高超声速圆球绕流流场及其近尾尾迹流场电磁散射特性分析

采用分段线性电流密度递归卷积时域有限差分(PLJERC FDTD)方法计算高超声速导电金属球绕流流场及其近尾尾迹流场电磁散射特性,分析等离子体绕流流场RCS的频率特性、双站散射特性、极化特性及随飞行高度、飞行马赫数、入射角的变化关系.计算表明,前向散射方向是全方位散射中RCS取得最大值的方向;马赫数较大(本文Ma≥14)时,入射波频率增大、马赫数增大及飞行高度降低,绕流流场前向RCS增大.马赫数较小(本文Ma≤10)时,飞行马赫数、高度及入射角变化对绕流流场UHF、L、S波段后向RCS和双站RCS影响很小;在UHF、L波段,绕流流场及本体的后向RCS差距较小.马赫数较大时,大范围过密等离子体尾迹的形成使得电磁波垂直轴线入射时绕流流场增大了目标本体的后向RCS;在L、S波段,绕流流场后向RCS曲线可用一条直线逼近.     

超声速气液两相流液化升压装置研究

基于超声速气液两相流升压原理的水蒸气液化升压装置具有液化迅速、出口压力高的特点,但是两相流升压的物理过程十分复杂,目前分析模型中考虑的参数较少,对细节刻画不够全面.针对这一问题,文章建立了两相流分析模型,考虑了液滴与水蒸气的传热、传质过程,分析了冷却水温度、引射比、混合室收缩比、过冷度和速度滑移比对性能的影响;得到了激波前的压力、干度、空泡份额与引射比的关系,以及凝结激波前后的温度和压力与引射比的关系.计算结果表明:为提高系统性能.需要尽可能地提高液体的雾化程度,降低冷却水的温度,同时将引射比控制在6～8附近;如果设计合理,装置的升压系数可达3倍以上.     

海峡两岸出入境管理问题研究

从出入境管理的角度,分析两岸人员往来管理工作的现状及存在的问题,提出海峡两岸出入境管理工作要适应当前出入境人员大进大出、快进快出的形势,简化出入境手续,切实保障海峡两岸“三通”的顺利进行,进而推动两岸的交流与合作。     

复合成本计算中合理设定复合元数问题研究

从合理性和科学性角度对复合成本计算过程中复合元数的设定进行了评价。运用模糊数学方法建立了评价矩阵,通过模糊合成使评价结果更加切合实际,解决了企业成本管理中复合元数判断的模糊性和不确定性问题,避免了复合成本计算过程中因复合元数设定不经济或简单化而出现的功能过剩或功能不足的现象出现。     

雾化液滴在气道内的动力学特性及其影响因素

基于单颗粒动力学,用Lagrangian方法建立了液滴在气道内运动的数学模型,用Runge-Kutta法对液滴运动方程进行了数值求解,得到了液滴速度、相对雷诺数和阻力系数沿气道轴向的变化规律,并分析了重力场、液滴粒径、液滴初始速度、液滴出射角度对液滴运动轨迹的影响.结果表明,液滴在气道内的运动分为变速段和恒速段,液滴粒径、初始速度及出射角度等因素对雾滴的运动轨迹也有很大影响,雾滴运动分析时一般不应忽略重力场的作用.     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

A generic model of motor‐carrier fuel optimization

Fuel optimizers are decision models (software products) that are increasingly recognized as effective fuel management tools by U.S. truckload carriers. Using the latest price data of every truck stop, these models calculate the optimal fueling schedule for each route that indicates: (i) which truck stop(s) to use, and (ii) how much fuel to buy at the chosen truck stop(s) to minimize the refueling cost. In the current form, however, these models minimize only the fuel cost, and ignore or underestimate other costs that are affected by the models' decision variables. On the basis of the interviews with carrier managers, truck drivers, and fuel‐optimizer vendors, this article proposes a comprehensive model of motor‐carrier fuel optimization that considers all of the costs that are affected by the model's decision variables. Simulation results imply that the proposed model not only attains lower vehicle operating costs than the commercial fuel optimizers, but also gives solutions that are more desirable from the drivers' viewpoint. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

进气道角度对含硼推进剂固冲发动机性能的影响

为了提高含硼推进剂固体火箭冲压发动机内硼颗粒的燃烧效率,采用颗粒轨道模型进行了补燃室两相流的数值模拟,其中硼颗粒的点火和燃烧模型采用的是King模型,建立了发动机补燃室内简单反应流模型,在该模型下研究了进气道的位置对非壅塞固体火箭冲压发动机燃烧效率的影响,并在此基础上进行直连式试验研究.结果表明,后进气道角度为60°时的燃烧效率比90°时高.     

基于循环子空间理论的线性系统测试矩阵优化

研究了线性定常系统在循环指数大于1(即其约当标准形不同的约当块有重根)的情况下测试矩阵的优化方法.以循环子空间相关定理的证明为基础,根据根向量链的相关特性,得到了测试向量的线性和与系统观测性的直接关系,给出了在保证系统可观测性的同时,使得测试代价最小的测试矩阵优化方法.算例表明,提出的方法简单直观,对配置测试向量具有良好的工程价值.     

攻角对双三角翼旋涡特性影响的数值模拟

采用数值方法研究了双三角翼上涡流运动随攻角的变化规律.计算取层流假设,研究了攻角在5°～30°,76°/40°后掠双三角翼绕流的流场结构随攻角的变化,并对双三角翼上涡破裂现象对流场结构及气动力性能的影响进行了分析.结果表明,双三角翼上的多涡结构存在强烈的相互影响,较大的攻角会导致涡破裂在翼面上发生,严重影响了双三角翼的气动力性能.