所需时间长短对提升飞机的作战效能至关重要,针对当前在飞机保障资源有限约束条件下,再次出动保障活动工期最短难以实现的难题,提出了基于分支切割法的再次出动保障活动时间优化方法。该方法以飞机再次出动保障活动所需时间最短为目标,以有限的保障人员和保障作业间逻辑关系为约束条件,可计算出时间最短的飞机再次出动保障活动具体流程,并用VB6.0编制成计算机程序,开发了飞机再次出动保障活动分析系统。最后,对某型飞机真实保障活动进行了实例分析,结果表明,使用该方法计算得到的结果准确、可靠,与实际保障情况相符,可为飞机再次出动保障与决策提供指导,提升保障活动的自动化水平,具有很好的工程应用价值。