内腐蚀缺陷尺寸对DN150承插管线承压能力的影响

为了科学地指导DN150承插管线的使用与管理,采用非线性有限元法对带内腐蚀缺陷的DN150承插管线进行了剩余强度的评估。通过分析和计算,研究了腐蚀缺陷宽度、长度和深度对管线极限承载能力的影响。结果表明：腐蚀缺陷宽度对DN150承插管线的承载能力影响很小,可忽略不计;随着腐蚀缺陷长度的增加,管线的承载能力略微减小,当缺陷长度达到150mm,管道失效压力基本不变;随着腐蚀缺陷深度的增加,管道失效压力呈线性递减,其对管道失效压力的影响程度远远大于腐蚀缺陷长度。     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

钢框架梁柱焊接连接抗震性能试验研究

以梁端腹板的扇形孔形状为主要参数,进行了4个足尺钢框架梁柱焊接节点往复加载下的破坏试验。通过对弯矩—塑性转角和弯矩—累积塑性变形倍率试验曲线对比分析表明,扇形孔是节点变形能力和破坏形式的主要影响因素。改进扇形孔构造是一种有效措施,既可提高节点的抗震性能,又能保持制作工艺与传统节点基本相同。     

海战场舰艇反潜作战的优化配置研究

针对海战场舰艇反潜作战行动的特点,为增大反潜作战能力进行优化配置。在建立数学模型的基础上,以舰艇搜索突击群有效搜索带宽度为主要因素以及其他诸如概率参数的相关要素对反潜搜索能力进行优化配置,从而获得最大反潜搜索能力和最佳作战行动效果。该方法可以较好地为海战场作战行动的模拟仿真和实际应用提供理论依据和决策参考。     

水声目标机动检测与跟踪

当今海战场水声目标往往采用机动方式航行,打破了目标匀速直线运动假定的传统。通过对水声目标的机动模式分析,可将目标的运动轨迹近似为折线运动进行研究。提出了水声目标的机动检测与跟踪方法,简化机动检测的复杂度,最后讨论了对机动目标长时跟踪的策略。     

Some probability functions in reliability and their applications

There has been much research on the general failure model recently. In the general failure model, when the unit fails at its age t, Type I failure (minor failure) occurs with probability 1 ? p(t) and Type II failure (catastrophic failure) occurs with probability p(t). In the previous research, some specific shapes (constant, non‐decreasing, or bathtub‐shape) on the probability function p(t) are assumed. In this article, general results on some probability functions are obtained and applied to study the shapes of p(t). The results are also applied to determining the optimal inspection and allocation policies in maintenance problems. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

微波脉冲对硅基双极型晶体管的损伤特性

利用微波脉冲注入实验平台,对硅基双极型晶体管低噪声放大器进行了损伤效应实验。在微波脉冲对硅基双极型晶体管低噪声放大器损伤的失效分析中,当低噪声放大器增益下降大于10d B时,发现硅基双极型晶体管出现了永久损伤。通过对比测量硅基双极型晶体管损伤前后的电特性以及利用扫描电子显微镜观测损伤后晶体管的微观特性发现:硅基双极型晶体管被微波脉冲损伤后,基区的硅材料烧蚀导致发射结和集电结短路,不再具有PN结特性,导致器件失效。     

适用于海底观测网络的恒流远供系统可靠性分析方法

以水下单元的短路/开路故障模式为基础,提出一种分析缆系海底观测网络恒流远供系统可靠性的方法。根据系统供电和结构特性,将系统分成不同的供电链路和链路段。详细研究处于不同位置的各种水下单元发生故障时,对链路和观测设备的供电状态的影响。归纳导致系统和各链路无法正常导通、观测设备无法得到供电的状态情况,分析不同故障状态发生的概率,进而得出求解系统、供电链路与供电设备的供电可靠度的方法。通过算例分析,进一步梳理了3种供电可靠性的共性规律,说明在设计和建设恒流远供系统时,应综合考量这3种供电可靠性。     

基于正交试验法的冗余捷联惯组故障诊断实验方法研究

冗余捷联惯组是运载火箭控制系统的重要设备,需要对其进行故障检测和隔离以保证系统正常工作,所应用的故障检测算法需要进行有效性评估。由于惯组器件配置和故障形式的多样性,所有故障情形进行逐一测试不可能的,因此提出利用正交试验法安排实验,对广义似然比故障检测算法进行性能检测。试验结果表明应用正交试验实现了故障情形的良好覆盖性,有效减少了试验次数,并且从测试数据中验证了故障检测算法的有效性。     

Understanding the ‘failure’ of the Séléka rebellion

This paper examines the downfall of the Séléka rebellion, which staged a coup in the Central African Republic in March 2013. The coup plunged the country into violence and chaos, and there has been an uneasy quest for peace ever since. This article explains why the leader of the rebellion lost control over his troops and was finally pushed by regional actors to leave power. The article concludes that the Séléka rebellion was already fragile and, together with the poor leadership demonstrated by the coalition leader, the rebellion was unable to hold on to power.