防空布势模式的系统动力学模型研究

制空权在现代战争中的地位和作用十分重要,防空兵力的布势模式是防空方夺取制空权的重要条件。明确了要地防空与区域防空的基本概念,基于系统动力学理论,建立了防空布势模式的简化系统动力学模型,通过不同模拟结果的比较,印证了区域防空理论的先进性,并作出了相应的对策分析。     

基于系统动力学的导弹综合防护体系仿真

在未来高技术战争中,弹道导弹武器的作用越来越大,它已成为各国战略威胁手段和对敌实施纵深打击的主要力量之一,也是敌攻击的首选目标,因此对导弹阵地综合防护体系的研究就显得十分重要.在给出导弹阵地综合防护体系的框架后,建立了基于系统动力学的综合防护体系模型,在不同仿真条件下对模型进行仿真并分析了仿真结果,得出了对综合防护体系效能影响大的因素.     

大口径顶置火炮输弹机动力学研究

为解决大口径顶置火炮弹药自动装填系统的关键技术问题,提出了大口径顶置火炮输弹机各工作阶段的力学模型和动力学方程,并通过输弹速度与时间的计算分析,得到了3种输弹方式的输弹速度与时间关系曲线,其结果对大口径顶置火炮供输弹系统的研究具有较大参考价值。     

Adaptive control of track tension estimation using radial basis function neural network

Track tension is a major factor influencing the reliability of a track. In order to reduce the risk of track peel-off, it is necessary to keep track tension constant. However, it is difficult to measure the dynamic tension during off-road operation. Based on the analysis of the relation and external forces depending on free body diagrams of the idler, idler arm, road wheel and road arm, a theoretical estimation model of track tension is built. Comparing estimation results with multibody dynamics simulation results, the rationality of track tension monitor is validated. By the aid of this monitor, a track tension control system is designed, which includes a self-tuning proportional-integral-derivative (PID) controller based on radial basis function neural network, an electro-hydraulic servo system and an idler arm. The tightness of track can be adjusted by turning the idler arm. Simulation results of the vehicle starting process indicate that the controller can reach different expected tensions quickly and accurately. Compared with a traditional PID controller, the proposed controller has a stronger anti-disturbance ability by amending control pa-rameters online.     

Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

混凝土板模爆方法数值模拟研究

分析混凝土结构在1/4模型中应变率对于爆炸相似律的影响,并用数值模拟的方法进行混凝土板的模爆方法研究,得出混凝土板在爆炸作用下复印比例定律近似成立的结论。考察数值模拟中产生计算误差的原因,发现混凝土板模型在采用4cm网格时会出现较大的计算偏差,其原因部分是由于网格尺寸引起的,部分是由于计算采用的混凝土局部损伤失效模型引起的。     

考虑黏弹性材料随机性的被动约束层阻尼梁动力学分析

采用传递函数方法研究了阻尼层黏弹性材料随机性对被动约束层阻尼(PCLD)梁动力学特性的影响。由Hamilton原理建立了PCLD梁六阶运动微分方程,通过引入状态向量,建立了系统的状态空间方程,利用传递函数方法得到了梁的固有频率和损耗因子。以黏弹性材料分数导数模型中的参数作为基本的随机变量,并假设其服从正态分布,使用Monte Carlo直接抽样法考察了材料模型参数的随机性对结构固有频率和模态损耗因子的影响。计算结果表明黏弹性材料参数的随机性对梁动力学特性的变异系数影响较大,模态损耗因子的变异系数最大值是材料参数变异系数的4.5倍。     

基于SD的科研项目管理动态仿真初探

为解决管理中的动态、非线性等复杂性问题,将系统动力学方法引进到科研项目管理中,依据系统动力学原理,对科研项目管理系统进行因果关系分析并建立了流图模型.实例仿真结果表明:系统动力学方法为科研项目管理的正确决策提供了科学依据.     

Boltzmann 方程求解方法综述

本文论述了Ｂｏｌｔｚｍａｎｎ方程的求解方法，在分析了各类求解方法的优缺点之后指出目前Ｍｏｎｔｅ－Ｃａｒｌｏ直接模拟方法是解决稀薄气体动力学问题的最佳方法。     

冗余并联机构的PD控制

采用并联机构的简化树动力学模型 (reducedtreemodel) ,给出了冗余并联结构的动力学方程和基于PD控制策略的控制方法。为了消除冗余并联机构固有的内作用力 ,给出了一种基于静态力平衡的控制方法。最后 ,利用一个 2自由度的冗余平面并联机构作为控制实例 ,实验结果表明了控制方法的正确性