用电化学方法评价油膜防锈性能

用电位—时间、多重动电位扫描两种电化学方法对防锈油的防护性能进行了分析和评价 ,并与盐水浸渍试验进行了对照。结果表明 :两种电化学方法不仅与盐水浸渍试验具有良好的相关性 ,而且能够反映油膜下金属腐蚀的细微特征 ,是研究和评价防锈油较好的方法     

红外技术及其在消防领域中的应用

介绍红外技术及其在消防领域中的应用,其应用主要包括电气防火检查、火灾探测、火情侦察和灭火救援等方面.     

基于遗传算法的涡轮增压器叶轮优化设计

提出了一种基于遗传优化理论的涡轮增压器叶轮的优化设计方法,论述了以涡轮增压器叶轮能量损失最小为目标函数,以叶轮叶片进口角、进口直径、进口宽度、出口直径、叶片数、出口角为设计变量的涡轮增压器叶轮的优化设计模型及优化计算的方法,数值计算表明,这种算法可以方便地求得具有最小涡轮损失的涡轮叶形参数.     

两点源干扰情况下数据积累点数对雷达测角精度的影响

两点源干扰是干扰被动雷达导引头 (PRS)的有效手段。但在实际应用中 ,两点源的功率不可能完全相等 ,这就为PRS对抗两点源的干扰提供了契机。通过理论分析和仿真实验证明 ,当两点源偏离导引头的电轴方向不大的情况下 ,只要保证足够的积累点数 ,导引头进行数据积累取均值 ,其结果并不指向两源的“重心”或“质心”而是指向两源中功率较大者 ,并给出了确定积累点数的解析表达式     

多级可修备件库存的生灭过程建模与优化

针对VARI-METRIC模型在低可用度下结果不准确的问题,建立基于生灭过程的任意等级、任意层级可修件库存优化模型。通过对各级站点、各类备件需求率与到达率的预测,对每个部件建立其生灭过程模型,并提出基于生灭过程的装备可用度计算方法。以整个保障系统的装备可用度为约束指标,以备件总购置费最低为目标,利用边际算法得到最优备件配置方案,并建立仿真模型对所得优化方案进行评估与调整。结合算例,以仿真结果作为检验标准,选取权威的VMETRIC软件与该解析模型在优化性能、计算精度及适用性上进行对比和说明。结果表明,无论是解析模型还是VMETRIC软件,均存在一定的适用范围,而采用解析与仿真相结合的方法无疑具有更强的适应性。     

Optimal service and arrival rates in Jackson queueing networks

In this paper we present an algorithm for solving a class of queueing network design problems. Specifically, we focus on determining both service and arrival rates in an open Jackson network of queueing stations. This class of problems has been widely studied and used in a variety of applications, but not well solved due to the difficulty of the resulting optimization problems. As an example, consider the classic application in computer network design which involves determining the minimum cost line capacities and flow assignments while satisfying a queueing performance measure such as an upper limit on transmission delay. Other application areas requiring the selection of both service and arrival rates in a network of queues include the design of communication, manufacturing, and health care systems. These applications yield optimization problems that are difficult to solve because typically they are nonconvex, which means they may have many locally optimal solutions that are not necessarily globally optimal. Therefore, to obtain a globally optimal solution, we develop an efficient branch and bound algorithm that takes advantage of the problem structure. Computational testing on randomly generated problems and actual problems from a health care organization indicate that the algorithm is able to solve realistic sized problems in reasonable computing time on a laptop computer. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 1–17, 2000     

Optimal (τ, T) opportunistic maintenance of a k‐out‐of‐n:G system with imperfect PM and partial failure

The opportunistic maintenance of a k‐out‐of‐n:G system with imperfect preventive maintenance (PM) is studied in this paper, where partial failure is allowed. In many applications, the optimal maintenance actions for one component often depend on the states of the other components and system reliability requirements. Two new (τ, T) opportunistic maintenance models with the consideration of reliability requirements are proposed. In these two models, only minimal repairs are performed on failed components before time τ and the corrective maintenance (CM) of all failed components are combined with PM of all functioning but deteriorated components after τ; if the system survives to time T without perfect maintenance, it will be subject to PM at time T. Considering maintenance time, asymptotic system cost rate and availability are derived. The results obtained generalize and unify some previous research in this area. Application to aircraft engine maintenance is presented. © 2000 John Wiley & Sons;, Inc. Naval Research Logistics 47: 223–239, 2000     

用于DDR3访存优化的数据缓冲机制

为提高DDR3控制器访存效率,设计了基于DDR3存储器预取访问数据长度的数据缓冲机制,将访存请求分为三种基本类型并分别排队处理,降低数据丢弃和实际动态随机访问存储器访问发生次数。针对图像和视频类应用程序的实验结果表明,相对于传统先到先服务的DDR3访存控制器,该机制取得了平均21.3%、最好51.3%的性能提升,硬件开销在可接受范围内。     

飞机飞行控制律多目标优化设计研究

针对传统飞行控制律参数单目标优化设计不能同时满足多控制指标要求,且与飞行品质要求缺乏相关性,物理意义不明确等缺点,提出了一种基于改进NSGA-II算法的飞行控制律多目标优化设计方法。在该算法中提出了一种分化进化策略,使得进化搜索过程中染色体群可以自适应分化为数量和构成动态调整的子群,避免了多染色体子群对局部最优区域的重复搜索,维持染色体的多样性,有效抑制了早熟收敛现象发生。最后,使用改进的NSGA-II算法对某型飞机横航向控制律设计进行数值仿真,结果显示提出算法有效提高控制律优化调参效率,结果满足期望的飞行品质要求。     

基于蚁群算法的防空C3I系统火力分配模型研究

针对当前火力分配问题实现难度大的特点,分析各种火力分配优化方法的优缺点,运用新型蚁群算法尝试解决WTA问题。建立了基于蚁群算法的火力分配优化模型,描述了解火力分配问题的一般步骤,通过实例给出了算法,解决了WTA问题。并与匈牙利法相比较,结果表明该方法的合理性和有效性,特别是在武器—目标数较大时,其效率要高于常用的匈牙利法。