一种改进方位向非线性CS大斜视角SAR成像算法

大斜视角SAR成像时存在严重的距离走动现象,慢时域的距离走动校正在解决这一问题同时导致了聚焦深度问题.分析了二维频域解耦合后残余相位误差以及时域走动校正后的多普勒调频率误差,提出一种改进的方位向非线性CS算法,校正了三次以上距离迁徙带来的相位误差,同时采用改进非线性CS扰动方程补偿了随方位偏移量线性变化的调频率误差.仿真结果表明,改进算法的大斜视角大场景成像性能优于传统的高分辨大斜视角成像算法.     

一类线性规划模型的求解方法

应用矩阵理论知识得到了一类特殊的线性规划模型的相关定理,给出了一种简便求解方法,讨论了求解方法的推广问题.     

A generic model of motor‐carrier fuel optimization

Fuel optimizers are decision models (software products) that are increasingly recognized as effective fuel management tools by U.S. truckload carriers. Using the latest price data of every truck stop, these models calculate the optimal fueling schedule for each route that indicates: (i) which truck stop(s) to use, and (ii) how much fuel to buy at the chosen truck stop(s) to minimize the refueling cost. In the current form, however, these models minimize only the fuel cost, and ignore or underestimate other costs that are affected by the models' decision variables. On the basis of the interviews with carrier managers, truck drivers, and fuel‐optimizer vendors, this article proposes a comprehensive model of motor‐carrier fuel optimization that considers all of the costs that are affected by the model's decision variables. Simulation results imply that the proposed model not only attains lower vehicle operating costs than the commercial fuel optimizers, but also gives solutions that are more desirable from the drivers' viewpoint. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

机动目标一维距离像RAT法线性化补偿

研究了机动目标宽带线性调频脉冲回波全去斜率信号模型,根据速度和加速度的调频频谱展宽特点,提出了机动目标宽带一维距离像线性化调频回波模型,给出了Radon模糊图转换(RAT)法线性参数估计与运动补偿方法,并进一步分析了测速和测距误差.仿真实验验证了RAT法一维距离像线性化参数估计与补偿,表明该方法很好地解决了运动参数未知情况下机动目标的一维距离像频谱展宽问题.     

基于分数阶傅立叶变换的ARM检测技术

分数阶傅立叶变换(FRFT)是傅立叶变换的广义形式,对线性调频(LFM)信号具有很好的能量积累作用.针对反辐射导弹(ARM)雷达回波信号的线性调频特性,提出了一种基于FRFT的反辐射导弹检测方法,并根据ARM信号的调频特性将FRFF局域化,缩小了峰值搜索区域,提高了检测效率.仿真实验表明该方法能够在高斯、非高斯分布杂波环境下有效地检测ARM信号.     

海洋环境中基于WVD的LFM信号检测方法

海洋环境中弱信号的谱与海杂波的谱相混叠 ,目标和背景的位置差异很小 ,经典的频域或空域处理对海杂波中弱信号的检测难以奏效。鉴于Wigner-Ville分布 (WVD)对线性调频信号 (LFM )具有时频聚集性这一特点 ,提出了一种海洋环境中基于WVD的LFM信号检测方法。利用雷达采集的真实海杂波数据 ,在不同信杂比的条件下 ,研究了该方法与经典频域法在信号检测中的差别。通过实验分析 ,与经典方法相比 ,该方法具有明显的优越性 ,且信杂比达到 -14 . 3dB时 ,其仍能很好地对信号进行检测。