基于可组合服务的陆军作战仿真模型集成

陆军仿真模型体系的复杂性决定了其建模与集成的复杂度,本文基于模型组件化技术,设计了模型组件库、对象库,通过逻辑组合实现了基本库和作战单元库,并以可组合的模型服务实现不同分辨率、异构模型的聚合集成目标,使得陆军作战仿真模型具备模块化、可复用、可扩展和可控制的应用特点和战技术性能。     

潜射无人机及其对潜艇作战带来的变化

从水下航母的历史出发,简述了现代战争对潜射无人机的需求,分析了潜艇(尤其是核潜艇)装备潜射无人机的优势和给作战带来的变化,说明了它对发展水下航母的重要性。之后,以美国潜射无人机研发为例,总结了其研究进展,探讨了它目前面临或需要解决的问题,表明了其发展方向。     

超声波辅助微波消解预处理测量污泥金属元素

以实验室污泥和污水厂污泥为研究对象,建立了超声波辅助微波消解预处理测量污泥金属元素的方法与程序。首先通过超声波分散污泥絮体,然后对污泥进行加热预处理和微波消除,最后采用火焰原子吸收法测量污泥中的金属元素。结果表明,150 W超声波作用于25 mL污泥3 min为超声波分散污泥的较优条件,能保证后续操作过程取样均匀。微波消解前适宜的加热预处理条件为90℃,20 min。实验室污泥微波消解的较优酸体系为2 mL双氧水＋4 mL反王水（或4 mL王水）;污水厂污泥微波消解的较优酸体系为1 mL氢氟酸＋2 mL双氧水＋4 mL王水,同时,第3阶段消解条件为压强2.0 MPa下消解20 min。超声波辅助微波消解预处理具有用酸量少、简易快捷、准确度和精密度高等优点,测量K,Ca,Mg,Fe的相对标准偏差≤2.75%,加标回收率为97.5%～102%。     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

基于营区精、气、神文化表达的自然仿生设计

精、气、神文化是营区规划设计的核心.自然仿生设计为营区精、气、神文化的表达提供了独特而有效的方式.通过对营区精、气、神文化的解读,发掘出自然仿生的3个层面,即“形”之仿生,“意”之仿生和“结构”之仿生.在营区规划设计中,当自然仿生的这3个层面得到有效表达,实现有机统一,营区就会产生独特的文化气质与魅力,从而体现其精、气、神特色,展现部队的“军营魂”.     

雷达虚拟维修训练中交互系统的通用性

基于USB接口技术对"通用雷达装备虚拟维修训练系统(URVMTS)"的人机交互系统进行研究,通过合理的软、硬件设计实现了系统的通用性。不同的实装操作部件经过适当的信号调理均可以通过该系统方便地实现与雷达虚拟样机之间的交互。着重介绍了交互系统的通用性设计与实现方法,包括系统的通用性设计方案,USB硬件电路的通用性设计及相应的软件开发。     

聚能射流形成过程的理论建模与分析

分析了聚能射流的形成过程,并对其中的各阶段进行了详细建模。在模型中考虑了炸药爆轰、金属的驱动、药型罩压垮以及射流和杵体的形成过程。采用该模型对某一聚能装药结构进行了计算,计算结果表明:药型罩顶部和底部微元的压垮速度较小,在射流头部形成反向速度梯度,与试验数据吻合较好。该模型对于多级侵彻战斗部的工程设计与侵彻参数的计算具有一定的参考价值。     

Optimization of resistance spot brazing process parameters in AHSS and AISI 304 stainless steel joint using filler metal

The aim of this research study was to determine optimal resistance spot brazing parameters for joining between AHSS and AISI 304 stainless steel by using filler metal. The key parameters investigated in this study consist of the brazing current, electrode pressure and brazing time. The Taguchi method was applied to the design of experiments. Signal-to-Noise ratio was introduced in the study to identify optimal levels from the process where input parameters yield increased shear strength. Brazing was thus implemented with 5,000A brazing current, 0.70 MPa electrode pressure, and 1.50s brazing time. The maximum shear strength obtained was 54.31 N·mm⁻² in accordance with input parameter settings. In addition, Cu-rich phase and Ag_0.4Fe_0.6 intermetallic phases were found at the interface zone.     

Effect of fusion welding processes on tensile properties of armor grade,high thickness,non-heat treatable aluminium alloy joints

AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.     

Analysis of a machine repair problem with an unreliable server and phase type repairs and services

In this paper we study a machine repair problem in which a single unreliable server maintains N identical machines. The breakdown times of the machines are assumed to follow an exponential distribution. The server is subject to failure and the failure times are exponentially distributed. The repair times of the machine and the service times of the repairman are assumed to be of phase type. Using matrix‐analytic methods, we perform steady state analysis of this model. The time spent by a failed machine in service and the total time in the repair facility are shown to be of phase type. Several performance measures are evaluated. An optimization problem to determine the number of machines to be assigned to the server that will maximize the expected total profit per unit time is discussed. An illustrative numerical example is presented. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 462–480, 2003